Call Log (Caller ID - Call Waiting)
Caller ID - Call Waiting ID
Your ip 5850 is capable of displaying the number of the calling party before you answer the phone ( Caller ID ). If the number is contained in the phonebook, the name of the caller will also be displayed. It is also capable of displaying Caller ID information in conjunction with a Call Waiting alert signal ( Call Waiting Caller ID ).
With Call Waiting Caller ID, the Caller ID data is displayed so you can decide whether to answer the incoming call, or continue with your current conversation.
Your ip 5850 can hold up to 50 CID entries.
NOTES ABOUT CALLER ID & CALL WAITING CALLER ID
These are subscription services, provided by most regional telephone service providers. You must subscribe to these services to get the benefits of these features. If you do not subscribe to Caller ID services, you can still use your ip 5850 and the other features it offers.
Due to regional incompatibilities, Caller ID information may not be available for every call you receive. In addition, the calling party may intentionally block their name and/or phone number from being sent.
• As new Caller ID/Call Waiting ID records are received, your Handset displays will alert you to the new Caller ID records, for example:
• After you review all new Caller ID records, the NEW call indication will be turned off and the screen will show:
• If the call log is full, the oldest entry is deleted to make room for the new call. If the call log is empty when you try to enter to
Call Log review, the following message is displayed:
Reviewing Caller ID
You can review the Caller ID record via the menu as described below, or by pressing the
key in idle (quick access key) whereby the
Handset jumps directly to the Caller ID review.
• In idle mode, press SEL to enter the menu.
• Press key to scroll to CALL LOG option.
18
Call Log (Caller ID - Call Waiting)
• Press SEL again. Use or to scroll through the Call Log entries. When the beginning or the end of the Call Log is reached, a double beep will sound.
Storing a Caller ID
• Follow the steps in Reviewing Caller ID to scroll to the record to be stored.
• To view alternate dialing sequences, press the # key repeatedly. The screen will cycle through the various dialing options (1 + area code + number, area code + number, 1 + number, number only.) Press SEL to store the displayed number.
• If the Caller ID contains both name and number, the Caller ID will be stored after pressing SEL.
• If the caller ID does not contain a name, you will be prompted to EDIT NAME and the screen will show:
• If the caller ID does not contain a number, you will be prompted to EDIT NUMBER , and the screen will show:
• You will hear a confirmation tone then the screen will display:
• If both name and number are missing, for example as in a private listing, the request will be rejected with the message:
• If the phone number already exists in the phonebook, the entry will not be stored, and the screen will show:
• If the phonebook is full, the screen will show:
Dialing from Caller ID
• Follow the steps in Reviewing Caller ID to scroll to the entry to be dialed.
19
Call Log (Caller ID - Call Waiting)
• To change how the number will be dialed,
(1 + area code + number, area code + number, 1 + number, number only.) press # repeatedly. The screen will cycle through the dialing options. Press ON or SPEAKER key to dial the number.
Deleting Caller ID
• Follow the steps in Reviewing Caller ID to scroll to the record to be deleted.
• Press DELETE key to delete the desired record. A confirmation tone will sound and the previous Caller ID record will be displayed on the screen.
• To delete all the Caller ID records, press and hold the DELETE key. The screen will ask you DELETE ALL CALLS?
Press SEL for confirmation. Or, press OFF to return to the
CID record previously displayed.
20
