Exploring audio features. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D


Add to my manuals
156 Pages

advertisement

Exploring audio features. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D | Manualzz

86 Exploring Your Device’s Features

Exploring audio features

Connecting your device to a network

You can connect your device to a network to increase its capabilities and functionality.

Accessing a network

For specific information about connecting to the network, consult your network administrator. Many hotels, airports, and offices offer Wi-Fi ® access.

Exploring audio features

You can use your device to record sounds using the device’s internal microphones (available on certain models) or an optional external microphone. You can listen to sound files or audio CDs using the built-in speakers, headphones, or external speakers.

Recording sounds

You may record sounds using the device’s internal microphones or by connecting an optional external microphone.

Using a microphone

NOTE To locate your headphone/microphone jack, please refer to your Quick Start document.

1 If you want to use an external microphone, connect it to the device.

2 From the Start screen begin typing Sound Recorder and click or touch your selection. If you are in the

Desktop, move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the

Windows ® charms appear click or touch the Search ( ) charm and, in the Search field, type Sound Recorder .

Start Recording/Stop Recording button

(Sample Image) Sound Recorder screen

3 Click or touch the Start Recording button.

4 Speak normally into the microphone.

Exploring Your Device’s Features

Exploring audio features

87

5 When you have finished recording, click or touch the

Stop Recording button.

The Save As dialog box appears.

6 To save the file, type a file name, and then click or touch

Save .

Using external speakers or headphones

NOTE To locate your headphone/microphone jack, please refer to your Quick Start document.

Your device is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.

Before putting on headphones to listen, turn the volume down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing.

TECHNICAL NOTE: When using amplified speakers, use speakers that require an external power source. Other types of speakers will be inadequate to produce sound from the device.

To play back sound files through external speakers or headphones:

1 Locate the headphone/microphone jack on the device.

2 Using any necessary adapters, plug the cable from the headphones or external speakers into the headphone/microphone jack.

The headphone/microphone jack requires a 16-ohm stereo mini connector.

To adjust the volume:

For external speakers, use the volume controls on each speaker.

❖ For headphones, use the device’s volume control.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Table of contents