Printer Settings
Other Settings
You can set the following items for other settings.
•
Form Feed Timeout
•
Received Data Dump
•
Printer Function Resetting
•
Resource Protect Mode
•
Auto Continue
•
Duplex Printing Error Detection
•
Stapling Error Detection
•
Service Status Page Printing
How to Display the Others Screen
1 Press the Printer key.
2 Press the S key or the T key to select MENU.
Ready
GO
CANCEL
MENU
3 Press the Enter key.
4 Press the S key or the T key to select Others.
Menu
RAM Disk Mode
Paper Handling
Others
5 Press the Enter key. The Others screen is displayed.
Next, perform the setting referring to the following description of each setting item.
Form Feed Timeout
If this machine does not receive any information indicating the end of data after receiving the last data, the machine waits for a certain time without printing the last page. When the preset time elapses, the machine performs automatically a form feed. If you set the time to 0, the machine does not perform a form feed until GO is manually selected.
1 Display the Others screen. (See
How to Display the Others Screen on page 2-51
.)
2 Press the S key or the T key to select Form Feed
Time Out
.
Others
Back
Form Feed Time Out
Print HEX-DUMP
3 Press the Enter key.
4 Press the < key or the > key to set the time. You can set the time to 0 to 495 seconds in 5 second increments.
Form Feed Time Out
30
sec.
(0 495)
5 Press the Enter key.
2-51
Printer Settings
6 Press the Reset key. The message display returns to the printer basic screen.
Received Data Dump
You can print data received by this machine as hexadecimal codes for debugging programs and files.
1 Display the Others screen. (See
How to Display the Others Screen on page 2-51
.)
2 Press the S key or the T key to select Print
HEX-DUMP
.
Others
Back
Form Feed Time Out
Print HEX-DUMP
3 Press the Enter key.
4 Press the S key or the T key to select OK.
Print HEX-DUMP
Back
OK
5 Press the Enter key. Waiting is displayed and the message display returns to the printer basic screen.
6 At this time, send data to the printer. Dump pages are printed.
7 Press the S key or the T key to select GO.
8 Press the Enter key. Waiting
GO
CANCEL
9 Press the Reset key. The message display returns to the printer basic screen.
Printer Function Resetting
This function resets the printer’s temporary settings (such as the current page orientation and font) to the default settings.
1 Display the Others screen. (See
How to Display the Others Screen on page 2-51
.)
2 Press the S key or the T key to select Printer
Reset
.
Others
Form Feed Time Out
Print HEX-DUMP
Printer Reset
3 Press the Enter key.
4 Press the S key or the T key to select OK.
Printer Reset
Back
OK
5 Press the Enter key. The printer functions are reset.
2-52
Printer Settings
Resource Protect Mode
The resource protect mode protects the resource data such as downloaded fonts and macros and memorizes the PCL resources even if the emulation mode is switched. If you select Permanent, temporary resources are not protected. If you select Perm/Temp, however, temporary resources are also protected.
1 Display the Others screen. (See
How to Display the Others Screen on page 2-51
.)
2 Press the S key or the T key to select Resource
Prot
.
Others
Print HEX-DUMP
Printer Reset
Resource Prot.
3 Press the Enter key.
4 Press the S key or the T key to select Off,
Permanent
or Perm/Temp.
Resource Prot.
Back
Off
Permanent
5 Press the Enter key.
6 Press the Reset key. The message display returns to the printer basic screen.
Auto Continue
If any of the following error messages appears, the error can be cleared and printing can be continued after the preset recovery time elapses (auto continue).
•
Memory Overflow/Press GO
•
Print overrun Press GO
•
KPDL error Press GO
•
File not found Press GO
•
HARD DISK error Press GO
•
RAM disk error Press GO
•
MemoryCard err Press GO
•
Illegal Account Press GO
•
Exceeded Max.out Press GO
•
Account error Press Go
•
Duplex disabled Press GO
•
Add Staples and Press GO
• e-MPS not stored Press GO
•
Opt. ROM error Press GO
Also you can set the time that elapses before auto continue is activated.
1 Display the Others screen. (See
How to Display the Others Screen on page 2-51
.)
2 Press the S key or the T key to select Auto
Continue
.
Others
Printer Reset
Resource Prot.
Auto Continue
2-53
Printer Settings
3 Press the Enter key.
4 Press the S key or the T key to select On or Off.
Auto Continue
Back
On
Off
5 Press the Enter key. If you have selected On, Change # is displayed.
6 To set the time that elapses before auto continue is activated, press the S key or the T key to select
Change #
.
Auto Continue
On
Off
Change #
7 Press the Enter key. The Auto Continue (time) screen is displayed.
8 Press the < key or the > key to input the time. You can set the time to 0 to 495 seconds in 5 second increments.
Auto Continue (time)
30
sec.
(0 495)
9 Press the Enter key.
10 Press the Reset key. The message display returns to the printer basic screen.
Duplex Printing Error Detection
This setting is available if the optional duplex unit is installed. You can select whether or not to display Duplex disabled Press GO when you select duplex printing and specify a paper type that cannot be used for duplex printing such as label.
Setting
On
Off
Processing
• If you select GO, one-sided printing is performed.
• If you select CANCEL, printing is canceled.
One-sided printing is performed.
1 Display the Others screen. (See
How to Display the Others Screen on page 2-51
.)
2 Press the S key or the T key to select Finishing
Error
.
Others
Resource Prot.
Auto Continue
Finishing Error
3 Press the Enter key.
4 Press the S key or the T key to select Proces.
Duplex print
.
Finishing Error
Back
Proces. Duplex print
Staple Setting
5 Press the Enter key.
2-54
Printer Settings
6 Press the S key or the T key to select On or Off.
Duplex Print Process
Back
On
Off
7 Press the Enter key.
8 Press the Reset key. The message display returns to the printer basic screen.
Stapling Error Detection
You can select whether or not to display Add Staples and Press GO when staples have run out while stapling is performed.
Setting
On
Off
Processing
• If you select GO, printing is performed without stapling.
• If you select CANCEL, printing is canceled.
Printing is performed without stapling.
Note This setting is displayed only if the optional finisher is installed.
1 Display the Others screen. (See
How to Display the Others Screen on page 2-51
.)
2 Press the S key or the T key to select Finishing
Error
.
Others
Resource Prot.
Auto Continue
Finishing Error
3 Press the Enter key.
4 Press the S key or the T key to select Staple
Setting
.
Finishing Error
Back
Proces. Duplex print
Staple Setting
5 Press the Enter key.
6 Press the S key or the T key to select On or Off.
Staple Setting
Back
On
Off
7 Press the Enter key.
8 Press the Reset key. The message display returns to the printer basic screen.
2-55
Printer Settings
Service Status Page Printing
The service status page contains more detailed printer setting information than the normal status page. This page is mainly used by the service personnel for maintenance. Use the following procedure to print this page as needed.
1 Display the Others screen. (See
How to Display the Others Screen on page 2-51
.)
2 Press the S key or the T key to select Service.
Others
Auto Continue
Finisher Error
Service
3 Press the Enter key.
4 Press the S key or the T key to select Print
Status Page
.
Service
Back
Print Status Page
Paper Feed
5 Press the Enter key.
6 Press the S key or the T key to select Print.
Print Status Page
No
Print
7 Press the Enter key. The service status page is printed.
8 Press the Reset key. The message display returns to the printer basic screen.
2-56
3 System Menu
This chapter explains the system settings concerning the general operation of this machine.
The principal settings that can be made are shown below.
•
Default Setting Mode
•
Multi-Bypass Tray Settings
•
Browsing and Printing the Total Counter
•
Report Output
•
Language Setting
•
User Adjustment
3-1
