Memorizing the Channels. Akai PT5598HD

Add to My manuals
69 Pages

advertisement

Memorizing the Channels. Akai PT5598HD | Manualzz

30

O P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press the Menu button.

Press the CH button to select “Channel”, then press the VOL + button.

Antenna

ANT/CATV

Auto Program

Fav. Channel

Fine Tune

Add/Erase

Labeling

Channel

: A

: ANT

: 00

: - - - -

2

Press the CH button to select “ANT/CATV”, then

Press the VOL + or VOL - button to cycle through these choices:

ANT (antenna), STD, HRC or IRC.

Antenna

ANT/CATV

Auto Program

Fav. Channel

Fine Tune

Add/Erase

Labeling

Channel

: A

: ANT

: 00

: - - - -

Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed to “Storing Channels in Memory”

(next page).

advertisement

Related manuals

Download PDF

advertisement

Table of contents