Terxon MX Hybrid Alarm Panel. Abus Eytron HDVR, Eytron NVR, Eytron JPEG2000, Terxon MX, Eytron MJPEG, Secvest 2WAY, Privest, Eytron VMS, Eyseo TVCC40000, Terxon SX

ABUS Security-Center

Terxon MX Hybrid Alarm Panel

Terxon MX hybrid alarm panel / Terxon MX hybrid compact alarm panel

The complex securing of mediumsized and larger properties requires a comprehensive and flexible system that can be expanded at any time. The Terxon MX hybrid system, which can integrate both wired detectors and wireless components, meets this challenge. The system has four partitions and nine alarm zones (incl. tamper zone), which you can expand to 32 alarm zones.

The Terxon MX hybrid compact alarm panel with a significantly smaller housing (AZ4150) is a space-saving alternative. The piezo or process controller Terxon MX alarm panel, which was configured as a hybrid system is setting new standards in the high-end alarm system segment with its flexibility and expandability. Change is a constant part of our environment.

Not having to be rigidly configured is a convenience which the Terxon

MX affords you. It is possible to add or connect a wide variety of detectors at any time. This allows you to quickly react to changing requirements. The comprehensive functions of the alarm panel also satisfy the highest requirements.

• 8 alarm zones for NC contacts or double end of line DEOL

• Expandable to 32 zones (via 3 expansion modules)

• 4-wire BUS connection for up to 4

LCD keypads and 3 zone expansions

(wireless/wired)

• Can be configured as an individual system or a partitioned system

• Integrated telephone dialer with monitoring station protocol

• Hybrid capability: Possible to connect Secvest 2WAY wireless detectors

• PC directly programmable (RS-232) or remotely programmable via modem (AZ5105)

• Incl. keypad with LCD text display

• and 11 languages to choose from

User code and installer code freely

•

• selectable

2 relay outputs (max. 24 VDC / 1 A)

1 transistor alarm output

•

(max.12 VDC / 500 mA)

8 additional transistor output

(max. 12 VDC / 50 mA) or optional, pluggable relay module

• Intended for backup battery

12 V/7 Ah (not included in delivery kit)

• 250x event memory with plain text

•

• and time

Integrated buzzer for alarm

Integrated power supply unit

•

230 VAC / 12 VDC (1.5 mA)

Certifications: VSÖ, Incert, NCP,

F&P

• Dimensions keypad (WxHxD):

113x90x23 mm

• Terxon MX also available in a small housing (AZ4150)

• Dimensions panel (WxHxD):

AZ4100: 390x310x91 mm

AZ4150: 235x235x85 mm

Article number

Version

AZ4100

Hybrid alarm panel

Dimensions panel in mm 310x390x91

AZ4150

Hybrid compact alarm panel

235x235x85

Technical information - connection options on the board

1

COM port:

With this port, you can connect the Terxon MX to a computer.

You can program the Terxon MX via the installation software, or dial into the system remotely via an analog modem.

2

2

8x transistor output:

The switching capacity is 50 mA per output. Thus, they are ideally suited for connecting Terxon add-on components, such as speech dialers, a GSM interface or 2WAY module.

If needed, this switching capacity can be increased to 1A per output using the relay board. Then other external components such as outside lighting, garage doors, etc. can be controlled via the Terxon MX.

1

3

3

PSTN port:

Connect the Terxon MX to a telephone line. Thus, in the event of an alarm, you can transmit a monitoring station protocol or you can confi gure the panel via remote software.

4

4

4-wire expansion BUS:

You can connect up to four keypads to the Terxon MX via the 4-wire BUS. You can also connect up to three 8-zone expansion modules to the BUS (wired or wireless expansion).

BUS keypads 1 - 4

8 zones wireless expansion

8 zones wired expansion

BUS expansion modules 1 - 3

Connection for 8 zones