System Settings. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D

Add to my manuals
156 Pages

advertisement

System Settings. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D | Manualzz

98 Utilities

System Settings

System Settings

System Settings is the TOSHIBA configuration management tool available through the Windows ® operating system. To access it:

1 To access System Settings from the Start screen begin typing System Settings .

2 Click or touch System Settings .

The System Settings screen appears.

(Sample Image) System Settings screen – General tab options

The System Settings screen may have the following tabs:

General —Allows you to view the current BIOS version or change certain settings back to their default values

Display —Allows you to change various default settings for the built-in display

NOTE When the device restarts, it remembers the last configuration. If data does not appear on the display you are using after starting in Sleep mode, press the ( ) + P keys to toggle the display. For more information, see

“Directing the display output when your device is attached to the keyboard dock” on page 54 .

CPU —Configure the power saving modes associated with the processor.

Utilities

System Settings

99

Boot Options —Allows you to change the sequence in which your device searches the drives for the operating system

Boot Priority —Allows you to configure boot priority settings.

Panel open/Power on —Allows you to turn on the device when opening the display panel while the device is turned off.

Power On By AC —Enable the Power on by AC function. When you plug in the AC connecter while your device is turned off, the system will boot up automatically.

USB —Allows you to enable or disable USB Legacy

Emulation and internal USB 3.0 controller

SATA —Allows you to set conditions for SATA

LAN —Allows you to set networking functions

Undock and Sleep —Enables the Undock and Sleep function. When the device lid is closed, device will enter sleep mode after undock operation.

Advanced Options —Allows you to set conditions for various devices and functions

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents