(AAT). Cal Spas Portable Spa

20

Aquatic Air Therapy

TM

(AAT)

LED Lighting

Press the LIGHT button on the topside control panel to turn the spa light on. If your spa has perimeter LED lights, they will also light up at the same time as the spa light.

The LEDs operate in three modes:

1. Cycle:

When you continually press the LIGHT button, the LEDs will cycle through the three main LED colors

(Red, Green, and Blue) or combinations of the three that produce the following colors: light green, purple, light blue, yellow, etc.

Each time you press the button, you immediately advance to the next color in sequence or eventually a different light pattern.

2. Flashing:

When you are cycling through all the colors, the next time you push the LIGHT button, the LED lights may start flashing. This is another normal operational pattern option.

3. Fading cycle:

The next phase of operation when you push the LIGHT button is a slow and/or fast fade random transition from one color to the next.

• If a spa is equipped with more than 100 points of light, the Slow Fading Cycle will flicker during a color change.

• Every air valve and water valve is equipped with 4 LED points.

• Every jet is equipped with 2 LED points.

• Perimeter LEDs take 9 points of light.

• The waterfall takes 4 points of light.

Spas with exterior corner LED lighting generally work in the same mode as described above. The variations in color and patterns provide you with multiple options to suit almost any lighting preference.

www.calspas.com

2018 Portable Spa

LTR20181000, Rev. O