Operating Instructions. Frigidaire FFET1022UWxx, 1435198, FFBD1831US, FFET1222UVxx, 1435222, 1226839, FFBD1831UB, 1435212, 1842520, FFBD1831US

Add to my manuals
16 Pages

advertisement

Operating Instructions. Frigidaire FFET1022UWxx, 1435198, FFBD1831US, FFET1222UVxx, 1435222, 1226839, FFBD1831UB, 1435212, 1842520,  FFBD1831US  | Manualzz

OPERATING INSTRUCTIONS

Wash Cycles Wash Options Functions Cycle Indicator

Wash Cycle Selections

Cycle times are approximate and will vary with the options selected. Hot water is necessary to activate the detergent and melt fatty food soils. An automatic sensor will check the incoming water temperature. If it is not at the appropriate temperature the timer will delay the cycle to allow automatic water heating during the main wash. When the

High Temp

wash is selected an even higher temperature will be assured to handle heavier soil loads.

temperature is not correct. Certified residential dishwashers are not intended for licensed food establishments.

WARNING

The

Sanitize

option is only available with

Heavy Wash

and

Normal Wash

cycles.

Wash Cycles

Heavy Wash

Recommended for pots, pans, casseroles and dinnerware having light to heavily soiled loads.

Normal Wash

Recommended for lightly to heavily soiled loads.

1 Hour Wash

A shorter wash recommended for lightly soiled loads that do not need drying.

China Crystal

Recommended for lightly soiled China and

Crystal.

Energy Saver

Recommended for lightly soiled and pre-rinsed dishes and silverware.

Rinse Only

Recommended for pre-rinsing dishes or glasses. This is only a rinse that keeps food from drying on your dishes and reduces odor buildup in your dishwasher until you are ready to wash a full load. Do not use detergent.

Wash Options

Press the

Options

button to scroll through the options. The indicator light will illuminate when the option has been selected.

Sanitize

When

Sanitize

is selected, the temperature of water will be maintained at 156.2°F

(69°C) max. The max temperature may not be reached if the incoming water

High Temp

When

High Temp

is selected, the temperature of the water will be maintained at 140°F

(60°C) max.

Heat Dry

When

Heat Dry

is selected, the heater will work during the drying process.

Functions

START/Cancel

Press

START/Cancel

to start a wash cycle.

Press

START/Cancel

and hold for

3 seconds

to cancel a cycle that is already in progress.

Delay

The Delay option allows you to automatically delay starting your dishwasher from 1-24 hours. To start 1-24 hour delay, press the

Delay

button until the desired delay time shows in the display window (1h-24h) and press the

START/Cancel

button. A light will come on indicating the delay start has been activated and will remain on until the cycle starts. To cancel the Delay option and begin the cycle before the delay period is over, press the

Start/Cancel

button and hold for

3 seconds.

Control Lock

Use to lock all controls and prevent children from accidently changing the dishwasher cycle or starting the dishwasher. Press and hold both

Option

and

Delay

, at the same time, for

3 seconds

to lock. After the function is selected the control lock icon will illuminate. Press and hold both

Option

and

Delay

again for

3 seconds

to unlock.

5

6

OPERATING INSTRUCTIONS

Display window

This LED screen displays the minutes remaining in a running cycle, hours of delay before the unit is set to start, error codes, etc.

• If the machine is in operation, the remaining time (mins) of the selected cycle will be shown in the display window.

• If the

Delay

option is selected, the number of hours of delay (1h-24h) will be shown in the display window. After the machine starts, the remaining time of the selected cycle will be shown in minutes on the display window.

NOTE

The remaining time could suddenly increase or drop several minutes. This means the

Smart Sensor has checked the soil level and adjusted the number of fill cycles.

• If an error occurs which is critical to the machines function and safe operation, the control shall shut down and indicate an error code in the display window.

(See Error Codes).

If Error codes are displayed, contact the dealer or qualified service center. They will available to provide assistance in trouble shooting the problem and/or locate and authorized service technician if needed.

Cycle Progress Indicator

The cycle progress indicator lights will illuminate as each stage of the wash cycle is reached.

Delay

When the start of the cycle has been delayed the

Delay

light will illuminate.

Washing

When the dishwasher is washing the load, the

Washing

light will illuminate.

Clean

After the cycle has ended, the

Clean

light will illuminate until the dishwasher door has been opened.

Sanitized

When

Sanitize

is selected, the

Sanitized

light will illuminate after the cycle has ended.

Cycle Chart

Cycle

Heavy Wash

Normal Wash

Energy Saver

China Crystal

1 Hour Wash

Rinse Only

Options available

Sanitize,

High Temp, or

Heat Dry

Sanitize,

High Temp, or

Heat Dry

--

Heat Dry

Heat Dry

Heat Dry

Water usage

5.2 gal.

19.7 liters

2.5–4.9 gal.

9.5–18.5 liters

4.1 gal.

15.5 liters

4.1 gal.

15.5 liters

3.3 gal.

12.5 liters

1.8 gal.

6.7 liters

Cycle Time

155–160 mins.

125–160 mins.

130 mins.

105 mins.

60–100 mins.

20–55 mins.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals