Using the TV Features
Remote Control and TV Controls/Indicators
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching e and E on the batteries to the diagram inside the battery compartment of the remote control.
Push and slide to open.
Remote Control and TV Controls
Buttons located at the right side of the TV will operate the same as these buttons on the remote control.
1
2
3
POWER
CHANNEL
VOLUME
HOME
INPUT
~
• The 5, PLAY and CH + buttons have a tactile dot. Use them as a reference when operating the TV.
Button Description
1 DISPLAY Press once to display the information pertaining to the channel and/or program when available. The OSD (On Screen
Display) will time out in a few seconds or press again to immediately turn off the display. You can also set the display
to show minimal information. See Info Banner on page 43.
2 SLEEP Press repeatedly until the TV displays the time in minutes
(Off, 15min, 30min, 45min, 60min, 90min or 120min) that you want the TV to remain on before shutting off. To cancel Sleep Timer, press SLEEP repeatedly until Off appears.
3 FUNCTION
Buttons
The FUNCTION button indicator lights up momentarily when pressed to show which external equipment the remote control is operating. When the remote control is set to operate the external equipment, these buttons will operate the equipment you choose. You must first press one of these
FUNCTION buttons to operate the corresponding equipment.
See page 25 for programming the remote control.
(Continued)
19
4
5
6
7
8
9
0 qa
Button Description
4 0-9 ENT Press 0-9 to select a channel; the channel changes after two seconds. Press ENT to change channels immediately.
5 Use with 0-9 and ENT to select digital channels.
For example, to enter 2.1, press
2
, ,
1
and ENT.
6 FREEZE Press once to display a frozen image with the current program in a window. Press again to return to the current program.
Freeze
Frozen picture
Current program
~
• With the Freeze feature active, some features are unavailable.
• While the Freeze feature is active, pressing HOME will deactivate Freeze and display the XMB
™
.
• If Parental Lock settings are in use, only the frozen picture view is available and the audio is disabled.
7 CC
8 DMe x
Press to turn on and off the Closed Captions (CC). To
change or customize CC Display, see page 40.
Press to access features in the optional BRAVIA external module. See your dealer or www.sony.com/bravia for more information. The module may not be available in your region.
9 SOUND Press to cycle through different sound settings: Dynamic for enhanced treble and bass, Standard for spoken dialog and
Custom to customize the sound settings including the
Sound Booster setting.
0 FAVORITES Press once to display the stored favorite channel list.
You can store up to 30 channels in your Favorites list.
How to Add to Favorites
While tuned to the channel you want to add to the list, press
OPTIONS and highlight “Add to Favorites”, then press .
A confirmation message of “Channel added to Favorites” will appear for a few seconds.
How to Remove from Favorites
While tuned to a channel that exists in the Favorites list, press OPTIONS and highlight “Remove from Favorites”, then press .
A confirmation message of “Channel removed from
Favorites” will appear for a few seconds.
~
Your Favorites list will be cleared each time you run Auto
Program (see pages 18 and 39 for Auto Program).
qa RETURN Press to go back to the previous screen or exit from the screen when displaying menu items and settings.
20
qs qd qf qg qh qj qk
Button Description ql w; wa qs BD, DVD or STB
Operating
Buttons
When FUNCTION is selected with BD (Blu-ray Disc),
DVD or STB, these buttons operate the video equipment you
have programmed into the remote control. For details, see
“Using Other Equipment with Your Remote Control” on page
27.
&m PREV: Press to replay the current program from the previous chapter mark (if any) or from the beginning of the live
TV cache.
REPLAY: Press to replay the current program for a set period of time.
ADVANCE: Press to advance forward a set period of time when playing back a recorded program.
M & NEXT: Press to advance forward to the next chapter mark
(if any) or to live TV when playing back a recorded program.
m (fast reverse): Press to play a program in fast rewind mode.
H PLAY: Press to play a program at a normal speed.
M (fast forward): Press to play a program in fast forward mode.
X PAUSE: Press to pause playback.
x STOP: Press to stop the playback of a recorded program.
qd THEATER Press to turn on and off the Theater Mode. The picture settings will be set for a cinema-like experience and the audio will be switched to the audio output of the attached speakers of your BRAVIA Theatre Sync audio system.
Your BRAVIA Theatre Sync audio system must be connected
by an HDMI connection to your TV (see page 16 for details).
qf VOL +/– Press to adjust the volume.
qg MUTING Press to mute the sound. Press again or press VOL + to restore the sound.
qh DVR/VCR
Record
Buttons z REC: Press to record. Pressing this button alone starts the recording process.
X REC PAUSE: Press to pause the recording.
x REC STOP: Press to stop the recording.
qj BD/DVD
TOP MENU qk BD/DVD
MENU
Press to display the top menu of the BD/DVD disc.
Press to display the BD/DVD disc menu.
~
• For more information, refer to the operating manual of the connected equipment.
ql POWER Press to turn on and off the external equipment selected by the
FUNCTION buttons 3.
w; TV
POWER
Press to turn on and off the TV.
wa JUMP Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that was selected.
JUMP JUMP
(Continued)
21
22 ws
Button ws WIDE
Description
Press repeatedly to step through the Wide Mode settings:
Wide Zoom, Normal, Full, Zoom. The Wide Mode
settings can be also accessed in the Screen settings (see page
35).
Changing the Wide Screen Mode
(For PC timing, see below)
4:3 Original source
Standard-definition source
16:9 Original source
High-definition source m
Wide Zoom
Normal
Full
Zoom m
Wide Zoom
Normal
Full
Zoom
Changing the Wide Screen Mode for PC Timing
Incoming PC signal
Less than 16:9 PC format
Incoming PC signal
16:9 PC format m
Normal
Full 1
(May not be available in some formats.)
Normal m
(May not be available in some formats.)
Full 1
Full 2
Zoom (May not be available in some formats.)
Zoom (May not be available in some formats.)
~
• It is normal to have a black frame surrounding the picture with all input formats.
wd wf wg wh wj wk
Button Description wd PICTURE Press repeatedly to cycle through the available picture modes:
Vivid, Standard, Cinema, Photo, Custom. (Available options depend on the current mode.) The picture modes can also be accessed in the Picture settings. For details, see
Picture settings on page 32.
wf INPUT Press to display the list of External Inputs and TV mode.
Press repeatedly to toggle through the inputs.
~
• Inputs can be changed by pressing V/v and while the list of External Inputs is displayed.
• See page 42 on setting up the External Inputs labels,
including the Skip feature.
wg V/v/B/b Press V/v/B/b to move the on-screen cursor. Press to select/confirm an item.
wh OPTIONS Press to display a list of convenient functions and menu shortcuts. The OPTIONS menu items vary based on input and content.
Menu Item
Picture
Sound
Motion Enhancer
Speakers
Add to Favorites/
Remove from Favorites
MTS
Alternate Audio
Digital Rating
Screen
Reference Page
See page 32
See page 35
See page 37
See page 39
See page 20
See page 38
See page 39
See page 41
See page 35
wl wj HOME
~
• Motion Enhancer can only be set for the current input.
• When Digital Rating is selected, an icon appears to inform you of the current program's digital rating.
Press to display the TV Home Menu/XMB
™
to access the TV
Home Menu items such as the TV Settings, TV channels and
External Inputs list (see pages 7 and 30).
Product Support
Clock/Timers wk CH +/– wl F1/F2
Sound
Screen
Video Options
TV
Press HOME again to exit the XMB
™
.
Press to scan through channels. To scan quickly through channels, press and hold down either +/–.
Press to select the function of connected components. For
details, see “Using Other Equipment with Your Remote
Control” on page 27.
23
Indicators
2
1
3 4 5
TIMER LAMP POWER
Item
1 Speaker
2 TIMER LED
3 LAMP LED
4 POWER LED
5 (IR) Infrared
Receiver
Description
Outputs the audio signal.
Lights up in orange when the timer is set. This LED will remain lit even if the TV is
turned off. For details, see page 32.
The projection lamp has burned out. Replace it with a new one (see page 44).
Lights up in green when the TV is turned on. Also lights up in red during the diagnostics.
Receives IR signals from the remote control.
Do not place anything near the sensor, as its function may be affected.
24
Programming the Remote
Control
2
3
2
4
Operating Sony Brand Video
Equipment
The remote control is preset as indicated below so that you do not need to program the remote control.
Sony Equipment
BD
DVD
STB
Programmable Code Number
101 (Sony Blu-ray Disc Player)
751 (Sony DVD Player)
801 (Sony Satellite Receiver)
Programming Non-Sony Video
Equipment
Follow the steps below to program your TV’s remote control.
1 In the space provided below, write down the three-digit code of your equipment found on the Manufacturer’s Codes List on page 26.
If more than one code is listed, try entering the code listed first.
Code No.
2 Press simultaneously to light the FUNCTION button.
3 Enter the three-digit code using while the selected button is lit. If the code is not entered within 10 seconds, you must repeat step 2.
4 Press while the FUNCTION button is lit.
The selected FUNCTION button will blink twice if your equipment is programmed correctly and five times if it is not.
To Confirm the Programming
If you can turn on and off the equipment by pressing the green button, then the programming is complete. If not, try the next code listed.
~
• In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s own remote control.
• Any one of the FUNCTION buttons can be programmed to operate other equipment regardless of the labeling. For example, if programmed with the correct code, can operate DVD/VCR combo equipment. This is useful if your equipment does not match the labeled buttons available. Make note of your equipment’s programmed button.
• You may program one equipment per FUNCTION button.
(Continued)
25
Manufacturer’s Codes
DVD Players
Manufacturer Code
Sony 751, 763
755 General Electric/
RCA
Hitachi
JVC
Magnavox
758
756
757
Mitsubishi
Oritron
Panasonic
Philips
761
759
753
757
Pioneer 752, 778
RCA/PROSCAN 755
Samsung
Toshiba
Zenith
758
754
760, 762
DVD/VCR Combo Units
Manufacturer Code
Sony 767
Broksonic
JVC
776
775
Panasonic
Samsung
Toshiba
Zenith
777
774
773
768
HDD/DVD Combo Units
Manufacturer Code
Sony 770, 771, 772
DVD Changers
Manufacturer Code
Sony
Panasonic
765
766
DVR
Manufacturer Code
Sony 901
DirecTV
Samsung
902, 903
902, 903
Blu-ray Disc Player (BD)
Manufacturer Code
Sony 101, 102, 103
5.1ch DVD AV System
Manufacturer Code
Sony (DAV) 601, 602, 603, 604
AV Receivers
Manufacturer Code
Sony 764
26
VCRs
Manufacturer Code
Sony
Sony DV
301, 302, 303
(VHS, 8mm, Beta)
348
Admiral
(M. Ward)
Aiwa*
327
338, 344
Audio Dynamic 314, 337
Broksonic 317, 319
Canon
Citizen
Craig
Curtis Mathes
Daewoo
DBX
Dimensia
Emerson
308, 309
332
302, 332
304, 309, 338
309, 312, 341
314, 336, 337
304
316, 317, 318, 319,
320, 341
Fisher
Funai
330, 335
338
General Electric 304, 309, 329
Go Video 322, 339, 340
Goldstar
Hitachi
Instant Replay
JC Penney
332
304, 305, 306, 338
308, 309
304, 305, 309,314,
330, 336, 337
JVC
Kenwood
LG
LXI (SEARS)
314, 336, 337, 345,
346, 347
314, 332, 336, 337
332
305, 330, 332, 335,
338
Magnavox
Marantz
Marta
308, 309, 310
314, 336, 337
332
Memorex
Minolta
309, 335
304, 305
Mitsubishi/MGA 323, 324, 325, 326
Multitech 321, 325, 338
NEC
Olympic
Optimus
Orion
Panasonic
Pentax
Philco
Philips
314, 336, 337
308, 309
327
317
306, 307, 308, 309
304, 305
308, 309
308, 309, 310
Pioneer
Quasar
308
306, 308, 309
RCA/PROSCAN 304, 305, 308, 309,
310, 311, 312, 313,
329
Realistic 309, 324, 328, 330,
335, 338
Sansui
Samsung
Sanyo
Scott
Sharp
314
313, 321, 322
330, 335
312, 313, 321, 323,
324, 325, 326, 335
327, 328
Manufacturer Code
Signature 2000
(M. Ward)
SV2000
Sylvania
Symphonic
327, 338
338
308, 309, 310, 338
338
Tashiro
Tatung
Teac
Technics
Toshiba
Wards
332
314, 336, 337
314, 336, 337, 338
308, 309
311, 312
327, 328, 331, 332,
335
Yamaha
Zenith
314, 330, 336, 337
331
Cable Boxes
Manufacturer Code
Sony 230
Hamlin/Regal
Jerrold, General
Instrument or
Motorola
Oak
222, 223, 224, 225,
226
201, 202, 203, 204,
205, 206, 207, 208,
218, 222
Panasonic
Pioneer
227, 228, 229
219, 220, 221
211, 214, 215
Scientific Atlanta 209, 210, 211
Tocom 216, 217
Zenith 212, 213
Satellite Receivers
Manufacturer Code
Sony 801
DirecTV
Dish Network
902, 903
810
Echostar 810
General Electric 802
Hitachi
Hughes
805
804
Humax
JVC
LG
Mitsubishi
902, 903
810
902, 903
809
Panasonic
Philips
803
811, 902, 903
RCA/PROSCAN 802, 808, 902, 903
Toshiba 806, 807
Samsung 812, 902, 903
* If an Aiwa VCR does not work even though you enter the code for Aiwa, enter the code for Sony instead.
Using Other Equipment with
Your Remote Control
Make sure that the equipment is programmed on
the remote control (page 25).
Press INPUT repeatedly until you see the video input on the screen for your connected equipment.
Remote control tips are provided below.
~
• Equipment marked with an (*) below may not necessarily be activated by the suggested button if it has been programmed with another FUNCTION button.
• Use the remote control supplied with your connected equipment if a function cannot be operated.
Cable Box
To Do This ...
Press ...
Activate the remote control to operate the cable box
STB (FUNCTION)
Turn on/off
Select a channel
POWER
0-9, ENT
Change channels
Back to previous channel
CH +/–
JUMP
Satellite Receiver
To Do This ...
Press ...
Activate the remote control to operate the satellite receiver
STB (FUNCTION)
Turn on/off POWER
Select a channel 0-9, ENT,
CH +/– Change channels
Back to previous channel
Display channel number
Display SAT Guide
JUMP
DISPLAY
OPTIONS
Display SAT Menu
Move highlight (cursor)
Select item
HOME
V v B b
VCR*
To Do This ...
Press ...
Activate the remote control to operate the VCR
STB (FUNCTION)
Turn on/off
INPUT SELECT
POWER
INPUT
Select a channel
Change channels
Record
Play
0-9, ENT
CH +/– z
H
To Do This ...
Stop
Fast forward
Rewind the tape
Pause
Press ...
x
M m
X (press again to resume normal playback)
DVD Player or DVD Changer
To Do This ...
Press ...
Activate the remote control to operate the DVD
DVD (FUNCTION)
POWER Turn on/off
If you have a DVD changer, to skip disc
F1
Play
Stop
H x
Pause
Step through different tracks of the disc
X (press again to resume normal playback) m to fast reverse or M to fast forward the disc when pressed during playback
Step through different chapters of the disc
> to step forward or . to step backward
Select a track directly
Display the disc menu or top menu
Operate the DVD menu
0-9, ENT
BD/DVD MENU or TOP
MENU
V v B b,
Display the system MENU
Return
HOME
RETURN
Blu-ray Disc Player (BD)
To Do This ...
Press ...
Activate the remote control to operate the Blu-ray Disc Player
BD (FUNCTION)
Turn on/off
Play
Stop
POWER
H x
Pause
Step through different tracks of the disc
Display the POP UP menu (BD)
X (press again to resume normal playback) m to fast reverse or M to fast forward the disc when pressed during playback
BD/DVD MENU
Display the disc menu (DVD)
Display the top menu (BD)
BD/DVD MENU
BD/DVD TOP MENU
Display the top menu (DVD)
Operate the menu
MENU ON/OFF
BD/DVD TOP MENU
V v B b,
HOME
(Continued)
27
To Do This ...
Specify the previous chapter/track
Specify the next chapter/track
Return to the previous display
Press ...
.
>
RETURN
5.1ch DVD AV System (Sony DAV)
To Do This ...
Press ...
Activate the remote control to operate the DVD
DVD (FUNCTION)
POWER Turn on/off
Select other equipment connected to the DAV
Disk skip
F1
Display the disc menu or top menu
F2
BD/DVD MENU or TOP
MENU
Select a track directly
Play
0-9, ENT
H x Stop
Pause
Search the picture forward or backward
Specify the previous chapter/track
Specify the next chapter/track
X
M or m during playback
.
>
Move highlight (cursor)
Select item
V v B b
Master volume VOL +/–, MUTING
DVD/VCR Combo Unit
To Do This ...
Press ...
Activate the remote control to operate the DVD/VCR
DVD (FUNCTION)
Turn on/off
Select the DVD
Select the VCR
POWER
F1
F2
Display the disc menu or top menu
BD/DVD MENU or TOP
MENU
H Play
Stop
Pause
Search the picture forward or backward x
X
M or m during playback
Move highlight (cursor) and select (DVD)
Record (VCR)
V v B b, z
Change channels (VCR)
Adjust tracking (VCR)
Index search
CH +/– or 0-9, ENT
(using tuner)
CH +/–
(during tape playback)
. >
28
To Do This ...
INPUT SELECT
MENU ON/OFF
Press ...
INPUT
HOME
HDD/DVD Combo Unit
To Do This ...
Press ...
Activate the remote control to operate the DVD/HDD
DVD (FUNCTION)
Turn on/off
Select the HDD
Select the DVD
Play
Stop
POWER
F1
F2
H x
X Pause
Search the picture forward or backward
Move highlight (cursor) and select
Record
Record stop
M or m during playback
V v B b, z x
Record pause
Specify the previous chapter/track
Specify the next chapter/track
Replay
Advance
X
.
>
Display the disc menu or top menu
INPUT SELECT
MENU ON/OFF
Search DVD by title or chapter
Return to the previous display
BD/DVD MENU or TOP
MENU
INPUT
HOME
OPTIONS
RETURN
AV Receiver*
To Do This ...
Press ...
Activate the remote control to operate the AV Receiver
STB (FUNCTION)
Turn on/off
Master volume
Select other input connected to AV receiver
POWER
VOL +/–, MUTING
F1
DVR*
To Do This ...
Press ...
Activate the remote control to operate the DVR
DVD (FUNCTION)
Turn on/off
Play
POWER
H
Replay the current program for a set period of time
Advance forward a set period of time when playing back a recorded program
To Do This ...
Specify the previous chapter mark
Specify the next chapter mark
Stop
Pause
Record
Open the Favorites List
Open the Guide
Open Main Menu
Move highlight (cursor)
Select item
Close on-screen display
Page +/-
Open the RECORDINGS List
RETURN
CH+/-
TOP MENU
Press ...
.
> x
X z
FAVORITES
OPTIONS
HOME
V v B b
29
