Accessories for Speeddome Cameras. Abus Eytron HDVR, Eytron NVR, Eytron JPEG2000, Terxon MX, Eytron MJPEG, Secvest 2WAY, Privest, Eytron VMS, Eyseo TVCC40000, Terxon SX

Accessories for Speeddome Cameras

RS-485 matrix RS-485 repeater RS-232 to RS-485 /

RS-422 converter

Interface converter

Front view Front view

Rear view Rear view

With this practical device, you can connect up to three control devices such as a control panel or Eytron systems to speeddomes.

• Inputs: 1x RS-232, 2x RS-485

• Outputs: 4x RS-485, possible to

• connect up to 1200 m of TP cable

Over-voltage protection for each

• channel

Serial data is simultaneously

•

• distributed to all four outputs

Rugged metal housing

Voltage/power: 12 VDC,

• max. 350 mA

Dimensions (WxHxD):

133x76x44 mm

Double the range of the RS-485

BUS signals with this practical repeater.

This converter changes RS-232 data to RS-485 or RS-422 data with a maximum transmission rate of

115.2 kB per second.

• The use of a max. of 32 repeaters / a (theoretical) transmission range of

38.4 km is possible

• Automatic bandwidth detection up

• to 115.2 Kbit/s

Pluggable screw terminal for easy

•

• wiring

LED displays for power and RX

2.5 kV insulation protection

• Over-voltage protection

• Rugged, black metal housing

• Voltage/power: 12 VDC / 350 mA

• Dimensions (WxHxD):

88x27.5x67 mm

• RS-232 connection: D-Sub (DB9) or

•

RJ11 connection

RS-485/RS-422 connection:

•

Connection terminal or RJ11

Signal transmission: 2-wire halfduplex RS-485 / 4-wire full duplex

RS-485/RS-422

• Automatic baud rate detection

• Max. transmission rate: 115.2 KBit/s

• Transmission range: max. 1200 m

•

(depending on transmission rate)

LED display for power supply and

• signal status

Voltage/power:

•

5 VDC / max. 500 mA

Dimensions (WxHxD):

107x25x79 mm

These practical interface converters are indispensable for controlling your cameras via RS-485, regardless of which connections are available.

Serial or USB 2.0 signals will be reliably converted.

• Converts RS-232 to RS-485,

•

• half-duplex

Quick connection in seconds

Driver CD included (TV8468 only)

Article number TV8473 Article number TV8466

Article number

Connection

TV8468 TV8469

USB Serial Article number TV8467

Perfectly under control

Depending on the requirement, the interface converters can be effectively used in different situations. When the RS-485 matrix is used, several domes can be operated on three different control devices. With the aid of one or more repeaters, you can extend the range of the BUS signals by 1200 meters per repeater.

For remote domes, the range is doubled with the aid of a repeater

Control via RS-485

Control via RS-232

Control via RS-485

When the RS-485 matrix is used, up to three control devices can be connected