System. Cal Spas Portable Spa
advertisement
Cleaning and Maintenance and Sound System
Removing and Reseating the Pillows
You can remove the pillows for cleaning and maintenance quickly and easily. This method works for all types of pillows.
Grab the lower edge of the pillow with both hands firmly and pull up. As you do this, the pillow inserts will pop out of the holes.
Reseat the pillows by aligning the pillow inserts with the holes and striking the pillow hard enough to insert the pegs back into the holes.
35
Jet Removal and Replacement
Jets can be easily removed for cleaning.
Screw-in jet removal
Grasp the outer rim of the jet and turn it counter-clockwise. The jet will unscrew from the fitting until it is free.
To replace the jet, place it in the fitting and turn it clockwise until it is snug in place and it can be rotated freely about half a turn. Do not overtighten the jet.
Snap-in SQR jet removal
Grasp the outer rim of the jet and turn it counter-clockwise until it completely stops.
You may feel it slightly loosen pop out a bit from the fixture. Pull the jet out from the jet fixture. The jet will be very snug and may require some force to remove it. DO NOT PRY
OUT JETS.
To replace any jet, place it in the fitting and turn it clockwise until it snaps in and can be rotated freely about half a turn. Do not overtighten the jet.
2018 Portable Spa
LTR20181000, Rev. O
www.calspas.com
advertisement
