LISTA DE PARTES DE REPUESTO. DeWalt DXH40FA


Add to My manuals
28 Pages

Below you will find brief information for forced air propane heater DXH40FA. This manual describes the DXH40FA forced air propane heater. It is designed to be used as a construction heater in accordance with ANSI Standard Z83.7/CGA 2.14. This product is designed to provide temporary heating for structures under construction, alteration, or repair. It is not intended for home or recreational vehicle use.

advertisement

LISTA DE PARTES DE REPUESTO. DeWalt DXH40FA | Manualzz

Lista de partes DXH40FA

REF .......... ARTÍCULO.....DESCRIPCIÓN

1 ............ 40801 ............Manija

2 ............ 40860 .............Barril, parte superior

3 ............ 40862 ............Pantalla, radiación

4 ............ 40883 ............Interruptor, límite, superior, 85C

5 ............ 27951 .............Electrodo, ignición

6 ............ 40667 ............Perilla, válvula

7 ............ 40866 ............Válvula, gas, principal

8 ............ 40868 ............Quemador

9 ............ 28082 ............Termocupla

10 ............ 28077 ............Paletas de ventilador, incl. 6,75*0,75

11 ............ 28076 ............Motor 0,74 A

12 ............ 40865 ............Cubierta posterior

13 ............ 40861 .............Barril, parte inferior

14 ............ 40864 ............Base

15 ............ 22113 .............Cable de alimentación

16 ............ 82136 ............Casquillo de alivio de la tensión

* ............ 21007-20 ........Manguera y conjunto del regulador, de 20 pies

*No se muestra en vista en despiece ordenado

8

16

15

advertisement

Key Features

  • Forced Air
  • Propane-fueled
  • Construction use only
  • Thermo-electric ignition
  • Safety features

Related manuals

Frequently Answers and Questions

What is the minimum clearance required from combustible materials?
The minimum clearance from normal combustible materials is as follows: floor - 0 ft (0 m); outlet - 6 ft (1.83m); sides - 2 ft (.61m); top - 6 ft (1.83m).
What type of gas can be used with this heater?
This heater is designed for use with propane only.
What does 'Forced Air' mean in the context of this heater?
Forced Air means that a blower or fan pushes the air through the heater. Proper combustion depends upon this air flow, therefore, this heater must not be revised, modified or operated with parts removed or missing.
How often should the heater be inspected and by whom?
The heater should be inspected before each use, and at least annually by a qualified person.
What type of electrical connection is required for this heater?
The electrical connection and grounding must comply with National Electrical Code - ANSI/NFPA 70 (USA) and CSA C22.1 Canadian Electrical Code, Part 1 (Canada). You will need a properly grounded 3-prong receptacle or extension cord (6 ft (1.83m) in length minimum).