Kit Packaging. Toshiba 1202kit

Add to My manuals


Kit Packaging. Toshiba 1202kit | Manualzz

Congratulations on your purchase of a Toshiba DVD-RAM drive and Kit. The following information will help you in the simple installation of your new DVD-

RAM drive.


Please unpack your DVD-RAM kit, and assure that you have the following items:

! Toshiba SD-W2002 DVD-RAM Drive

! Blank Media - Single Sided/Type 1 DVD-RAM

! CyberLink PowerDVD

™ Software

! VOB InstantWrite Software CD

! DVD-RAM Installation Instructions (this manual)

! Quick Start Guide

! Mounting screws


! IDE BUS cable

! DVD/CD sound cable

Additional items you may need that are not included in the kit are:

! Phillips Screwdriver

! Mounting hardware (i.e. some computer systems use mounting rails).


The DVD-RAM kit requires the following:

✔ At least 55MB of free hard disk space

✔ At least 32MB of RAM

✔ *Pentium II processor at 266MHz or higher or....

*Celeron 300A processor or higher or....

*K6-2 processor at 300MHz or higher

✔ Display card supporting DirectDraw

✔ 16-bit or better sound card

✔ Microsoft ™ Windows 95 or higher

✔ Amplified stereo speakers

* These requirements are only required if you are using the CyberLink PowerDVD ™ software. The SD-W2002 DVD-RAM will work as a CD-ROM and DVD-RAM when using a lower speed Pentium system.



Related manuals