Connecting to a power source. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D


Add to my manuals
156 Pages

advertisement

Connecting to a power source. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D | Manualzz

30 Getting Started

Connecting to a power source

To use external power or to charge the battery you must attach the AC adaptor. See

“Connecting to a power source” on page 30

.

NOTE Please handle your device carefully to avoid scratching or damaging the surface.

Connecting to a power source

Your device requires power to operate. Use the power cord/cable and AC adaptor to connect the device to a live electrical outlet, or to charge the device’s battery.

Never pull on a power cord/cable to remove a plug from a socket. Always grasp the plug directly. Failure to follow this instruction may damage the cord/cable, and/or result in a fire or electric shock, possibly resulting in serious injury.

Always confirm that the power plug (and extension cable plug if used) has been fully inserted into the socket, to ensure a secure electrical connection. Failure to do so may result in a fire or electric shock, possibly resulting in serious injury.

Be careful if you use a multiple connector. An overload on one socket could cause a fire or electric shock, possibly resulting in serious injury.

Always use the TOSHIBA AC adaptor that was provided with your device, or use AC adaptors specified by

TOSHIBA to avoid any risk of fire or other damage to the device. Use of an incompatible AC adaptor could cause fire or damage to the device possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor.

Getting Started

Connecting to a power source

31

AC adaptor

Power cord/cable

AC adaptor cord

(Sample Illustration) Power cord/cable and AC adaptor

To connect AC power to the device:

1 Connect the power cord/cable to the AC adaptor.

(Sample Illustration) Connecting the power cord/cable to the

AC adaptor

Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.

Wash hands after handling .

_

+

2 Plug the AC adaptor cord into the DC-IN on the side of the device.

(Sample Illustration) Connecting the AC adaptor cord to the device

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Table of contents