Connecting the drive cables. Asus DRW-0804P-D

Add to My manuals
46 Pages


Connecting the drive cables. Asus DRW-0804P-D | Manualzz

Connecting the drive cables

1. Connect the power cable plug to the power connector on the rear panel.

2. Connect the 40-pin IDE cable plug to the IDE connector, matching the red pin stripe on the cable with Pin 1 on the connector.

3. If your computer has a sound card or an onboard audio feature, connect an audio interface cable to the 4-pin analog audio connector on the rear of the drive. Connect the other end of the audio cable to the connector on the sound card or on the 4-pin CD connector on the motherboard.

All the cable plugs are slotted so that they fit in only one orientation. If a plug does not fit in completely, try reversing it. DO NOT use too much force when fitting the cable plugs.

Power Cable

4-pin Audio Cable

Replace the computer cover according to your computer manual.

IDE Cable

ASUS DRW-0804P DVD ± R/RW drive 17


Related manuals