Rear panel. Asus DRW-0804P-D

Add to My manuals
46 Pages

advertisement

Rear panel. Asus DRW-0804P-D | Manualzz

Rear panel

12

1 2 3 4 5

1. Audio output

This connector is for an analog audio output cable. This connector is compatible with “Molex 70553”.

Pin Name Description

1 L Left channel audio output

2 & 3

4

G

R

Ground

Right channel audio output

2. Device configuration jumper

These pins allow you to select either Master, Slave, or Cable Select mode for the drive. ( Refer to page 14 for the jumper settings )

Pin Name Switch Status Description

1 MA ON Master mode

2

3

4-5

SL

CS

ON

ON

Slave mode

Cable select mode

Reserved

3. Air vent

This air vent allows air intake to maintain ideal drive temperature.

Make sure the air vent is not blocked by cables or other objects inside the system.

4. Host IDE interface

This connector is for a 40-pin IDE cable to connect the drive to the IDE interface on the motherboard.

5. DC input

This DC connector is for a 4-pin power cable from the system power supply.

ASUS DRW-0804P DVD ± R/RW drive

advertisement

Related manuals