B. Data Label. American Dryer ML-82, ML-82 II, ML 82

Add to My manuals
64 Pages

advertisement

B. Data Label. American Dryer ML-82, ML-82 II, ML 82 | Manualzz

THE DATA LABEL

1. MODEL DRYER

The model number is an ADC number which describes the size of the dryer and the type of heat (gas, electric, or steam).

2. SERIAL NUMBER

The serial number allows ADC to gather information on your particular dryer.

3. MANUFACTURING CODE NUMBER

The manufacturing code number is a number issued by ADC which describes ALL possible options on your particular model.

4. TYPE OF HEAT

The type of heat describes the type heat for your particular dryer; gas (either natural gas or liquid propane [L.P.]), or steam.

5. HEAT INPUT (for GAS DRYERS)

This describes the heat input in British Thermal Units per Hour (BTUH).

6. ORIFICE SIZE (for GAS DRYERS)

Gives the number drill size used.

7. ELECTRIC SERVICE

This describes the electric service for your particular model.

8. GAS MANIFOLD PRESSURE (for GAS DRYERS)

This describes the manifold pressure taken at the gas valve tap.

9. APPLICABLE APPROVAL SEAL(S)

I.E., American Gas Association, Canadian Gas Association.

53

IMPORTANT

MANUAL RESET HI-LIMIT INSTRUCTIONS

FOR PHASE 6 MODELS

This dryer was manufactured with a manual reset burner hi-limit thermostat which is monitored by the Phase 6 computer. If the manual reset burner hi-limit thermostat is open prior to the start of the machine, the dryer will start momentarily and the shut down displaying “burner safety fail” with an audio indication.

If the manual reset burner hi-limit opens during a drying cycle, the display will read “burner safety fail” with an audio indication. If the drum temperature is above 100º F (38º C), the dryer will continue to run with no heat for three minutes or until the drum temperature has fallen below 100º F (38º C). The clear and stop button on the

Phase 6 keypad must be pressed to clear this “burner safety fail” condition. The manual reset burner hi-limit switch must be reset “manually” prior to the start of the next drying cycle.

This hi-temperature condition may be caused due to a restricted exhaust, poor airflow or improper burner oven operation.

The location of the manual reset hi-limit switch is on the right side of the burner box.

IMPORTANT

HEATING UNIT IS EQUIPPED WITH A

HI-LIMIT THERMOSTAT

WHICH MUST BE RESET MANUALLY.

WARNING - DISCONTINUE POWER

TO DRYER BEFORE ATTEMPTING TO

RESET HI-LIMIT.

ADC P/N: 114076

54

advertisement

Key Features

  • Large 22.4 cu. ft. capacity basket
  • 3 HP blower motor
  • Computer control system
  • Gas or steam heating options
  • Variety of safety features
  • Long-lasting, reliable operation

Related manuals

Frequently Answers and Questions

What is the capacity of the ML 82 dryer?
The ML 82 dryer has a large 22.4 cu. ft. capacity basket, suitable for high-volume laundry operations.
What are the heating options for the ML 82 dryer?
The ML 82 dryer can be configured for either gas or steam heating.
What safety features are included in the ML 82 dryer?
The ML 82 dryer is equipped with a variety of safety features, including door switches, lint drawer switches, sail switches, burner and hi-limit thermostats, and a rotational sensor. These features ensure safe and efficient operation.
Download PDF

advertisement

Table of contents