ABUS Security-Center
Types of alarms
The type of alarm can be determined in various ways via the
Secvest 2WAY. Which alarm is used when, can be defined in the system settings of the Secvest
2WAY.
Secvest 2WAY wireless outdoor sounder
Secvest Sounder
Secvest wireless indoor siren
Internal alarm
In the event of an internal alarm, the alarm only sounds inside the building. The alarm is then given by the panel, the info module and the wireless indoor sounder.
The wireless outdoor sounder would remain silent.
Local alarm
In addition to the above-mentioned sounders, the wireless outdoor sounder now also sounds the alarm. In Germany, the acoustic alarm must be cut off after 3 minutes. The visual alarm remains on.
External alarm
In the event of an external alarm, the alarm is send from every available sounder. At the same time, a call is made to the monitoring station.
Silent alarm
No sounder is activated in this case. However, the system notifies a monitoring station. The silent alarm is primarily used for panic alarm situations.
The new wireless outdoor sounder is a sounder-flash combination, which is entirely wireless. In the event of an alarm, it generates a very loud alarm (105 dB acoustic pressure). In addition to the acoustic alarm, there is a visual alarm in the form of a strip of red
LEDs that can be positioned at the top or the bottom of the siren.
The wireless range is up to 100 meters. The flash light and siren are controlled separately. This means that the flash light can continue to flash, while the acoustic alarm ends after a predetermined period of time. The wireless outdoor sounder is protected against tamper via a cover and tamper-proof switch.
In the event of tamper, the wireless outdoor sounder either automatically sounds the alarm or it passes the tamper message on to the Secvest 2WAY panel.
Depending on the programming, the center either gives or doesn‘t give the command to activate the sounder.
• The latest innovation: Completely wireless
• Acoustic pressure: 105 dB(A) at 1m
• Visual alarm - strip of flashing LEDs
(top or bottom - optional)
• Flash frequency: 1 Hz
• Distance: up to 100m (depending on the ambient conditions)
• Incl. 2 x 3 V alkaline battery pack
(optional: 1 x 7.2 V lithium battery pack - recommended if the siren is regularly exposed to temperatures below 0°C)
• Battery lifespan: approx. 2 years
• Weight: 1,200 g (without batteries)
• Safety class 2
• Environmental class IV
• Operating temperature: -25°C to
+60°C
• Housing material: Polycarbonate
(weather-proof)
• Certifications: EN, F&P, VSÖ, NCP,
INCERT
• Dimensions (WxHxD):
210x300x60 mm
As a purely indoor siren, the wireless siren supports the wireless outdoor sounder and the panel of the Secvest 2WAY with its
90 dB alarm signal in an alarm situation. The siren and the panel communicate with each other on
868.6625 MHz, a frequency that is specially reserved for the security industry. The wireless interior siren can be powered by a battery or a power supply unit. When batteries are used, the lifespan is approx. 2 years. A battery that is becoming weak is indicated to the Secvest
2WAY via the panel and a red LED is illuminated on the siren itself.
• Acoustic pressure: 90 dB
• For acoustical support of the
Secvest and the wireless outdoor sounder
• Power is supplied via a pack of two
3 V alkaline batteries (included in the delivery kit) or a power supply
•
• unit (optional: FU3822)
Battery status display
Easy installation
• Certifications: EN, F&P, VSÖ, NCP,
•
INCERT
Dimensions (WxHxD):
•
122x208x60 mm
Available as of February 2009
Article number FU8220 Article number FU8230