"Swap" Mode. Honeywell KMA28, PMA6000M, BENDIX/KING KMA28
Below you will find brief information for KMA 28. The KMA 28 is a state-of-the-art audio isolation amplifier and audio selector that contains an automatic voice activated (VOX) intercom system. It can switch up to three transceivers and six receivers. The unit also features a six-station voice-activated intercom with IntelliVox circuitry and an integrated 3-light Marker Beacon receiver.
Advertisement
Advertisement
Advertisement
Key features
- Audio Selector Panel
- VOX Intercom System
- Marker Beacon Receiver
- Three Transceiver Switching
- Six Receiver Switching
- IntelliVox Circuitry
- Public Address Function
- TEL Mode for cellular interface
Frequently asked questions
The TEL mode allows the KMA 28 to act as an audio interface between aircraft headphone and microphones and specific aircraft approved (FAA/FCC) cellular telephone equipment.
The KMA 28 has two stereo music inputs.
IntelliVox is a trademark of PS Engineering and is used in the KMA 28 for its automatic voice activated (VOX) intercom system, eliminating the need for manual squelch adjustments.
The KMA 28 is FAA approved under TSO C50c (Audio Amplifiers) and TSO C35d (Marker Beacon Receivers).
The 'SWAP' mode allows the user to switch between Com 1 and Com 2 by depressing a yoke-mounted switch.