Enrolling Codes. ROSSLARE SECURITY PRODUCTS ACF-43, ACF-44, AC-G43

Programming

5.11

Enrolling Codes

5.11.1

Primary Codes Definition

 Primary codes can only be enrolled to an empty user slot, a slot with no existing primary code in the controller’s memory.

 A primary code must be unique; for instance, one user’s primary code may not be the same as that of another user.

 Primary codes cannot be the same as system codes, such as: the normal/secure code or the open code.

 Users possessing a primary code can gain entry during Normal and Bypass modes.

5.11.2

Secondary Codes Definition

 Secondary codes can only be enrolled to a user slot that already includes a primary code.

 A Secondary code need not be unique; for instance, one user’s

Secondary code may be the same as that of another user.

 Secondary codes cannot be the same as any system codes, such as: the normal/secure code or the open code.

 Users possessing secondary codes can gain entry in any mode of operation.

 A Secondary code can be the same as the primary code of any user.

5.11.3

Primary and Secondary Codes Enrolling Methods

There are two methods used to enroll primary and secondary codes: the standard method and the code search method.

 The Standard Method is used when the user slot number, for the user you wish to program, is known. You can program both primary and secondary codes using this method.

 The Code Search Method is mainly used when enrolling a secondary code and the user’s slot code is unknown. The code search method functions only if a user’s primary code is already enrolled and the secondary code is not.

42 AC-F/G4x Family Installation and Programming Manual