Problems when you turn on the device. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D


Add to my manuals
156 Pages

advertisement

Problems when you turn on the device. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D | Manualzz

106 If Something Goes Wrong

Problems when you turn on the device

If you are working in a program that suddenly freezes, chances are the program has stopped responding. You can exit the program without shutting down the operating system or closing other programs.

To close a program that has stopped responding:

1 Press Ctrl , Alt , and Del simultaneously (once), and then click or touch Task Manager .

The Task Manager window appears.

2 Select the program or application you want to close, and then click or touch End Task in the lower right corner.

Closing the failed program should allow you to continue working. If it does not, continue with the next step.

3 Close the remaining programs one by one by selecting the program name, then select End Task .

Closing all programs should allow you to continue working. If it does not, power off your device, and then restart it.

Your device is not responding

If you continue to have trouble after trying the steps above, and the device will not shut down, use the Reset button, located on the side of the device between the Power and

Rotation buttons, to shut down the system.

To use the Reset button:

The button is actually a hole that can be used to access the button located inside the unit. Gently insert a slender object such as a straightened paper clip into the Reset button to force shut down when the device is non-responsive. Then press the power button to restart the device. Never use a pencil to press the Reset button. Pencil lead can break off inside the device and damage it.

To locate your reset button, please refer to your Quick Start document.

Problems when you turn on the device

These problems may occur when you turn on the power.

The device will not start.

Make sure you attached the AC adaptor and power cord/cable properly.

Press and hold the power button for at least 10 seconds.

If Something Goes Wrong

Problems when you turn on the device

107

If you are using the AC adaptor, check that the wall outlet is working by plugging in another device, such as a lamp.

Verify that the device is on by looking at the Power button. If the button is glowing, the device is on. If the button is not lit, try turning the device off and then on again.

If you are using an AC adaptor, verify that the device is receiving power from the external power source by checking the AC power light located on the left side of the device. If the indicator is glowing, the device is connected to a live external power source.

The device displays the WARNING RESUME

FAILURE/ Windows Error Recovery – Windows did not shut down successfully message.

To continue, select Start Windows normally . This can happen if the device was put into Sleep mode and the battery has discharged. If you performed a shutdown before this message was displayed, a program or driver may have prevented Windows ® from shutting down.

Data stored in the device’s memory has been lost. Data stored in the device’s internal storage drive may not be affected.

Always save your data even when you are using Sleep mode. If your battery fully discharges, information that has not been saved will be lost. Your device can be configured to

warn you when the battery is running low see “What to do when the main battery runs low” on page 73

.

If you are running on battery power, it is recommended that you do not leave the device in Sleep mode for long periods of time.

To charge the battery, leave the device plugged into a live wall outlet for several hours. For more information see

“Charging the main battery” on page 69

.

The AC power light is blinking.

If the AC power light is blinking, try the following steps:

1 Connect the AC adaptor to a different power outlet, preferably in a different room. If the device starts normally, there may be a problem with the AC outlet itself, or the voltage level available from it.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Table of contents