Supplemental 230 Volt Part List. AIRLESSCO 8-10-11 SL810,SL1100,910E,1110E, 910E

REPLACEMENT OF ELECTRICAL COMPONENTS (Cont)

LIQUID CRYSTAL DISPLAY (LCD)

1. Ensure that the power switch is OFF and that the machine is unplugged.

2. Detach the pressure control assembly (Fig. 12, Item 34) from the frame by unscrewing the eight

screws (Fig. 12, Item 35).

3. Disconnect the LCD lead from the the pressure control assembly.

5. Separate the LCD assembly from the frame by undoing the four screws (Fig. 17 Item 6)

6. Disassemble Items 1-6 (Fig 17)

7. Remove and replace LCD Display (Fig. 17 Item 3).

8. Reassemble in reverse order.

NOTE: Do not over tighten the screw and nuts (Fig 17, Item 1 & 6).

This can warp the LCD and damage it.

9. Perform "LCD Calibration Procedure". See page 25.

1

2

3 4 5

6

FIGURE 17

FIGURE 17 PARTS LIST

ITEM NO. PART NO. DESCRIPTION

*

*

5

6

3

4

1

2

117-126

120-046

331-377

117-281

331-360

100-362

Nut (4)

Plastic Washer (4)

Display Board Ass'y

Spacer (4)

Window

Screw (4)

Frame

30

SUPPLEMENTAL 230 VOLT PARTS LIST

MODEL MOTOR & PART NO. BOARD

8 SERIES 1 HP - P.N. 301-058A P.N. 301-364-99

10/11 SERIES 1.25 HP - P.N. 301-255A P.N. 301-364-99