Audio Settings. Mitsubishi LT-37131

Add to my manuals
108 Pages

advertisement

Audio Settings. Mitsubishi LT-37131 | Manualzz

60 Chapter 4. TV Menu Settings

Audio/Video Menu, continued

Audio Settings

Analog and Digital Audio Settings

Enter the audio adjustment mode using either the Audio/

Video menu or the AUDIO key. Press AUDIO repeatedly until you highlight the desired audio control, then use to change the setting, which has a corresponding numeric value shown on screen. Values can be adjusted from 0 to

63, with 31 as the midpoint.

Note: The effects of the audio settings of Bass, Treble,

Balance, and Surround affect only the sound heard through the TV speakers.

◊ Bass

Enhances or reduces low-pitched sound.

◊ Treble

Enhances or reduces high-pitched sound.

◊ Balance

Adjusts the level of sound between the left and right

TV speakers.

◊ Surround

Creates simulated stereo and surround effects through the TV speakers. Your choices are:

• Off: No surround effects (default).

• Simulated Stereo: The TV creates a simulated stereo effect when watching a non-stereo program.

• Surround Sound: The TV creates a simulated surround effect when watching a stereo program.

◊ Level Sound

When on, automatically equalizes the volume level when there are significant sound-level differences between program segments, such as between regular programming and commercials.

• To receive the best fidelity with music programs, change this setting to Off.

• When connecting to an A/V receiver, set Level

Sound to Off and turn off the TV speakers to send full dynamics to the A/V receiver.

Analog-Only Audio Settings

You can set analog-only audio settings while viewing either analog or digital sources, but the settings affect only broadcast analog content.

◊ Listen To

Determines how your TV receives a broadcast audio signal and plays the sound you hear.

Your choices are:

• Stereo: Default setting. The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word Stereo is displayed when you tune to a channel broadcasting in stereo.

• SAP (Second Audio Program): Additional monaural sound track that you cannot hear during normal TV viewing. The SAP signal might be related to the program you are watching, (such as a sound track in a foreign language), or it might be unrelated (such as a weather report). If an SAP signal is broadcast, the letters SAP are displayed when you tune to the channel.

• Mono: Reduces background noise. Use when receiving a weak stereo audio signal. All audio is played mono with this setting.

Listen To is not available for digital channels, 1394 devices or devices connected to the INPUT, COMPONENT and HDMI jacks.

Digital-Only Audio Settings

You can set digital-only audio settings while viewing either analog or digital sources, but the settings affect only broadcast digital content.

◊ Language

Determines what possible language you can hear.

Your choices are:

English

French

German

Italian

Portuguese

Spanish

Other

IEEE 1394 Amplifier Settings

Available settings for some MPEG2 amplifiers:

◊ Balance

Adjusts the level of sound between the left and right speakers. The slider range is 0–254, with 127 as the midpoint.

◊ Loudness

When on, makes the audio level more uniform.

◊ Preset

Select the mode that matches the audio source.

Your choices are:

Off

Jazz

Rock

Classical Music

Movie

Speech

◊ Equalizer

Equalizes the sound.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals