Important user information
This manual explains how to install, operate and configure a SL-MOD-GW. This device may only be used for the applications described in this document.
This manual is to be used with a SL-MOD-GW with firmware version 1.6.
These instructions are intended for use by trained specialists in electrical installation and control and automation engineering, who are familiar with the applicable national standards and safety procedures.
Safety Precautions
ELECTRICAL HAZARD
• This equipment must be installed and serviced only by qualified personnel. Such work should be performed only after reading this entire set of instructions.
• Before performing visual inspections, tests, or maintenance on this equipment, disconnect all sources of electric power. Assume that all circuits are live until they have been completely de-energized, tested, and tagged. Pay particular attention to the design of the power system. Consider all sources of power, including the possibility of backfeeding.
• Apply appropriate personal protective equipment and follow safe electrical practices.
• Turn off all power supplying the equipment in which the SL-MOD-GW is to be installed before installing, wiring or removing the SL-MOD-GW.
• Always use a properly rated voltage sensing device to confirm that power is off.
• The successful operation of this equipment depends upon proper handling, installation, and operation. Neglecting fundamental installation requirements may lead to personal injury as well as damage to electrical equipment or other property.
Failure to follow these instructions could result in death or serious injury!
UMSLMODGW-1006 v
Document conventions
Throughout this manual we use the following symbols and typefaces to make you aware of safety or other important considerations:
Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, could result in damage to equipment.
Indicates information that is critical for successful application and understanding of the product.
Provides other helpful user information that does not fall in above categories.
Provides supplemental user information.
Acronym
Command
Placeholder
User input
This typeface is used to introduce acronyms or product names.
This typeface is used to represent commands, prompts, input fields and filenames. In the context of programming it is used for functions, variable names, constants or class names.
This typeface is used to represent replacable text. Replaceable text is a placeholder for data you have to provide, like filenames or command line arguments.
This typeface is used to represent data entered by the user or buttons.
vi UMSLMODGW-1006
