Keyboard problems. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D

Add to my manuals
156 Pages


Keyboard problems. Toshiba Z10t, PT132U00500S, PT132U00600S, Z10t-A1111, Z10t-A1110, PT132U-00500S, Z15t-A1210, PT131U00202D | Manualzz

If Something Goes Wrong

Keyboard problems


Keyboard problems

You have connected an external keyboard and the operating system displays one or more keyboard error messages.

You may need to update your keyboard driver. Refer to the documentation that came with the keyboard or to the keyboard manufacturer's Web site.

The keyboard you connected may be defective or incompatible with the device. Try using a different make of keyboard.

Touch pad problems

You have used the recovery media to image your device and the touch pad on the keyboard dock is no longer working.

The touch pad driver is pre-installed on your device. If this driver is removed, the touch pad and touch pad buttons will not work. You will need to reinstall the touch pad driver located in the Application Installer.

For more information, see

“TOSHIBA Application Installer” on page 103


Display problems

Here are some typical display problems and their solutions:

The screen is blank.

Display Auto Off may have gone into effect. Press any key to activate the screen.

If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, press F4 .

If this does not correct the problem, press F4 again to return the display priority to its previous setting.

HINT: Pressing the F4 key several times will advance you through the display options.

If you are using an external monitor:

❖ Check that the monitor is turned on.

❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet.

116 If Something Goes Wrong

Display problems

❖ Check that the cable connecting the external monitor to the device is firmly attached.

❖ Try adjusting the contrast and brightness controls on the external monitor.

❖ Press F4 to make sure the display priority is not set for the built-in screen.

The screen does not look correct.

Choose a theme for your desktop background, under

Change the visuals and sounds on your device , in the

Themes panel. You can also change the setting for individual components separately by selecting an item from just below the Themes panel ( Desktop Background ,

Color , Sounds , and Screen Saver ).

For more information, see the Windows ® online Help.

A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware.

Reduce the size of the color palette to one that is supported by the device’s internal display.

To change the display properties:

1 Right-click or touch & hold in a blank area of the

Windows ® desktop.

2 Click or touch Personalize , and then Display .

3 Use the menu on the right hand side of the page to:

❖ Adjust resolution

Adjust brightness

❖ Calibrate color

Change display settings

Project to a second screen

❖ Adjust ClearType text

4 Click or touch OK .

The display mode is set to Simultaneous and the external display device does not work.

Make sure the external monitor is capable of displaying at resolutions of 1280 x 800 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals


Table of contents