CHAPTER 5
TECHNICAL SPECIFICATIONS
This chapter includes the technical specifications for 7F06-02 module.
Cabletron Systems reserves the right to change these specifications at any time without notice.
5.1
STANDARDS
IEEE 802.1D
IEEE 802.3i 10BASE-T
5.2
EMI
The EMI requirements of:
• FCC Part 15 Class A
• EN 55022 Class A
• VCCI Class I
5.3
EMC
The EMC requirements of:
• EN 50082-1
• IEC 801-2 ESD
• IEC 801-3 Radiated susceptibility
• IEC 801-4 EFT
5.4
NETWORK INTERFACES
Two FPIMs
7F06-02 FDDI SmartSwitch Interface Module User’s Guide 5-1
Chapter 5: Technical Specifications
5.5
SAFETY
It is the responsibility of the person who sells the system to which the module will be a part to ensure that the total system meets allowed limits of conducted and radiated emissions.
This equipment meets the safety requirements of:
• UL 1950
• CSA C22.2 No. 950
• EN 60950
• IEC 950
5.6
SERVICE
MTBF:
MTTR:
5.7
PHYSICAL
>200,000 hours
<0.5 hour
5.7.1
Dimensions
31.1D x 22.9 H x 3.1 W centimeters
(12.3 D x 9.0 H x 1.2 W inches)
5.7.2
Weight
Unit:1.8 kgs. (4 lbs.)
Shipping:4.5 kgs. (10 lbs.)
5-2 7F06-02 FDDI SmartSwitch Interface Module User’s Guide
