Television Playback: Connecting Your Camera to a Video Device. Nikon 25048, Coolpix 775

Add to my manuals
182 Pages

advertisement

Television Playback: Connecting Your Camera to a Video Device. Nikon 25048, Coolpix 775 | Manualzz

Television Playback: Connecting Your Camera to a Video Device

Using the EG-775 video cable provided with your camer a, you can connect the

COOLPIX775 to a television or VCR. The video device will show the same picture as is displayed in the camera monitor.

1 Connect the video cable to the camera

Insert the black plug on the EG-775 into the camera’s interface connector.

2 Connect the video cable to the video device

Connect the yellow plug to the video-in jack on the television or VCR.

3 Tune the television to the video channel

4 Turn the camera on

The television will mirror the image in the camera monitor.

Use an AC Adapter

To prevent the display in the television from turning off whenever the camera enters sleep mode, connect the camera to an EH-2 1 AC adapter/battery charger (available separately).

Note, however, that camera settings and photo info will not be displayed on the television screen when the camera monitor is off.

Choosing a Video Mode ( 119)

The Video Mode item in the SETUP menu offers a choice of NTSC and PAL standards for video output. Be sure that the standard selected matches that of any video device to which you connect the camera.

PAL Video Mode ( 119)

At a setting of PAL, the monitor will turn off when a video cable is connected. In movie mode, however, the monitor will turn on and output to the video de vice will be suspended.

139

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents