ASSEMBLY PART PICTURES. Dimplex DF2426GB, DF2426 GB, DF2550, DF2426 SS, DF2562
Dimplex DF2426GB, an electric fireplace, provides a realistic flame effect and supplemental heat for your indoor space. It's easy to operate with remote control or manual controls, allowing you to adjust the flame, heat level, and temperature. The heater turns on automatically when the room temperature drops below the thermostat setting, keeping you comfortable and warm. Additionally, the fireplace comes with a built-in safety feature that automatically turns it off in case of overheating.
Advertisement
Advertisement
Advertisement
Key features
- Remote control
- Adjustable flame intensity
- Adjustable heat output
- Easy to install
- Easy to operate
Frequently asked questions
To adjust the temperature, turn the thermostat control clockwise all the way to turn on the heater. When the room reaches the desired temperature, turn the thermostat knob counter-clockwise until you hear a click. Leave in this position to maintain the room temperature at this setting. For additional heat, turn clockwise until you hear the click again and the heater will turn on.
Should the heater overheat, an automatic cut out will turn the fireplace off and it will not come back on without being reset. It can be reset by switching the Main On/Off Switch to Off and waiting five (5) minutes before switching the unit back on.
The fireplace uses two (2) clear chandelier or candelabra bulbs with an E-12 (small) socket base, 60 Watt rating.
To initialize the remote control, place the Main ON/OFF Switch in the OFF position, wait five (5) seconds, and then place the Main ON/OFF Switch in the Remote Control position. Within 10 seconds of changing the switch position, press the ON button located on the remote control transmitter.