- Sports & recreation
- Camping, tourism & outdoor
- Above ground pools
- Above ground pool accessories
- Cal Spas
- Portable Spa
- Owner's manual
- 60 Pages
Cleaning Your Spa. Cal Spas Portable Spa
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
Cleaning Your Spa
Spa Cover and Pillows
Due to the constant punishment your spa cover and pillows receive, you should protect them by applying a vinyl and leather cleaner as part of your monthly maintenance plan. Use a product that is specifically designed to protect spa covers and pillows from chemical and ultraviolet light damage without leaving an oily residue behind that is normally associated with common automotive vinyl protectants.
Warning:
Do not
use automotive vinyl protectants on spa covers or pillows. These products are generally oil-based and will cause severe water clarity issues that are difficult to correct.
Spa Shell
Each time you drain your spa, before you refill it you should clean your spa shell with an all-purpose cleaner and apply a coat of surface protectant.
Use a low detergent, non-abrasive cleaner specifically formulated to clean the spa without damaging its acrylic finish.
Use a non-oil based surface protectant that is specifically formulated to protect the spa’s finish from the chemicals and minerals associated with normal spa use.
Using the Freedom Sound System
The Freedom Sound System
™
entertainment option contains a Bluetooth-enabled speaker system that is available for certain
Cal Spa models. Any Bluetooth-enabled device can be used to play audio through your spa.
Before you can use the sound system, you need to pair the Bluetooth module with your device. The Bluetooth module is installed within the spa cabinet. Everything can be done with your device. The example shown below is from an iPhone device. Your device may appear differently. Before you begin, make sure Bluetooth in enabled on your device.
1. Select Bluetooth from your device’s option list.
2. Select
SWA8-6BT...
from the list of available devices to pair.
3. Allow your device to pair with the spa’s Bluetooth module.
4. When the devices have been connected, the device
SWA8-6BT...
will be highlighted.
Only one Bluetooth device can be paired with the Freedom Sound System
™
at any time.
Once your device is paired and connected, all sounds from your device will be played through the sound system, including system sounds and telephone.
1 2 3 4
39
2018 Portable Spa
LTR20181000, Rev. O
www.calspas.com
advertisement
Related manuals
advertisement
Table of contents
- 3 Important Safety Instructions
- 4 Pre-Delivery Checklist
- 4 Planning the Best Location
- 5 Preparing a Good Foundation
- 5 Hookup
- 6 240 Volt Electrical Installation
- 7 US & Canada
- 9 120 Volt Electrical Installation
- 9 Testing the 240 Volt GFCI Breaker
- 12 Priming the Pump
- 13 Operating Your Spa
- 13 NEO Control Panel Operation
- 21 ATS Plus Therapy System
- 22 (AAT)
- 22 LED Lighting
- 23 Diverter Knobs
- 23 Air Venturis
- 23 Waterfalls
- 23 Hydro Streamer Waterfall
- 24 Water Clarity
- 25 Water Testing Methods
- 26 Adding Chemicals to the Spa Water
- 28 2. Sanitation and Shock
- 29 3. Filtration
- 30 4. Regularity (Maintenance Schedule)
- 30 Generic Names for Chemicals
- 31 Common Water Chemistry Questions
- 32 Do’s and Don’ts
- 33 Bather Load
- 33 Ozonator
- 34 Troubleshooting Water Clarity Problems
- 35 Bromine Generator
- 36 Generator
- 37 System
- 37 Removing and Reseating the Pillows
- 37 Jet Removal and Replacement
- 38 Draining Your Portable Spa
- 39 Winterizing (Cold Climate Draining)
- 39 Cleaning and Replacing the Filter
- 40 Spa Cover and Locking System
- 40 Vacation Care
- 41 Cleaning Your Spa
- 41 Using the Freedom Sound System
- 42 Appendix
- 42 Replacement Parts
- 55 Basic Troubleshooting
- 57 “Thermal Creep
- 58 Limited Warranty
- 60 Warranty Registration