Specifications. Audiovox 1286565, AXT-1200

Add to my manuals
14 Pages


Specifications. Audiovox 1286565, AXT-1200 | Manualzz


This power amplifier has been designed to provide high Quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which it is installed. We therefore advise that you read these instructions very carefully to familiarize yourself with the product and it's features.

Should you require assistance with the installation or wiring so this unit, please call our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.


Maximum Output Power:

Output Impedance:

Frequency Response:

Channel Separation:

Signal / Noise Ratio:

1200 Watts

300 Watts RMS x 2

@ 4 Ohms

2 - 8 Ohms (stereo)

10 - 35KHz. +/-1 dB

60 dB

90 dB



Monday-Friday 8:30am - 7:00pm Eastern

Saturday 9:00am - 5:00pm Eastern

Input Impedance: Low-level 10K Ohms

High-level 100 Ohms

Input Sensitivity:

Filter type:

Low-level 200 mV - 8 V.

High-level 2V - 10 V.

Selectable High/Full/Low-pass

Crossover @ 12 dB/Octave

Filter Crossover: LPF 50-250 Hz (variable)

HPF 50-250 Hz (variable)

Supply Voltage:

Fuse Rating:

Dimensions (W X H X D):

12 volts, negative ground

40 amps.

295 mm X 54.3 mm X 381mm

11-5/8" X 2-1/8" X 15"

* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.



Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals