CONNECTIONS. Panasonic Omnivalsion VHS PV-7452

Below you will find brief information for VCR Omnivalsion VHS PV-7452. The Omnivalsion VHS PV-7452 VCR has many features that allow you to record and playback your favorite shows. This VCR comes equipped with a built-in head cleaner to help ensure a clear picture. You can set the VCR to record a one time, daily, or weekly program while you are away or otherwise occupied. You can also use the VCR to copy tapes.
PDF Download
Document
 ETE че що ст мн сч мно отно смо жк мно мно EE
Thank you for choosing
b
Omnlvigion VHS
виоцоээиио:)
6d ~ 9d
Sid - Old
O)
Е:
к.
ls
ML
—
pr
+
o
a
uonesadQ oiseg
6id ~9id
Video Cassette Recorder
0td ~ 0&cent;d
Сы
Operating
Instructions
Please read these instructions carefully before attempting to
connect, op&eacute;ral&eacute; Or adjust this product Save this manual
og uey nos a10W
Spanish Quick Use Guide в included. (Guia para r&aacute;pida
consulta en espa&ntilde;ol est&aacute; includo
Quick Use Guide is on the back cover.
Q
- Ww
o =
= |
x
E
ах
e
о &copy;
—
о
.—— ——— —L———L——— ETE TEE EA
VOTSII20 (A)
Things You Should Know
Congratulations / Date of Purchase N
on your purchase of one of the most sophisticated and Dealer Purchased From
reliable products on the market today. Used properly, Dealer Address
it will bring you and your family years of enjoyment. Dealer Phone No.
Please fill in the information at right. The serial number
is on the tag located on the back of your VCR. Model No. PV-7452
\ Serial No. -
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
This video recorder, equipped with the HQ (High Quality) System, is compatible with existing VHS equipment.
Only use those tapes with the mark. Itis recommended that only cassette tapes that have been tested
and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
| FCC Warning: Any unauthorized changes or modifications to this equipment would void the user's authority to operate. |
( RULOS 4 This symbol warns the user that uninsulated voltage within the unit may
SK OF ELECTRIC BHOCK have sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any kind of contact with any inside part of this unit.
NO USER SERVICEABLE PARTS INSIDE operation and maintenance of this unit has been included. Therefore, it
REFER SERVICING TO QUALFIED BEAYICE PERSONNEL
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, . . . ‘
60 HOT REMOVE COVER (OR BACK) y This symbol! alerts the user that important literature concerning the
e
\_ should be read carefully in order to avoid any problems. J)
Table of Contents
Things You Should Know ......................-..e=eeererescesereenar ercer enn ana nae reo enana eaoreoenooee enero. 2
Important Safeguards and Precautions ..........................eere.ereerererecer e Re II RR III IIED 3
Unpacking Your VCR - Product Features.....................eeenieesiiiere nene erre Deer Teereorecenerenee 4
VCR and Cassette Information (Record Tab, Tape Speeds, Head Cleaning, D.S.T., Specifications) ..... 5
Conncctions
Basic Connection (Antenna and VCR, VCR and TV) .........e......eeerererereiccronerer cocer o NR ereeeee 6, 7
Additional Connections (CATV, AUdiO/Vid@O)…...…....……rericcrencrennencecsenrenaaanrerranre nas anesnaannaa naar 8, 9
Getting Started
Location of Controls (Remote Control, VCR) ….……......sescessenssreercecserereneesseanr ane naase ras nanas 10, 11
One Time VCR Setup (On-Screen Language, Channel Memory, Auto Clock Set) 12, 13, 14
On-Screen Displays (OSD) (Function, Channel, Menu, VCR Status &amp; Clock, Warning) ..................... 15
Basic Operation
Playback a Tape (Main Operation, Special Effects, Quality Picture Features) ................................... 16
Record On a Tape (Main Operation, One Touch Record, Channel Selection) ee. 17
Timer Recording (Main Operation, Cancel, Clear or Replace Program Contents) ......................... 18, 19
More You Can Do
Tape Operation (Repeat Play, One Minute Skip, Zero Search, Auto Functions, Index Search) ........ 20, 21
MTS Broadcast/ VHS Hi-Fi Stereo System (Stereo/SAP/Mono Broadcast, Select Audio Mode) ....... 22, 23
VCR Plus+ Setup (Cable Box Setup, VCR Plus+ Channel Setup) .....................e..m==ecreercerneceioeo 24, 25
VCR Plus+ Programming (Main Operation, Make Correction) ......................e.....1esrirrierm 26
Copying Your Tapes (Dubbing) (Connection, Main Operation, Monitoring, Select Input Mode) .......... 27
Multi-Brand Contro! Feature .......................ereecerci eee eDreams 28, 29
Other Information
Before Requesting Service (Self-check items)...................e.cemericiiiecer ene ene ere 31
Service Center List ........... EN 32
Warranty EN 33
Spanish Quick Use Guid@ ….................………rscercresenmrensensameconensencannaanereranaaa enr aasaneenna sance 34, 35
Quick Use Guide ...................e..ererermoser care ener ee ea eee eee eee re reeere eones Back Cover
Го
A Important Safeguards and Precautions
FOR YOUR SAFETY, READ AND RETAIN ALL
SAFETY AND OPERATING INSTRUCTIONS.
HEED ALL WARNINGS IN THE MANUAL AND
ON THE UNIT
| INSTALLATION |
1 POWER SOURCE CAUTION
Operate only from a power source indicated on the
unit or in this manual.
If necessary, have your Electric Utility Service Company
or Video Products Deater verify the power source in your
home.
2 POLARIZED OR GROUNDING PLUG
As a safety feature, this Video product comes with either
a polarized power cord plug (one blade is wider than the
other), or a three-wire grounding type plug.
POLARIZED PLUG CAUTION;
This plug will only fit into an outlet one way. If you cannot
fully insert the plug, try reversing it. If it still will not fit, have
an electrician install the proper wall outlet. Do not defeat the
safety feature by tampering with the plug.
GROUNDING PLUG CAUTION:
This plug will onty fit into a three-hole grounding outlet. If
necessary, have an electrician install the proper outlet. Do
not defeat the safety feature by tampering with the plug.
3 POWER CORD
Make sure power cords are routed so that they are not
likely to have anything rest on them, roll over them, or be
in the way of walking traffic.
If an extension cord is used, make sure it also has either
a polarized or grounded plug and that the cords can be
securely connected.
Frayed cords, aamaged plugs, and damaged or cracked
wire insulation are hazardous and should be replaced by
a qualified service technician.
Overloaded outlets and extension cords are fire hazards
and should be avoided.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated during operation. If they are blocked, heat
build-up inside the unit can cause failures that may result
in &agrave; fire hazard or hat damage to cassettes.
For protection, follow these rules:
a. Never cover ventilation slots or the unit while in use,
or operate the unit when placed on a bed, sofa, rug, or
other soft surface.
b. Avoid built-in installation, such as a book case or rack,
unless proper ventilation is provided.
AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do not place the unit over or near any kind of heater or
regulator, in direct sunlight, inside a closed vehicle, etc..
Do not move the unit suddenly between areas of
extreme temperature variation. If the unit is suddenly
moved from a cold place to a warm place, moisture
may condense in the unit and on the tape.
6 TO AVOID PERSONAL INJURY
&raquo; Do not place unsecured equipment on a sloping
surface.
+ Support for the unit should be firm,
level, and adequately strong.
* &Aacute;n appliance and cart combination
should be moved with care.
Quick stops, excessive force,
and uneven surtaces may cause
the appliance and cart combination
to overturn.
+ Carefully follow all operating instructions and use
the manufacturer's recommended accessories
when operating this unit or connecting it to any
other equipment.
OUTDOOR ANTENNA INSTALLATION |
1 — ANTENNA AND CABLE CONNECTION
If an outside antenna or cable
system is connected to the
equipment, be sure the antenna
or cable system is grounded so
as to provide some protection
against built up static charges
and voltage surges. Section
810 of the National Electrical
Code, ANSI/NFPA 70 (in Canada,
part 1 of the Canadian Electrical
Code) provides information with
respect to proper grounding of the
mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes
and requirements for the grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE
POWER LINES OR CIRCUITS
An cutside antenna system should be located well away from power lines,
electric light or power circuits and where it will never come into contact with
these power sources if it should happen to fall. When installing an outside
antenna, extreme care should be taken to avoid touching power lines,
circuits or other power sources as this could be fatal. Because of the
hazards involved, antenna installation should be left to a professional.
| USING THE VIDEO UNIT |
If the unit has been in storage or moved to a new location, refer first
to the INSTALLATION section of these safeguards.
1 KEEP THIS VIDEO UNIT AWAY FROM WATER OR
MOISTURE OF ANY KIND.
2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT, unplug the unit and have it inspected by a qualified
service technician before use.
3 DURING AN ELECTRICAL STORM
During a lightning storm, whether indoors or outdoors, or before leaving the
unit unused for extended periods of time, disconnect all equipment from the
power source as well as the antenna and cable system.
4 WHEN THE UNIT IS PLUGGED IN
- Never expose the unit to rain or water, DO NOT OPERATE if liquid has
been spilled into the unit. Immediately unplug the unit, and have it
inspected by a service technician. Fire and shock hazards can result from
electrical shorts caused by liquid contact inside.
* Never drop or push any object through openings in the unit. Some interna!
parts carry hazardous voltages and contact can cause electric shock or fire
hazard.
* Avoid placing the unit directly above or below your TV set as this may
cause electrical interference. Keep all magnets away from electronic
equipment.
5 USING ACCESSORIES
Use only accessories recommended by the manufacturer to avoid risk of fire,
shock, or other hazards.
6 CLEANING THE UNIT
Unplug the unit. Then, use a clean, dry, chemically untreated cloth to gently
remove dust or debris. DO NOT USE cleaning fluids, aerosols, or forced air
that could over-spray, or seep into the unit and cause electrical shock.
Any substance such as wax, adhesive tape, etc. may mar the cabinet surface.
Exposure to greasy, humid, or dusty areas may adversely affect internal parts.
| SERVICE
1 DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating instructions, this Video
product does not operate properly, do not attempt to open or remove covers,
or make any adjustments not described in the manual. Unplug the unit and
contact a qualified service technician.
2 IF REPLACEMENT PARTS ARE REQUIRED
Make sure the service technician uses only parts specified by the manufacturer,
or those having the same safety characteristics as the original parts. The use of
unauthorized substitutes may result in fire, electric shock, or other hazards.
3 HAVE THE SERVICE TECHNICIAN PERFORM
A SAFETY CHECK
After any service or repairs to the unit, request the service technician to
conduct a thorough safety check as described in the manufacture’s service
literature to insure that the video unit is in safe operating condition.
3
Unpacking Your VCR +* Product Features
Unpacking Your VCR Loading the Batteries
The accessories below are provided to help
you use or set up your VCR.
, the latch with your
Accessories thumb nail and lift off
the lid.
1 Push in and up on
Remote Control
5655 vsQs1480
=
as indicated inside the
2 “AA” Battery Compartment.
Batteries
Fit the lid’s hinge
3 piece into the indent
on the case, and snap
RF Coaxial the lid into place.
Cable
VJAS0183
Battery replacement caution
* Do not mix old and new batteries.
To order accessories, * Do not mix alkaline with manganese batteries.
call toll free 1-800-332-5368.
2 Install two batteries
Product Features
All Channel Auto Set/ 181-CH TV/CATV Tuner .................e.eermerescerccioree rene ee. 12, 13
Auto Clock Set ................e...eerccsnooreovecacecervorerereraecenaaetooneenereae ear t enero rerenner tenen reeceneence. 12, 13
Auto Daylight Saving Time ...................r=..esvercerrenvveccarreonarranceovoococeraceneenenvearevernecen ere sere sesnannns 5
Auto Features for a Quality Picture ...................-..ereeeeseevececrcerre er nen ere an Nero cer enema. 16
Auto Operation Functions (Auto Playback, Rewind, Tape Eject, Power off) .................e.....e.eenmvernernes 20
Auto Repeat Function ................-e.......-...eereseirericerarerete ren enena acre nroneneenanenancerreneenanene aaron. 20
Digital Auto Picture ........................+.esessrersereresvene rre earn er ee rene ren rerereucienennorconercenere nece. 16
Easy-to-Read English/Spanish/French On-Screen Displays ......................... 12, 13, 14, 18, 19
Front-mounted A/V In Terminals ................-..e=esessvercacerneconienererenerneno ceo enero earece eres nenenee. 27
[=F To JO [=F TTT TD 5
MTS Broadcast System (Multi-channel Television Sound-Stereo, SAP, Mono) ...................rececsrncconns 22
Multi Brand TV/Cable Box Remote Control ......................eeseesecieereenanie rene enana ennnes 28, 29
One Minute Skip ................eeeremmecerecrorcencereeo nero reeneeeanenerrecreeocerereaerocaronenerrrratteeaonocerareerneernces 20
One Month, 8 Program Timer Recording ......................ee.e....=eemeeroncener ener. 18, 19
One Touch Recording (OTR) cocoons reese revere terror ne nenanacer enenencene oca reee. 17
Program Director Remote Control ......................rreseersereecarerere recien ee reereneeenecenanreeee. 18, 19
Special Effects Playback ................._.ee...eeeo-rrevecrocorrerir coronar Rene reneoceneceerrererre nn eaerere cone 16
Special VCR Features (VCR Lock, Warning Beeper ).............-......eeemeniie e Rene reee eee. 30
Timer Recording Using VCR Buttons ...................ree.esveserrerererenarieceen nene nene 19
VCR Plus+ Recording ......................._ e. e..erercec enero cenar enero eee ereeee 24, 25, 26
VHS Hi-Fi Stereo System .........................e.reercmceccerciee eee een recen ereaceacenceonecaceceeee career reee. 23
VHS Index Search System (Direct Access Search, Index Scan Search) .................eeceneerenicicer orton. 21
Zero Search .......................e.eeerecconcorecercecerneceerceneeenea nee ner eee reececereacenereccereccanacooeacerecerene. 20
4
| Erase Protection (Record Tab) )
Cassettes have a record tab to ensure that
recordings are not accidentally erased.
To prevent accidental
erasure, break off th
with a screwdriver.
To record again, cover the
hole with cellophane tape.
| Maximum Record/Playback Time |
Only use tapes with the VHS] S/mark in this unit.
Tape Speed Type of Video Cassette
Setting T60 T120 T160
Standard Play) | 1 Hour 2 Hours 40 pours
(Long Play) 2 Hours 4 Hours 20 Minutes
(Super Long Play) 3 Hours 6 Hours 8 Hours
| Built-in Head Cleaner |
A clean video head helps produce a clear picture.
So, we have equipped your VCR with a built-in, non
chemical head cleaning system that helps prevent
clogging of the video heads. Cleaning is performed
each time you load or unload a video cassette.
Note: This feature is preventative only. If your video
heads are seriously clogged, consider the use of
a chemical nonabrasive head cleaning kit or take
your VCR to a Service Center.
| Head Cleaning |
Your VCR will not normally require head cleaning,
however the heads may become clogged when playing
an old or damaged tape.
Head Clog Sensor
If head cleaning becomes
necessary, the VCR will
display the screen at right
while playing back a
recorded signal.
To exit this screen, push PLAY
on the remote control or VCR.
- Use “dry” type head cleaning cassette&quot; only.
* Be sure to follow the cleaning tape instructions
carefully. Excessive use of a cleaning cassette can
shorten head life.
+ If using a head cleaning cassette does not solve the
problem, contact your nearest Factory Service Center
or authorized Service Center.
* Cleaning cassette part No. NV-TCL30PT is
recommended.
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END:PLAY KEY
VCR and Cassette Information
| Reset all VCR Memory Functions
Use when moving the VCR to a new location, or if a mistake
was made in the One Time VCR Setup section.
* Make sure a tape is not inserted in the VCR.
1) Turn VCR Power on.
2) Push and hold both PLAY and CH A on the VCR for more
than 5 seconds.
* The power will shut off.
3) Perform the One Time VCR Setup section on page 12.
| D.S.T. (Daylight Saving Time) |
Spring (First Sunday in April)
When the VCR is set to DST:ON, it automatically adds
one hour and adjusts the clock.
1:00 a.m. 2:00 a.m.
| NORMAL TIME |
DAYLIGHT
SAVING TIME
o e &gt;
3:00 a.m. 4:00 a.m.
Autumn (Last Sunday in October)
When the VCR is set to DST:ON, it automatically turns back
one hour and adjusts the clock.
DAYLIGHT 1:00 a.m. 2:00 a.m.
SAVING TIME - :
| NORMAL TIME | ё . &gt;
1:00 a.m. 2:00 a.m.
| Specifications
120V AC, 60 Hz
Approx. 23 watts (Power on)
Approx. 7 watts (Power off}
Video Signal: EIA Standard NTSC color
Video Recording System: 4 rotary heads helical
scanning system
Power Source:
Power Consumption:
Audio Track: 1 track (Normal)
2 channel (Hi-Fi Audio Sound)
Tuner:
Broadcast Channels: VHF 2~13, UHF 14~69
CATV Channels: Midband A through | (14~22)
Superband J through W (23-36)
Hyperband AA~EEE (37~64)
Lowband A-5~A-1 (95~99)
Special CATV channel 5A (01)
Ultraband 65-94, 100-125
Operating Temperature: 41&deg;F~104&deg;F (5&deg;C~40&deg;C)
Operating Humidity: 10%-75%
Weight: 7.5 165. (3.4 kg)
Dimensions: 14-15/16&quot; (W) x 3-2/13&quot; (H) x
11-13/16&quot; (D)
380 (W) x 93 (H) x 300 (D) mm
Note: Designs and specifications are subject to change
without notice.
Basic Connection
ANTENNA
INDOOR — _ OUTDOOR —— &gt; Cable TV
ANTENNA ANTENNA wd D
or
N /
Disconnect the antenna or cable
from your TV and connect it to the
VCR (IN FROM ANT.)
VCR
Antenna Cable
Set the Output Channel J
of your VCR
to channel 3 or 4 (whichever is not being
transmitted on by a Local TV broadcast).
RF Coaxial Cable
(VCR-TV Connection Cable) (supplied)
Connect the VCR to your TV
with the RF Coaxial Cable (OUT TO TV).
WARNING
| When using “Nut type” RF coaxial cables, tighten with fingers only. Overtightening may damage terminals.
6
Between Antenna and VCR
Case 1: Twin Lead Cable Only
To VCR Terminal
= a
=&copy;
(Flat) Twin Lead 300 300-75 ohm Transformer
Ohm Cable (not supplied)
Case 2: Twin Lead &amp; Coaxial Cables
UHF/VHF
Band Mixer
(not supplied)
(Round) 75 Ohm
coaxial Cable To VCR Terminal
Case 3: Two Twin Lead Cables
UHF/VHF
Band Mixer
{not supplied)
300-75 ohm Transformer
(not supplied)
To VCR Terminal
* If your TV has both post and plug-type VHF
terminals, the post connection is recommended
to minimize signal loss.
Between VCR and TV
Case 1: Screw &amp; Plug Type Terminal
UHFA/HF Band Separator
{not supplied) VHF
UHF
RF Coaxial Cable
Case 2: Screw Type Terminal
75-300 ohm Transformer
(not supplied)
VHF
or
UHF
Case 3: Double Screw Type Terminal
UHF/VHF Band Separator
(not supplied) VHF
UHF
Case 4: Complex TV Terminal
TERMINALS ON BACK OF TV SET
Split out
ANT
ANT2
&laquo; Connect to one of the ANT terminals and select
the same antenna number on the TV.
=
о
3
=
D
0
=.
O
3
7
Additional Connections
CATV(Cable) Connections All connections on this page are made with 75 Ohm coaxial cables.
Without a Converter/Descrambler Box
VCR IN FROM ANT. TV
You can:
1) Use your VCR Remote Control to select channels.
2) Program one or more unscrambled channels for
unattended recording.
You cannot:
record or view scrambled channels ET
with this connection. VHF/UHF
With a (CABLE to VCR) Converter/Descrambler Box
VCR QUT TO TV TV
You can: Cable TV Converter
Box
IN FROM ANT:
1) Record and view any channel including
scrambled channels; channel selection
must be made at the Cable TV Converter
IN FROM
Box. | CABLE
2) Program one channel for unattended
recording.
VHF/UHF
You cannot:
select channels from VCR or TV.
With a (VCR to TV) Converter/Descrambler Box
IN FROM ANT. TV
You can: VCR
1) Use your VCR Remote Control to select channels.
2) Program unattended recordings of more than
one unscrambled channel. IN FROM &lt;&lt;
CABLE
ABLE A OUT TO
You cannot; с
record scrambled channels with this connection.
Cable TV
Converter IN
Box OUT
With Two Converter/Descrambler Boxes
If you want to record and view rer Box 1
a combination of scrambled IN FROM se
and unscrambled channels, CABLE OS Г IN FROM ANT. VCR
you will need additional 2-Way
equipment. IN Splitter OUT 1 A (
This connection requires NN a
two converter Oxes, Nay &gt; Converter
an A/B switch, and OUT 2 Box 2
a 2-way splitter Se SZ
as shown here. aa ST
&gt; la | =/ 750hm 7 OUTTOTV
Coaxial Cable
OUT A/B Switch
With a DSS Receiver CABLE Cr
Antenna IN FROM
Satellite Dish OUT TO TV
You can:
1) Record and view any channel including
scrambled channels; channel selection
must be made at the DSS Receiver.
0
O
3
3
n
0
=
О
3
7
2) Program one channel for unattended
recording.
NOTE: The DSS receiver must be turned
off to view programs from a cable
box or antenna. See the DSS
manual for details.
VHF/UHF
“DSS&reg; is a registered trademark of DIRECTV, INC., a unit of GM Hughed Electronics.
. , . a If your TV has AUDIO IN and VIDEO IN terminals, you can connect
Audio/Video Connections your VCR to them to receive a higher quality picture and sound. if
your TV is not stereo, you can connect a stereo amplifier to the VCR
to enjoy stereo sound.
Audio/Video Connections
TV
IN FROM ANT
AUDIO IN == OUT TO TV
1 Connect the VIDEO OUT terminal on the VCR to the VIDEO IN terminal of your TV.
2 Connect the “L” and “R” AUDIO OUT terminals on the VCR to the “L” and “R” AUDIO IN terminals of your TV.
3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”
NOTE: To use your TV as a VCR monitor, set the VIDEO/TV selector on the TV (Monitor/Receiver) to “VIDEO.”
Use the L Audio In jack for proper sound reproduction when connecting to a monaural TV.
Stereo Amplifier Connections
When you connect your VCR to a Stereo Amplifier
Stereo Component System, you
can view the picture from the VCR
while enjoying stereo from your &lt;&gt;
audio system.
Connect the “L” and “R” AUDIO
QUT terminals on the VCR to the
“L” and “R™ AUDIO IN terminalis of
your stereo.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC in USA (and to the
Canadian Electrical Code in Canada) that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
9
Remote Control Buttons
VCR TV
See pages 28, 29. See pages 28, 29.
POWER CA TV CATV
See pages 12, 18, 19, 26. See pages 28, 29,
VCR/TV до y — INPUT
See pages 12, 17. See page 27.
PLAY &gt; FAST FORWARD/SEARCH
See pages 16, 21, ‘ а у See pages 16, 21.
SELECT UP SET
See pages 12-15, 18-20, 24-26, 30. I See pages 12~15, 18~20, 24~26, 30.
REWIND/ SEARCH ~~ STOP
See pages 16, 21. - See pages 14, 16, 17, 19, 21.
SET/BACKSPACE A AUSE
See pages 13, 14, 18, 19, 25, 26, O
Y
MENU ”
VA И
See pages 13~15, 20, 24, 25, 30.
SELECT DOWN
ee pages 12-15, 18-20, 24-26, 30.
N PROGRAM
See pages 18, 19, 26.
PAUSE (8) — RECORD/TIME
See pages 16, 17. A See page 17.
NUMBERED KEYS &copy; = SLOW
See pages 14, 17, 21, 26, 28. LES = a &gt; See page 16.
DISPLAY/ENTER — A С v ADD/DELETE
See pages 15, 17, 20, 22, &raquo; 8 5 NO See pages 14, 19, 25, 26.
INDEX ” 7 CHANNEL UP/DOWN
See page 21. , (TRACKING UP/DOWN)
See pages 12~14, 16, 17, 27.
SAP/Hi-Fi
See page 23. 7 / VOLUME UP/DOWN
SPEED \ See page 29.
See pages 17, 26.
ZERO SEARCH/
COUNTER RESET 1 MINUTE SKIP
See page 20. See page 20.
Front View of the VCR
POWER TRACI UP/DOWN Cassette Compartment STOP/EJECT
See pages See pages 16, 17, 27. See pages
12, 18, 19, 26. See pages 12-14, 16, 17, 27. / РОЙ 16, 17, 19, 21, 27, 30.
Z &gt;&lt;
VCR/TV L —.. FAST FORWARD/
See pages / | SEARCH
12, 17.27. &gt; | — See pages 16, 19, 21.
| SS ==&gt; = \
№ [ 2 об / | o OS —. RECORD/TIME
= ZZ = = &gt;= See pages 17, 19, 27,
VIDEO Input |
onnector
PLAY
See page 27. REMOTE See pages 16, 19, 21, 27.
AUDIO input SENSOR
onnector
See page 27. REWIND/SEARCH
Multi Function Display
See pages 11, 16-19, 26, 27.
10
See pages 16, 19, 21.
Multi Function Display
VCR Indicator
Hi-Fi Indicator
Lights when the VCR/TV
Lights when Hi-Fi audio is
selector is set to VCR. DA monitored or played back.
Power Indicator
Lights when power is on.
NL
es VCR Hi-Fi NE — |
Y y 10;
„
и
Clock/Status/Channel/Speed Display
Displays the current time.
[——
Timer Indicator
Lights when the VCR is set for a
Timer Recording, or when a length
is set for a normal recording.
Flashes when a Timer Recording is
set, but a tape has not been
inserted into the VCR.
Briefly displays VCR status when a function button is pushed.
Briefly displays the channel number, or “L1” or “L2” when a
channel or line input is selected.
Briefly displays the recording speed when SPEED is pushed.
Rear View of the VCR
AC Power Plug
While plugged into an AC outlet,
the VCR consumes 7W of
electric power in OFF condition.
Audio Output Connector (L/R)
See pages 9, 22, 27.
Video Output Connector
See pages 9, 22, 27.
IF UT na 00000000
Ш
JS
Е!
2
&quot;all
AUDIO-L vIDEO/IN FROM {a
ANT.
VHFAIHF
VHF/UHF Antenna
Input Terminal
Audio Input Connector (L/R)
See pages 24, 27.
Video Input Connector
See pages 24, 27.
Output Terminal
— See pages 6~9, 22, 24.
VHF/UHF Antenna
See pages 6~9, 22,
24, 27.
Channel 3/4 Switch
See pages 6, 12.
11
e
9
=
=
to
O
pis
e
a
pte
&reg;
Q
&copy; One Time VCR Setup
When the VCR power is first
language select screen appears automatically
turned on, the
followed by a prompt to set the clock.
неск list before you begin.
[J ATV and VCR connections are made.
(See pages 6~9.)
Back of VCR
10!
TO
+f Pang В.
100 O O ON
0}
hol
io
.
Using AV 4 keys
Whenever a menu or
program screen is displayed,
the PLAY, STOP, REWIND,
and FF buttons on the remote
control function as AV &lt;P only.
For play, stop, rewind, and fast forward
functions, use the buttons
12
on the VCR.
A.
&gt;
&lt;) &gt;
&copy;&raquo;
v
To Set the Language, Channels,
and Auto Clock
1) Turn TV and VCR on.
&copy;
Tune TV to VCR output channel (the same one
you set on the back of the VCR; CH3 or CHa).
CH ,
(A) a English on-screen
$ displays.
or SELECT LANGUAGE
Push CH Y for
Spanish on-screen
Push CH A for
PUSH VCR CH A: ENGLISH
5 PULSE VCR CH &yen;: ESPANOL
Ч У displays. APP. VCR/TV : FRAN&Ccedil;AIS
or —
Ver Push VCR/TV for
O French on-screen
displays.
* You can also set the language using the buttons on the VCR.
* If wrong language is set, see the “Reset all VCR Memory
Functions” section on page 5.
The VCR should be connected to an antenna or
cable box (page 6~9).
A Push AV to select EE E
4) E&raquo; your hookup, and VER CABLE 1655 BOKPTV
o
S/ then push P to set.
* If you selected CABLE/ SELECT:4 Y KEY
DSS BOX&raquo; VCRP TV, SET &iexcl;&raquo;&gt; KEY
continue with step 5. END MENU KEY
if not, go to step 7.
Push AV to select
your cable box or
DSS receiver output
channel number, and
then push &raquo;
&quot;lt necessary, refer to your
cable box manual.
- If you are using Audio/Video jack
connections to your cable box,
select and set &quot;VIDEO OUT&quot; as
the output channel.
| SELECT HOOKUP
CABLE/DS$ BOX-VCRETV
CABLE/DSS BOX OUTPUT CH
to enter, | SELECT:4 y KEY
END ‘MENU KEY
Turn on the cable box and set it to
6 the PBS channel in your time zone.
* If you use a DSS receiver, it must be turned off.
Push CH A to start
CH
7) QF Channel Auto Set
2 and Clock Auto Set.
* The following messages appear:
“CH AUTO SET PROCEEDING&quot;
“AUTO CLOCK SET PROCEEDING”
CHANNEL/ CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN...
PLEASE PUSH CH UP KEY
= Ged |
7125/1997 FRI 12:00PM
DST :ON
SETTING : CHO2
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
AUTO CLOCK SET
IS INCOMPLETE
PUSH MENU TO SET CLOCK
Confirm that displayed time is correct
and push CH A to exit.
If the displayed time and D.S.T. are
incorrect, please proceed as follows:
In the rare event that you live close to two
different time zones, the VCR may recognize
the wrong PBS station as the setting channel.
In this case, please do the following:
1 Make a note of the SETTING: CH number
shown on-screen and push CH A to exit.
2 Delete the setting channel from the VCR
channel memory. (See “To Add or Delete a
Channel” section on page 14.)
3 Push MENU to display the menu.
4 Push AV to select “SET CLOCK,” and then
push P to display the “SET CLOCK&quot; screen.
5 Push AY to select &quot;AUTO SET,” and then
push P to display the “CLOCK AUTO SET”
screen.
6 Push CH A to start Clock Auto Set.
&laquo; If you use a cable box and have multiple PBS
stations, tune the cable box to a different PBS
station and try auto clock set using the menu.
If the screen above appears, auto
clock set is not available in your area.
Please set the clock manually as
described at right.
SELECT/SET
(AY O)
keys
MENU ==)
7 92
О &copy; &copy;
&copy; &copy;
000
&copy; &copy; | D
ROS AN fas
= (JI CHANNEL UP
98096
Manual Clock Set
I Push MENU to
display the SET
CLOCK screen.
{SELECT MONTH
SELECT :4 Y KEY
2 Push AY and &gt; |sr &gt; ev
to select and set
the month, date,
year, time, and
D.S.T. (Daylight
Saving Time).
- See page 5 for DST.
To Make Corrections,
repeatedly push 4p to move the cursor
to the incorrect entry and make the
correction.
nen... SET CLOCK ------
{/ 4/1387 SAT 12:00PM
SET COYPLETED
3 Push MENU twice
to start the clock
and exit this mode. '
SET 4 &raquo; KEY
START -MENU KEY
IMPORTANT NOTE FOR AUTO CLOCK SET
- Auto clock set will be performed when the VCR is turned off the first time each day. If you use a cable
box and you want auto clock set to be performed, the cable box must be left on and tuned to the PBS
channel before the VCR power is turned off.
* If you use a DSS receiver, it must be turned off for auto clock set.
* If you use Audio/Video Jack connection between the VCR and Cable Box or DSS receiver, you must
also connect the RF coaxial cable in order to use the auto clock set and channel auto set features.
13
e
O
he
=
=
Ce)
0)
pair
&reg;
=
=&gt;
Ф
Q.
One Time VCR Setup (continued)
To Replace Channels in Memory
In case you have cable installed, etc.
1 Push MENU to display the menu. | MENU ========-
BET or ven
2 Push AY to select “SET UP
CHANNEL,” and then push
ED 1OMA/ LANGUE: ENGLISH
SELECT/SET ) to display the “SET UP ET ke
(ат &lt; &gt;) CHANNEL&quot; screen. END MEN KEY
MENU 3 Push AY to select
~~ stop “ANTENNA SYSTEM, and | 75507 00e =
then push P to set your AUTO SET |
antenna system (TV or CATV).| Ver ross on ser up.
NUMBERED av
keys | ADD/DELETE 4 Push AY to select “AUTO SET KEY
SET&quot; and then push № 10
display the “CHANNEL/CLOCK
AUTO SET” screen.
If you use a cable box, turn it on and set it to
the PBS channel in your time zone.
- To exit this mode, push MENU twice.
5 Push CH 4 to start | CHANNEL? CLOCK AUTO SET |
Channel Auto Set. CONNECT ANTENNA CABLE
CHANNEL UP
100 key 7
* Clock Auto Set will be AND IP YOU USE &Agrave; CABLE
performed when channels LOCAL PBS CH THEN...
are replaced in memory.
To cancel, push STOP
when “AUTO CLOCK SET
PROCEEDING&quot; appears on-screen.
PLEASE PUSH CH UP KEY
To Change On Screen Display Language
1 Push MENU to display the menu. [--------- Too. )
Роу ce Ue ED. To Set or Reset the Clock
2 push AY to select SET CLOCK МЕ, In case the clock is wrong, or a power failure occurred.
the language. 1D OMA/ LANGUENS EE
English: LANGUAGE SELECT :4 y KEY I Push MENU to display the. f--------- MENU ---=-----
Spanish: IDIOMA END &iquest;MENO KEY | menu. BET UP VCR
rench: LANGUE SET UP CHANNEL
2 Push AY 10 select “SET ID TOMA LANGUE: ENGLISH
3 Push P repeatedly to change the language. CLOCK,” and then push &raquo; FF. SET ELOCK --....
to display the “SET CLOCK&quot;
Eee МЕМИ === ===) screen. A ЕТ
eue PU ven —]
SET UP CHANNEL | PREPARAR VCR [== MENU =-==-==-- 3 Push AV to select “MANUAL, | SELECT:a &yen; KEY
Ee rs oo ELAS MD SET,” and then push P to END MENO Key
SET x CLEGIR:4 y EM FRANCAIS display the SET CLOCK screen.
FIJAR :&raquo;
TERMINAR MEN Gene | 4 Push AV and 4 to select
5 - and set the date, time, and
4 Push MENU to exit this mode. D.S.T. (Daylight Saving Time). |
SELECT:4 Y KEY
5 Push MENU twice to start the | ser ia&raquo; kev
clock and exit this mode.
To Add or Delete a Channel
* For Auto Clock Set, select “AUTO SET&quot;
I Select a channel using the | CHANNEL 08 ADDED and then push CH &Agrave; in step 3.
NUMBERED keys to add
or CH AY to delete. CHANNEL 08 DELETED
2 Push ADD/DLT to add or When Using the 100 key
delete Ine channel. once it a When selecting CATV channels 100 to 125 with the
deleted, use the NUMBERED | NUMBERED keys, first push the 100 key and then
keys on the remote control. enter the remaining two digits.
Deleted channels will flash in the Multi For example, to select channel 125:
Function Display on the VCR when selected. Push NUMBERED keys 100, then 2, then 5.
for * This VCR will accurately maintain its calendar up to Dec. 31, 2015, 11:59PM.
&lt; J &deg; Normal TV or Cable channels are automatically selected and placed in memory depending on how your VCR is hooked up.
14
Function &amp; Channel Display
When a function button is
pushed, e.g. PLAY, or you
change channels, a 4 second
display appears first in large
and then small characters.
(Some station names may
also appear.)
PLAY
Menu Screen
1 Push MENU to display
the menu.
2 Push AY and to
make your selection.
SET UP CHAN
1D (OMA/ LANGUE: ENGLISH
* To get the most from each feature, please read the
Operating Manual before attempting any operation.
VCR Status &amp; Clock Display
Push DISPLAY to display or
E С) remove the overlay shown below.
DISPLAY
Function Status
Current Time
Channel &amp;
Rec Time REC 12:00AM „снов + Call Letter
Remaining — 9: 0:06:00
(OTR mode only | stereo) &laquo;
see page 17.) (SAP) N
Tape Speed
Broadcast Audio
Being Received Counter
(See page 22)
* This display will
disappear in 5 seconds.
Blank Tape/ No Video Signal Indication
When a blank section of tape comes up in Play
mode, or the selected channel has no broadcast
signal, the TV screen will turn solid blue.
| On-Screen Displays (OSD)
Warning and Instruction Displays
These displays will alert you of a missed operation or
provide further instructions.
If no active channels are
found for CHANNEL
MEMORY...
(See page 13.)
If you attempt to set or
review a Timer Recording
and the Clock is not set...
(See page 18.)
After a Timer Program
has been set...
(See page 18.)
If you push REC on the
remote control or VCR,
and a cassette is inserted
with no record tab...
(See page 17.)
If you push PLAY, FF, REW,
or REC on the remote
control or VCR without
a cassette inserted...
(See pages 16, 17.)
If you push POWER or
STOP during a Timer
Recording...
(visible in VCR mode oniy)
(See page 19.)
If head cleaning becomes
necessary while playing
back a tape...
(See page 5.)
If you push a function button
other than STOP/EJECT or
POWER while the VCR is in
VCR Lock mode...
(See page 30.)
r
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH YCA CH UP KEY AGAIN
PLEASE SET CLOCK
BEFORE PROGRAMMING
TURN VCR OFF
FOR TIMER RECORDING
CHECK CASSETTE
RECORD TAB
NO CASSETTE
PLEASE INSERT A CASSETTE
r
=
TO CANCEL TIMER REC
PUSH POWER THEN STOP KEY
| END:PLAY KEY
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
VCR LOCK ACTIVATED
15
Playback a Tape
NA check list before you begin.
[J All connections are made.
(See pages 6~9.)
LL] TV and VCR are plugged in.
[_] TV is turned on and set to the VCR
channel (CH 3 or 4).
TRACKING/ Multi FF/REW
V-LOCK Function Search
Display
PLAY C20 FF/REW
Search
&reg;
&reg;
PAUSE” В&copy; (2)
A &copy; &copy; &copy;
SLOW &copy; &copy;
&copy; &copy; |
&quot;ES A A)
= О Ой теж
свя
~
Caution:
Please inspect your cassette tapes for
any loose or peeling labels as they
may become jammed in your unit.
Insert a cassette.
* VCR power comes on automatically.
This indicator lights in the
Multi Function Display.
~ | rs
— VCR —
ON
Push PLAY on the remote or VCR
to start playback.
&laquo; Playback begins automatically
if cassette has no record tab.
Push STOP on the remote or VCR
to stop playback.
srorexcr &gt; PUSh STOP/EJECT on the VCR
to eject the cassette.
* You may eject a cassette with power on or off.
To Find a Particular Scene During Playback
Push REW or FF during playback
or
to search for a scene.
- Search speed for SP mode tapes is 9 times and
SLP mode tapes 27 times the normal speed.
- Some noise bars will appear during search.
Special Effects During Playback
These features work best in SP or SLP mode. The sound will be muted.
Slow Motion Playback
Push SLOW to start slow motion playback.
Push PLAY or SLOW to release.
Still (Freeze) Frame Picture
Push PAUSE to freeze and release the picture.
- To reduce picture noise, first push SLOW. Then, use CH (TRACKING)
A/V to clear up the picture, then push PAUSE.
Frame by Frame Advance
In Still mode, hold down SLOW to advance the still picture one
frame at a time. Push PAUSE to release.
Features for a Quality Picture
Digital Auto Picture
This feature automatically controls the video output signal for less
noise depending on the tape condition.
Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for optimum
picture quality.
Manual Tracking Control (to reduce picture noise
Use during Playback and Slow Motion mode to reduce picture noise.
Push CH (TRACKING) 4/Y during playback until the picture clears up.
To return to Auto Tracking mode, push POWER off and then on again.
V-Lock Control (to reduce picture jitter)
In Still mode, CH (TRACKING) A/&yen; operate as a
V-Lock control. Push A/&yen; until the picture is stabilized.
am * After the VCR is in Still or Slow mode for 3 minutes, it will switch to
the Stop mode automatically to protect the tape and the video head.
&copy; Record On a Tape
1) Insert a cassette with record tab
- VCR power comes on automatically. 7 N
cheer list before you begin.
[1 All connections are made.
(See pages 6-9.)
[] VCR is Plugged in.
[] TV is turned on and set to the VCR
channel (CH3 or CH4). cH Push CH A/V or STOP CHo2 |
j NUMBERED keysto — | oro
&agrave; select a channel. (SAP) ,
Or, push CHANNEL 4/Y
CHANNEL on the VCH.
Up/Down @ &copy; Holding down CH 4/Y
will increase the channel
search speed.
To record from an outside source, push CH 4/Y or
INPUT to select “LINE1” or “LINE?” (see page 27).
VCR/TV Multi Function Push SPEED to change
Display (&copy;) 0 the recording speed. sie
+ SP = Standard Play
LP = Long Play
SLP = Super Long Play
(See page 5.)
Push REC/TIME on the remote
control or VCR to start recording.
To edit out unwanted portions, push PAUSE to
pause the recording in progress.
&copy; To release, push PAUSE again.
(After the VCR has been in Pause mode for 5
minutes, it will stop automatically to protect the
tape and video head.) y
PAUSE
x
o
Le,
1
=
o
o
=
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, push REC/TIME repeatedly to set the length of the
recording. Each push will change the stop time as shown.
DISPLAY i @ Normal Rec ——0:30 —1:00
o 4
CONTR pos CHANNEL 00 3:004+— 2:004— 1:30
q ‘ Up/Down
&reg; LC - “TIMER” lights in the Multi Function Display.
- The remaining recording time can be displayed by pushing
DISPLAY in OTR mode.
= В
Push STOP to
O stop recording.
* Or, push STOP/EJECT on the VCR.
Record One Program While Watching Another Selecting Channels at the VCR
1 Push VCR/TV while recording is in progress to turn I Turn your TV and VCR on.
off the VCR indicator in the Multi Function Display. + VCR Indicator lights on the Muiti Function Display.
If indicator doesn't light, push VCR/TV to turn it on.
2 Use the TV channel controls to select a program.
The VCR will continue to record your program while 2 Use CH A/V on the remote contro! or VCR
you watch any channel you choose. to select channels.
+ To switch back and forth between the recording and * To switch back to TV channel selection, push
the VCR power off.
17
You can set up the VCR to record a one
time, daily, or weekly program while you
are away or otherwise occupied. Up to 8
programs can be stored in memory,
V checr list before you begin.
L] All connections are made.
(See pages 6-9.)
TV and VCR are plugged in and turned on.
VCR/TV selector is set to “VCR.”
[I Ctock is set to correct time.
[_) Record tab in place. (See page 5.)
7) Multi Function Display
&copy;
of Ok
Y)
Of
|
В
У
3-00
=
(&copy;
VW
ENENC
&copy; &copy; &copy;
=
90000
o
3000 &copy; &copy; O&ugrave;
О}
RO
O
&copy;
|
Important notes when using a
DSS receiver
* When recording programs via a DSS
receiver, the DSS receiver must be
eft on.
* When recording programs via an
antenna or cabie, the DSS receiver
must be turned off.
Timer Recording
Push PROG to display
O the “SET PROGRAM”
Push AY to select
“TIMER PROGRAM,”
and then push P to
display the program
screen.
&laquo; If a program is already in memory,
push AV and P to select an unused
program number.
screen.
@ &amp;
(&gt;
E
wv
VCR Plus+ PROGRAM
TIMER PROGRAM
SELECT:4 Y KEY
SET &gt; KEY
END :PROG KEY
RATE |, START STOP CH
SELECT START DATE
SELECT :&agrave; Ÿ KEY
SET &gt; KEY
| END :PROG KEY
Push AY and } to select and
A.
&copy;) do) set one of the following:
“ 1+31 =One time recording
wv
&laquo; DAILY =Same time МОМ-ЕН!
+ WEEKLY =Same time once a week
Example
B a Qin 4 — 1 — Divenne. 6
Today's — 7 SELECTA / Selection Order DAILY
Date
L_WEEKLY NU _WEEKLY __ WEEKLY
(SAT) (MON)
(SUN)
Push AY and &lt;&gt;
to select and set
= each of the remaining
items at right.
To Make Corrections
Repeatedly push P to move the cursor to the right,
or “to move to the left to the incorrect entry and
make the correction.
Remaining Items
to be set:
* START time
- STOP time
+ CH(annel) number,
or LINE for outside
source recording
‚Speed (SP, LP, SLP)
Push PROG to end
the program.
* This screen appears for
confirmation.
O o
To Enter More Programs
Push AY and &gt; to select and set a blank
program number, and then repeat steps 3 and 4.
P BT START STOP CH SPD
1DAY 9:00A12:00A 08 SP
2 == io ei == ==
Bi ei == ==
4 —— —-—--- === = =
CANCEL : ADD/DLT KEY
SELECT 1-8:4 Y KEY
ENTER :&raquo; KEY
END PROG KEY
Push PROG to exit this
mode and return to the
normal screen.
Push POWER off
to set the timer.
+ When recording programs via
a cable box, make sure the
cable box is left ON and
tuned to the desired channel.
= |
~~
sd | IMERES
| ~
Multi Function Display
- &Agrave; cassette with no record tab is ejected and TIMER indicator flashes when the power is turned off to set the timer.
- If the start times of two programs overlap, the lower numbered program will have priority.
+ if the start time for a timer recording comes up during a normal recording or One Touch Recording (page 17),
the timer recording will not be performed.
- if there is a power interruption of more than one minute, the recording will not be performed or continue.
EL.
POWER Multi STOP
Function
Display
POWER
SELECT/SET
(AY O)
keys
STOP
o СЭ | Л
&copy; 28 DS proc
&copy; &copy;
000
(0) &copy;—{— ADD/DELETE
CES A (a):
300
Те бы |
Cancel a Timer Recording:
(Recording is in progress)
Push POWER and then STOP within 10 seconds to cancel
the timer recording.
+ The TIMER indicator goes out in the Multi Function Display.
Replace Program Contents:
(Recording is not in progress)
1 Push PROG to display the “SET
PROGRAM&quot; screen.
2 Push AY to select “TIMER
PROGRAM,&quot; and then push P to
display all currently set programs.
3 Push AY and&raquo; to select and set a
program number. (See page 18.)
&Agrave; Push AV and &lt;&raquo; to select and set
replacement timer information.
5 Push PROG twice to exit this mode.
VOR Plus+ PROGRAM
P DT START STOP CH SPD
2 8 10:00Р12:00Р 125 SLP
3 10 8:00P Y:00P 10 SP
4 SU 9:00P10:00P L SLP
SELECT 1-B8:4 Y KEY
ENTER :&raquo; KEY
| END ‘PROG KEY
QAJE); START STOP CH
8 ЗАТ 10:00Р 12:00Р 125
7] SLP
E A O A AO O A LE
[SELECT START DATE]
SELECT :&amp; Y KEY
SET 1:4 о&raquo; KEY
END :PROG KEY
Review or Clear Program Contents:
(Recording is not in progress)
1 Push PROG to display the “SET
PROGRAM” screen.
2 Push AY to select “TIMER .
PROGRAM,” and then push to
display all currently set programs.
3 Push AV to select a program number.
4 Push ADD/DLT to clear the program.
5 Push PROG to exit this mode.
VCR Plus+ PROGRAM
TEER
P DT START STOP CH SPD
2 8 10:00P12:00P 125 SLP
3 10 8:00P 9:00P 10 SP
4 SU 9:00P10:00P L SLP
CANCEL :ADD/DLT KEY
SELECT 1-8:4 Y KEY
ENTER : KEY
END :PROG KEY
P DT START STOP CH SPD
2 8 10:00P12:00P 125 SLP
3 10 B:00P B:00P 10 SP
4 SU 9:00Р10:00Р L SLP
SELECT 1-8:4 &yen; KEY
ENTER :&raquo; KEY
END PROG KEY
STOPEJECT REW/ =} PLAY ЕР; (==) REC/TIME
Timer Recording Using VCR Buttons
(Make sure a cassette tape is not inserted in the VCR.)
1 Hold down STOP/EJECT and push REW to enter the
Program mode.
2 Push FF or REC/TIME repeatedly or hold down
to make selections.
3 Push PLAY to set the item and move on.
* To make corrections, repeatedly push PLAY to move the cursor
to the right, or REW to move to the left to the incorrect entry and
make the correction.
4 Push STOP/EJECT and REW together to display program
contents after all items have been entered.
* You cannot clear programs with the VCR buttons.
5 Hold down STOP/EJECT and push REW, (release REW first,
and then release STOP/EJECT) to exit this mode.
6 insert a cassette with record tab and push POWER off to
set the timer.
19
ровен ныне НОС СОННИ)
Your VCR is equipped with several
time saving features as well as
convenient automatic functions making
tape operation easier than ever.
СООО
O
Е
o
o
В
0,
=
9-0
DE
= S 9168
@ 558
&copy; &copy; &copy;
000
OO |
Ces &Agrave; a
= (J 0
8
&copy;
i
0-0
[ Auto Operation Functions |
Auto Playback
When a tape is inserted, the power
turns on (Auto). If the record tab” is
removed, playback begins (Auto).
Auto Rewind
When a tape reaches its end during
playback, fast forward or manual
record, the VCR will rewind and go
into Stop mode.
Playback Auto Eject
(Repeat Play is “OFF.”)
When a tape without a record tab&quot; is
played to its end, the VCR will rewind
and then eject the tape.
Memory Rewind Off
When the POWER button is pushed
during rewind, the VCR will turn off
after rewind is complete.
* For record tab information, see page 5.
20
7 A la ре Operation
al Our Vacation ||
Repeat Play
The VCR will play your recording over and over.
Push MENU to
O display the menu. for MENU -=-------
SET UP VCR
SET CLOCK
SET UP CHANNEL
ID | OMA / LANGUE: ENGL | SH
a Push AV to select | suect:av ev
(2) &laquo;ES &gt; “SET UP VCR,” and END MENU KEY
&lt;/ then push P to display
the “SET UP VCR&quot; screen.
9) A Push AY toselect [------ SET UP VCR ------
d=) “REPEAT PLAY,” and : ON
then push P to select | 7 &deg;&deg;
Li n и &quot;
ON” or “OFF. SELECT:4 Y KEY
* The VCR plays back the tape to its SET :b KEY
end or until a blank portion of over | END MENU KEY
30 seconds is detected (erased
portions are not considered blank). The tape is then rewound
and played again and again until Repeat Play is turned off.
a Push MENU twice to return
O to the normal screen..
One Minute Skip
The VCR rapidly skips over one minute of tape.
zero Push ZERO/ 1 MIN
in Play mode.
1 MIN
“ The VCR will go into FF search mode and skip over 60 seconds
of recorded time. Normal playback will then resume.
Zero Search
To quickly return to a specific tape location.
Push DISPLAY to | STOP 12:00AM о. СНОВ
a (an) display the Time ar
(STEREO)
Counter overlay. (SAP)
MONO 4
Push COUNTER STOP 12:00AM CHO8 |
‘a RESET to reset the &gt; SP
RESET Time Counter to (Samy
“0 00 ‘00 2 MONO 4
* This may be done at as many places
as you wish on the tape.
ZERO! Push ZERO/1 MIN
&copy; in Stop mode.
1MIN - The VCR will go into FF or REW mode and stop at
the last point the Time Counter was set to 0:00:00.
VHS Index Search System
Each time you start a recording,
an invisible index mark is
automatically placed on the tape.
You can then use these index
marks to access or scan your
recordings.
REWIND FAST FORWARD
9-0 00
REWIND
FAST
FORWARD
O
+ Make each entry within 10
seconds, or the Index Search
NOTES mode will be canceled.
\_ _/ * Index marks will be placed
tor Timer recordings as well.
* If the Direct Access index search is
initiated extremely close to an index
mark, there is a possibility that the index
mark will not be counted in the search.
Direct Access
This feature allows you to go directly to the recording you want
from anywhere on t
e tape by entering a specific index number.
noex Push INDEX in
С) Playback or Stop mode.
INDEX
Push a NUMBERED keys to
select the desired recording.
&laquo; To calculate the number, see below.
INDEX 04
- Push REW or FF to
start the Index Search —
or forward or backward.
e * When the designated location
is reached, the VCR goes into
Playback mode.
INDEX SEARCH 04
To calculate an Index Number
Count forward or backward each recording start point, including the
recording you want to see, from wherever you are on the tape.
Example 1:
If you are watching recording 4 and you want to watch recording 2, count the
start points to number 2. Recordings equal 3. Enter 3 in step “2” and push REW.
{ }
Example 2:
If you are watching recording 2 and you want to watch recording 6, count the
start points to number 6. Recordings equal 4. Enter 4 in step “2&quot; and push FF.
Index Scan
This feature allows you to scan {forward or reverse} each recording
for 10 seconds in Playback mode.
noex Push INDEX in
Playback or Stop mode.
INDEX
Push REW or FF
to begin the scan.
or
+ As each index mark is
FF 04
AUTO INDEX SEARCH
ОД че) под элоу\!
reached, a short playback will rl
&gt; be performed after which FF ,
or REW resumes.
Push PLAY to cancel the
scan and begin playback.
* You may also push STOP to
stop the tape.
Start here
PLAY
Current 1 Program
A + a т
+ +
t Indexed Point
My Play (for about 10 seconds)
— Fast Forward or Rewind
—— | |
TT
STOP
21
&quot;check list before you begin
[J The VCR is connected to a stereo TV, or a mono TV and an external stereo amp or receiver with speakers.
LC] The VCR and other components are plugged in and turned on. |
Connections
to Make
In from Antenna
Stereo
When recording, you may monitor in stereo,
by connecting the VCR to either a stereo TV,
or a mono sound TV with an external stereo
amp and speakers.
DISPLAY
a: NO O ONO
0
1D
EOS
MO ODO
1010 &copy; &copy;
4 tree |
|
Equipped with dbx&reg; -TV Noise Reduction
for true MTS reproduction. bx” -TV
Noise Reduction is required for good
stereo separation and audio fidelity.
dbx” is a registered trademark, and is
licensed by dbx” Technology Licensing.
22
Mono
Stereo AMP
or Receiver
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen displays.
Parenthesis indicate signal(s) not being received. The arrow indicates the
selected audio mode.
Push DISPLAY to display the broadcast
DISPLAY
2
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously. Select
STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
* If a stereo broadcast is weak and the display
flickers, you may want to select the MONO
audio mode for better results.
SAP broadcast
Secondary Audio Program (sub language)
broadcast. Select SAP audio mode for the
sub language.
NO broadcast
Normal monaural sound broadcast.
signal currently being received.
No] MTS Broadcast/ VHS Hi-Fi Stereo System
STEREO &laquo;
SAP
MONO
Le
| STOP 12:00AM CHOS |
0:00:00
SLP
J
STOP 12:00AM CHOS |
0:00:00
SLP
STEREO &laquo;
(SAP)
MONO
Г hy
STOP 12:00AM СНОВ
0:00:00
SLP
(STEREO)
SAP 4
MONO
al A
STOP 12:00AM CHOB
0:00:00
(STEREO)
(SAP)
MONO €
With the proper audio mode setting, your VCR can:
1) record and playback an MTS stereo broadcast (main language) in stereo Hi-Fi.
2) record and playback a monaural broadcast {main language) or Secondary Audio Program (sub language) on the Hi-Fi
tracks for better quality monaural sound.
3) playback non Hi-Fi tapes in monaural.
&laquo; When recording, the selected broadcast sound is always recorded on the left and right Hi-Fi tracks as well as the normal
monaural track. This means your tapes can be played back on Hi-Fi as well as non-Hi-Fi VCRs.
Audio Mode for Recording
SAP! Push SAP/HI-Fi
repeatedly (each
Hi-Fi push within 5
seconds) to select
the desired audio
mode (STEREO,
SAP, or MONO).
+ Please refer to the “Receivable Broadcast
STEREO 4
SAP
MONO
—
&laquo; The arrow indicates
your selection.
ee Types” section on page 22.
= DE
&copy; &copy; &copy;
&copy; &copy; &copy; Do a recording.
&copy; See the “Record On a Tape” section on page 17.
&reg; 0 |
ES A Ay
500
@ — 8288 |
O Audio Mode for Playback
Playback the tape.
| a See the “Playback a Tape” section on page 16.
SAP! Push SAP/Hi-Fi
repeatedly (each
HF push within 5
seconds) to select the
desired audio mode
(HIFI or NORMAL).
* Select “HIFI” to listen to your stereo
recordings with stereo sound, or
“NORMAL” for monaural sound.
+
r
HIFI 4
NORMAL
- The arrow indicates
your selection.
&laquo; When purchasing or renting prerecorded tapes, remember that only those recorded in Hi-Fi stereo will play back
with true stereo sound. Standard stereo tapes will play back with monaural sound.
+
This is normal.
* There may be a difference in audio level between Hi-Fi and normal audio playback.
| NOTES | externa! stereo amp and speakers. (See page 22.)
In order to listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV or an
* When adiusting the tracking during playback, the Hi-Fi audio sound may revert to normal audio sound.
23
q cfr VCR Plus+ Setup
Easy Taping.
At first, choose your Connection Type.
(Then, follow the instructions under the diagram.)
( Connection Type A
&lt;CABLE BOX + VCR + ТУ&gt;
J
ADL! ....Back of VCR.
&Agrave; == $5
: &quot; on ! RFS :
be = “ 59380 WJ
“Gable Box TT - Femme — T
Back of TV еее
Or, &lt;ANT/CABLE BOX &gt; DSS BOX &raquo; VCR + TY&gt;
Ra Box Back of саит
DSS Box Oish
0 | ome Vere i
Back of TV
HI Back of VCR
If your system connection looks like one of
the diagrams above, do the following.
1. Complete “Cable Box Setup” at right.
2. VER page 25 and go directiy to page 26 for
lus+ Programming.
[ Connection Type B )
&lt;YCR &gt;&raquo; TY&gt;
у Back of VCR Back of TV
From Antenna | TE г
or Cable Eee TT oR
===) | A-AUDION-L VIDEO an,
DDD 5,
&quot;9099 &amp;
RF Coaxial Cable
(supplied}
Or, &lt;VCR &raquo; CABLE BOX &gt; TV&gt;
| ‚Back of VCR Back of TV
From Antenna N EE a
or Cable 0 = ees Arar
m DS a
00
RF Coaxial Cable
RF Coaxial (supplied)
This connection allows
viewing (not recording) &deg; @ Om
of scrambled channels.| cable Box: Qu Dun
If your system connection looks like one of
the diagrams above, do the following.
1. Skip “Cable Box Setup” at right and turn
to page 25.
2. Complete “VCR Plus+ Channel Setup”
on page 25.
3. Turn to page 26 for VCR Plus+ Programming.
24
Cable Box Setup
For Connection Type A (see left) oniy
Oo
Push MENU to
display the menu.
VCR Plus+ programming allows you to set most items of a timer recording by simply entering a special
code (PlusCode) found in TV GUIDE magazine as weli as the TV listings in selected newspapers. In order
for your VCR to do a VCR Plus+ recording, or a timer recording of cable stations, some setup is required.
SET UP VCR
ET CLOCK
IDIOMA LANGUE: ENGL | SH
&copy; o
Push MENU twice
to end the
setup and return to the
normal screen.
Go directly to “VCR Plus+ Programming”
|
|
|
|
|
| a Push AV to REY
| &laquo;ED&raquo; select “SET UP ED MEW KEY
| = CHANNEL,&quot; and
| then push P to display the
| “SET UP CHANNEL” screen.
|
| A Push AV to --- SET UP CHANNEL ---
| E select “CABLE/ ANTENNA SYSTEM : CATV
| 57” DSSBOXSET UP,” | durara
| and then push D | VCR Plus+ CH SET UP
| to display the SELECT: y ev
| “SELECT НООКуР” (8% vent rev
| screen.
|
A, Push АУ ю Ho
| Er select your VCR CABLE/DSS BOXPTV
= hookup, and then
h &reg; to set.
EEE ET
| - If you selected CABLE/DSS &Agrave;
| BOXPVCRPTV, continue with step 5.
| It not, push MENU three times and turn to page 25.
|
| A P
ush AV to SELECT HOOKUP |
| &copy; Er select your cable CABLE/DSS BOX&raquo;VCRFTV
v box or DSS CABLE/DSS BOX OUTPUT CH
| receiver output
| channel number, | seLEcT:4 y KEY
| and then push &gt; END MENU KEY
| to enter.
| * If necessary, reter to your cable box manual.
| * If you are using Audio/Video jack connections to your cable
| box, select and set “VIDEO OUT” as the output channel.
|
|
|
|
|
|
|
|
|
|
|
оп раде 26.
In order for the VCR 10 read the VCR Plus+ code, some set up is required. A Guide (VCR Plus+) channel number is assigned to
each local broadcast and cable station. Because this number sometimes differs from the channel your TV receives the station
on, it is necessary to program the VCR with local channel information.
VCR Plus+ Channel Setup
For Connection Type B (page 24) only
- Before you begin, complete the Channel Setup
Preparations below left.
important Note:
e &reg; If your VCR connection type changes from type A to B, repeat
LI A steps 1-4 of page 24 and select VCR&gt;CABLE/DSS BOX&raquo; TV
6) &copy; or VCR&raquo; TV before proceeding with these steps.
= &gt; 7 Push MENU to [--------- MENU --------- |
D 29805 @ O display the menu. SET UP VCR
&copy; &copy; &copy; &copy; | 1G 1OMA/ LANGUE: ENGL | SH
о &copy; &copy; SELECT :4 Y KEY
&copy; &copy; &copy; &quot;a Push AV to select END MENU Key
O O E ADD/ &laquo;&gt;&raquo; “SET UP CHANNEL,”
FE A A DELETE 2/&quot; and then push &gt; to display
s 00 the “SET UP CHANNEL” screen.
BORO |
&copy; a Push AV to select [--- ser up CHANNEL ---
&gt; “VCR Plus+ CH SET | antenna system : CATV
‘ › UP,” and then push № | Es nox SET UP
” to display the “VCR
Plus+ CH SET UP” | SELECTA y KEY
screen. | END &quot;MENU KEY
Channel Setup Preparations
NOTE: Complete the steps on this page if your .
VCR hook-up resembles “B” on page 24. IMPORTANT NOTE:
Prepare a list like the example below.
For step “d,” use the list you prepared. You may leave lines
This list will help vou smoothly enter the blank if you don’t receive that station, or if the GUIDE CH
information nesded in step &eacute;d at right. number and the CATV (or TV) CH numbers are the same.
You will need the following to complete the list: A Push &gt; to move VCR Plus+ CH SET UP |
ES A line up of normal and/or cable stations you d 4 &raquo; the shaded area to GUIDE CH CATV CH
receive along with the channel numbers your o i i - _
TV receives them on. &Agrave; cable channet line-up v the right side. ” = --
chart is supplied by your cable company. SELECT 4 Y KEY
EN A list of Guide (VCR Plus+) channel numbers END MENU KEY
assigned to the stations you receive. This list is Then, push AY to change CATV N
available in TV Guide and the TV listings found or TV CH number.
in selected newspapers. VCR Pluss CH SET UP
Next, push &lt; to set the number. GUIDE CH CATV CH
Make a chart with 3 columns like the example
1 below. In the left column, fill in the name or call Now, push AY to continue. В &gt; 02 =
letters of the stations you receive. Repeat this operation until the list is SELECT:4 Y KEY
&copy;) In the middle column, fill in each stations complete. END MENU KEY
assigned Guide (VCR Plus+) number found in - ”
TV Guide, newspapers, etc. To Make Corrections
3 In the right column, fill in the channel number Push AV and to select the incorrect CATV or TV CH number.
that your TV receives the station on from your Then, push AV to change, or ADD/DLT to delete the channel.
channel line-up.
Push MENU three times
EXAMPLE ONLY
O to exit the VCR Plus+ CH
Assigned |Channel no.
Broadcast or Cable | Guide your TV SET UP mode.
Station Name (VCR Plus+) | receives the
channel no. | station on
HBO 33 15 /=—N + Make each entry within 5 minutes or the VCR will leave this mode.
Nickelodeon 38 20 NOTES) . Once local channels have been programmed, they will stay in
memory, even in the case of a power failure.
CBS 04 04 у P
FOX 11 VCR Plus+ and PlusCode are trademarks of Gemstar
N Development Corporation. The VCR Plus+ system is manufactured
— under license from Gemstar Development Corporation.
wg VCR Plus+ Programming
VCR(
Easy Taping. Push PROG to ----- GET PROGRAM ---—-
O display the “SET NOME
”
Y Betore you begin, make sure... PROGRAM&quot; screen. TIMER PROGRAM
[J The clock is set. VCR Plus+
[J VCR Plus+ Setup is complete A Push AV to select ENTER PLUSCODE NUMBER
(see pages 24, 25). &laquo; &gt; “VCR Plus+ N&deg;
= PROG RAM м and then USING 0-9 KEYS
push P to display the
“VCR Plus+” screen. (END ‘PROG KEY
Push the NUMBERED keys to VCR Pluss
| | enter the PlusCode number. ENTER PLUSCODE NUMBER
Multi Function Display | = as
Refer to your local TV listings. 123456
To Make Corrections USING 0-9 KEYS
Push 4 repeatedly to delete the PlusCode | BACKSPACE 4 KEY
number. Then, enter the correct number. ?
al Push PROG to lock in
O your program.
6) Push the 1, 2 or 3 key to VCR Plus+ |
select the program type. OAL nr
TO SELECT PUSH 1,2 OR 3
: To change the recording speed: DATE START STOP
@ Push SPEED for SP, LP or SLP. JARRE:
ADDY &gt; cancel program contents: POST ENCE RECORD SPEED
US .
DELETE cup
SPEED 3-5 [m] О * If you use connection type “A” on page 24, the channel shown in this
Bl on-screen display will always be the cable box output channel number. =
В on ie = ‘об бы то ба E22
O if contents are
acceptable. &gt;
CANCEL :ADD/DLT KEY
SELECT 1-8:4 Y KEY
Use normal Timer Recording steps if: END PROG KEY
* the PlusCode for a program is not listed.
* you anticipate the program, such as a sporting
event, to run over the scheduled stop time. 7) Push PROG to URN VOR OFF
м &quot;оо = &quot;о —— ——
+ a
TURN
complete th FOR TIMER RECORDING
program. &copy; LEAVE CABLE BOX POWER ON
See page 19 to:
+ cancel a timer recording in progress.
* replace program contents.
&laquo; review or clear program contents once set.
+ If you're using a Cable Box, make sure
that it is tuned to the desired channel and
the power is left on for timer recording.
&raquo; This display may differ depending
on your cable box hook-up.
Important notes when using a DSS receiver
&raquo; When recording programs via a DSS receiver,
the DSS receiver must be left on. EZ Push POWER off - TIMER
| | MN to set the timer.
When recording programs via an antenna or (o) DI
cable, the DSS receiver must be turned off. NL
Multi Function Display
NN * VCR PlusCodes can not be used to program the VCR to record DSS channels.
NOTES, + Avoid overlapping program times.
\. / + An on-screen display will indicate if an invalid PlusCode number has been entered or when all timer programs are full.
26
Le Fy Copying Your Tapes (Dubbing)
Connections you'll need to make. (Choose front or rear connection.)
&raquo; When connecting to a normal VCR, use the L Audio In jack for proper sound reproduction.
Playing (Source) VCR Recording (Editing) VCR TV for Monitoring
(Audio Out (L)
Video In
N
N
CH3 or 4
*
FAUDID 4 WIDED N
Audio In (L) ). &laquo;O DO
/ BB Audio In (R) : D
Vi !
(Audio Out (R) )
Audio In (L/R)
Insert a pre-recorded To Monitor Dubbing on Your TV
tape into the Playing TEN |
(Source) VCR. те 1 Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2 Set the VCR/TV Selector on the Recording
VCR to “VCR.”
Insert a blank tape
2) with record tab into the y CO A
Recording (Editing) VCR. = + :
Selecting the Input Mode
Push INPUT. The display will
INPUT change in the order below. =
Select “LINE” Input mode on the Channel ——— LINE1 O
Recording (Editing) VCR. (See (C Namber 5 =
“Selecting the Input Mode” at right.) LINE? &lt;
or oO
с
сн Push CH 4/Y. The display will
Push PLAY on the Playing VCR. | i change in the order below. +
Push PAUSE at the desired starting point. 1—2—3 =
y (CATV) (TV)
LINE2&laquo;—LINE14— 125 or 69 5
5) Push REC on the Recording VCR, * LINE1: For rear audio/video connection.
and then push PAUSE LINE2: For front audio/video connection.
immediately thereafter.
Push PAUSE on both VCRs at
the same time, to_begin copying.
* When LINE is selected, “L1” or “L2&quot; is displayed in
To Edit Out Unwanted Parts the Multi Function Display for about 4 seconds.
Push PAUSE on the recording VCR while copying is in
progress. Push PAUSE again to resume copying.
Caution:
Push STOP on both Unauthorized exchanging and/or copying of copyrighted
VCRs to stop copying. recordings may be copyright infringement.
27
Multi-Brand Control Feature
CT _— — —_— — —_ _— —_— &quot;— — &quot; &quot;_&quot;_— &quot; &quot;— &quot;&gt;&quot;
The Remote Control may be set up to control some of the functions on your TV or Cable Box.
TV Brand Code Numbers
Panasonic res 01, 02 Sylvania ......--............11111 eme. 05 | (O 11
Quasar .............eeecerccerciz iia 01, 02 Sharp ..............ee...e.esa.n.. Darren 06, 07 Hitachi ……………......rercarressessarernensenn ee 12
RCA ...rninioconiinenerinonzanororenaranaorenences 03 SONy ...........eeeeerrorcarrervereenreraano rene 08 Mitsubishi............e......eencanco. 07, 13
GE TT 03 Toshiba cocoon 09 Samsung ...............—. RE 14
VA ноыооооенененжннненнннное 04 Sanyo .........——.-rr.emmesveereoorenareencaeres 10 Gold Star ..................——.—.. 15, 16, 17
Magnavox ..................eceersocecereeronas 05 FiSher cocoons veces 10
Archer ..............eenceceacs O1, 29, 44, 88, 91
Cableview … 04, 30, 42, 44, 52, 63, 85, 88
Citizen …… 04, 30, 42, 44, 52, 63, 85, 88 VCR
Curtis .............—..e..e. 08, 09, 56, 61, 87, 90
Diamond ................—e.... 01, 29, 44, 88, 91
Drake ..................essenorreorineeneeo. 37, 67, 71
Eagle........... 13, 20, 22, 26, 40, 58, 62, 98
CN 28
GC Brand....04, 30, 42, 44, 52, 63, 85, 88
Gemini …….….........….……crerrrrcacorescces 04, 85
General Electric ..............—— 57 NUMBERED
General Instruments keys —
. 01, 02, 03, 04, 34, 55, 83, 85, 91, 93, 95
Hamlin........... 14, 15, 28, 41, 97, 100, 102
Hitachi eee 31, 79
Jerrold
. 01, 02, 03, 04, 34, 55, 83, 85, 91, 93, 95 DISPLAY/
Macom ........... e ecasacoooconeo recaer 0e 31, 79 ENTER
Magnavox ..............e.eerenmecccor neo 25, 26
Matsushita ........................e.... 16, 17, 101
Movietime ...29, 32, 38, 39, 40, 42, 44, 88
NS arena ra O 32, 38, 40
OAK aan 10, 11, 46, 99
Panasonic ............... ec... 16, 17, 101
PRiIlIps ...............eerciceno 13, 20, 23, 24, 96
Pioneer .............._-emeieanenoronereo 05, 06, 78
Pulser.......... 04, 30, 42, 44, 52, 63, 85, 88
Radio Shack .......................e.xesesceeereees 44
BCA ec csoooourcac ananas ses rerennennen ce 16, 17, 101 .
ACB 44,51, 88 Universal Remote Control Setup
egal iri tee nee ,
Regency ...................niieeereniii eee 28 Find your TV or Cable Box Brand Code Number
Rembran ................. 29, 32, 39, 42, 44, 88 from the chart at left.
Salor&aacute; ........... e. mesexeiererrzerenre eee 68, 72
Samsung ...........w. e... 32, 40, 42, 78, 94
Scientific Atlanta ..... 08, 09, 56, 61, 87, 90 TV cav Hold down TV or CATV.
Sheritech ......................ereeeee nenas 27 0 or 0 Use the NUMBERED keys
SL Marx ………….……ceeses 32, 40, 42, 78, 94 to enter your TV or Cable
Spucer peeunonneroncaar rn renereorececaene 16, 17, 101 Box Brand code number.
70430, 32. 40, 42, 44, 52, 63, 78, 85, 88, 94 - For code numbers 100 or greater, first push the 100 key. Then,
SYIVANIE een EEE 19 enter the remaining digit. E.g. for 102, push 100, then push 2.
Teknika ..............rr.e....eeeneareconcecer eee 74
Telecaption e. ..._...= eee. 77, 92
Teleview ee 32, 40, 42, 78, 94 Try each of the functions on page 29.
Texscan ............erereiei eee Dee re 18, 19 вол
pere terne : &laquo; Due to changes in infra-red commands used by some
TOCOM ............... 01, 33, 34, 42, 48, 49, 91 manufacturers, some TV or Cable Box brands are listed
Toshiba ..............r.+.eeeeeneeneo ene 36 more than once. If your TV or Cable Box does not respond
Uniden Satellite 65, 69 to the first code, please try entering the next code.
[87111 01, 29, 44, 88, 91
Universal................. 42, 43, 44, 52, 63, 88
Viewstar ...... 13, 20, 22, 26, 40, 58, 62, 98
Videoway ...........——...—..—e ee 07, 23, 50 + Please repeat the TV/Cable Box Set Up procedure
Vid Tech rn 64 и N when you replace the remote's batteries.
Мег с, 64 NOTES) &deg; The remote control is designed to control the brands listed.
E ts However, it will not operate all TVs or Cable Boxes made by
Zenith corer, 07, 23, 50 NA these manufacturers. If you get no results, your particular
product brand cannot be controlled by this remote control.
28
Using the Universal Remote Control
Once the remote control has been properly set up, you can select VCR, TV, or
CATV mode depending on which functions you wish to control.
VCR Tv cav Push VCR or TV or CATV on the remote control to
0 or 0 or 0 select the desired mode.
(See below for the controllable functions of each mode.)
NOTE:
In TV or CATV mode, it may be necessary to push DISPLAY/ENTER
after pushing NUMBERED keys for channel selection.
VCR Mode TV Mode CATV Mode
In VCR mode, the following In TV mode, the following In CATV mode, the following buttons
buttons are available. buttons are available. are available.
VCR IV CATV
All function buttons. POWER, INPUT, NUMBERED keys, POWER, NUMBERED keys,
DISPLAY/ENTER/, DISPLAY/ENTER, CH UP/DOWN
IV CH UP/DOWN, VOL UP/DOWN TV
VOL UP/DOWN JV
&copy; VCR VOL UP/DOWN
VCR/TV, PLAY, STOP, FF, REW, VCR
SPEED COUNTER RESET UE VCR/TV, PLAY, STOP, FF, REW, PAUSE,
ZEROM MIN. SLOW, REC, SAP/Hi-Fi, SPEED,
COUNTER RESET, ZERO/1 MIN.
OO0( OO0( СООО
INPUT
INPUT
&quot;ОО 5
—O
ОО
UU UU
Котто * Some TV and Cable Box brands require you to turn on the power manually.
O7 “ Not all functions listed may be controlled by this remote.
29
=
о
=
&reg;
о
=
О
oD
3
=
о
| | Special VCR Features
chock list before you begin.
O Ali connections are made.
(See pages 6-9.)
E] vCRis Plugged in.
[) TV is turned on and set to the VCR
channel (CH3 or CHA).
STOP/EJECT
SES
0:00 &copy; &copy; OID
03
50
501
30
CHO &copy; &copy; OW |
|
4
С
o
&copy;,
&copy;
|
”
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature is used to keep children from
operating the VCR.
Hold down STOP/EJECT on
STOMEJECT the VCR for 7 seconds while
in Stop or Power OFF mode.
To Cancel the VCR Lock feature,
hold down STOP/EJECT on the
STOR/EJECT
VCR for 7 seconds again while
&copy; in Stop or Power OFF mode.
VCR LOCK ACTIVATED
VCR LOCK OFF
- VCR Lock mode is cancelled automatically
after 24 hours as long as the clock is set.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
D o
Push MENU to display
the menu.
Push AV to select
A
0) &laquo;ES&raquo; “SET UP VOR” and
then push D to display
SET UP VCR
SET CLOCK
SET UP CHANNEL
IDIOMA / LANGUE: ENGLISH
SELECT :4 Y KEY
SET &gt;= K
EY
| END ‘MENU KEY
the “SET UP VCR” screen.
9) a Push AV to select
&gt; “BEEPER,” and then
E&raquo; push &gt; to select “ON”
У or “OFF.”
fr —
==. SET UP VCR ------
REPEAT PLAY : ON
eS) : ON
SELECT :4 Y KEY
SET &gt; KEY
| END :MENU KEY
Push MENU twice to exit
this screen.
Before Requesting Service
&copy; Check the following points once again if you are having trouble with your VCR.
Power Correction
No power... - Completely insert the Power Plug into an AC outlet.
* Set the POWER button to ON.
Recording &amp; Playback Correction
TV program cannot be recorded... * Check connections between VCR, external antenna, and your TV.
* Маке sure your antenna system (CATV or TV) is connected
correctly. (To Replace Channels in Memory [P.14])
- Make sure that the record tab is intact on the cassette. (P.5)
Timer recording cannot be performed...
Set the recording start/stop times correctly. (P.18)
Make sure that the POWER button is set to OFF. (P.18)
Timer recording may not be performed or continued if a power
interruption of more than 1 minute occurs before or during, a
Timer Recording, even if power resumes thereafter,
There is no playback picture, or the playback Select channel 3 or 4 on the TV to match the Channel 3/4 switch
picture is noisy or contains streaks. located on the rear panel of the VCR. (P.6)
Set the VCR/TV selector to “VCR.”
Check that channel 3 or 4 of the TV is properly adjusted.
Adjust the TRACKING control in either direction. (P.16)
Special effects playback, picture may contain * Set the TV's Vertical Hold Control to “MANUAL” and then adjust it.
some vertical jitter when using a TV with an
Automatic Vertical Hold Control...
VCR can't be controlled... - Make sure that VCR LOCK is set to off. (P.30)
Remote Control Correction
VCR cannot be remote controlled... * Aim the Remote Control directly at the remote sensor on the
VCR. (P.10)
Avoid all obstacles which may interfere with the signal path.
Inspect the remote batteries for possible replacement. {P.4)
Make sure that VCR LOCK is set to off. (P.30)
Exposing the VCR remote sensor to direct fluorescent or outdoor
light may cause signal interference.
The MENU and PROG buttons can't be used. * Push the VCR button to select VCR mode. (P.29)
Miscellaneous Correction |
Set the VCR/TV selector to “TV”, (P.17)
Programs cannot be viewed on TV...
Video cassette cannot be inserted... Insert cassette with window side up and the record tab facing you.
+
Video cassette cannot be removed... Completely insert the Power Plug into an AC wall outlet.
Video cassette ejects when a recording is started
or the power is turned off for timer recording...
Make sure the record tab is intact on the cassette. (P.5)
In Stop mode, the motor (CYLINDER) continues To enable the quick play mechanism, the cylinder will rotate for
to rotate... about 5 minutes. This reduces response time from Stop to Play
mode from Play to Rewind Search mode.
The top of the playback picture waves back and Because the VCR playback signal is not as stable as an off-the-air
torth excessively... TV signal, the top of your TV screen may be bent or unstable
during playback. To solve this problem, slowly turn the horizontal
hold control on your TV to correct the wavy picture. If your TV does
not have a horizontal hold control or adjusting the control does not
help, please contact your local TV service center,
If you cannot resolve your problem, please call the Customer Satisfaction Center for
product assistance at 201-348-9090.
To locate an authorized servicenter, please call toll free 1-800-545-2672.
О
=i
m)
D
=
3
=
&copy;
pe)
=
&laquo;y
ый
о
=
31
Service Center List
PRODUCT INFORMATION &laquo; OPERATION ASSISTANCE &laquo; LITERATURE REQUESTS &raquo; DEALER LOCATIONS
Customer Service Center 2F-3, One Panasonic Way, Secaucus, NJ 07094 (Headquarters)
201-348-9090 (9:00am-8:00pm Monday-Friday, EST)
ACCESSORY PURCHASES
Panasonic Services Company 20421 84th Avenue South Kent, WA 98032
(6 am to 6 pm Monday - Friday ; 6 am to 10:30 am Saturday ; PST)
(Visa, Mastercard, Discover card, American Express, Check)
AUTHORIZED SERVICENTERS * PARTS DISTRIBUTOR LOCATIONS
To locate an independent authorized servicenter or parts distributor in your area,
within the USA dial toll free 1-800-545-2672, 24 hours a day, 7 days a week.
PRODUCT REPAIRS
CALIFORNIA
6550 Katella Avenue
Cypress, CA 90630
Phone (714) 373-7426
Fax (714) 894-8534
800 Dubuque Avenue
S. San Francisco, CA 84080
Phone (415) 871-6373
Fax (415) 871-6840
20201 Sherman Way
Suite 102
Canoga Park, CA 91306
Phone (818) 709-1775
Fax (818) 709-2165
3878 Ruffin Road
Suite A
San Diego, CA 92123
Phone (619) 560-9200
Fax (619) 560-1831
COLORADO
1640 South Abilene Suite D
Aurora, CO 80012
Phone (303) 752-2024
Fax (303) 752-0610
FLORIDA
3700 North 29th Avenue
Suite 102
Hollywood, FL 33020
Phone (954) 925-2880
Fax(954) 925-5224
4710 Eisenhower Boulevard
Suite A1
Tampa, FL 33634
Phone (813) 884-4746
Fax (813) 886-4564
REPAIR INQUIRIES
EAST (PCE)
2221 Cabot Boulevard West
Suite A
Langhorne, PA 19047
Phone (215) 741-0676
Fax (215) 750-6492
Covers:
CT, DE, ME, MD, MA, NH, NJ,
NY, PA, Rl, VT, VA, DC, wv
32
Factory Servicenters
GEORGIA
8655 Roswell Road
Suite 100
Atlanta, GA 30350
Phone (770) 518-6301
Fax (770) 518-6306
HAWAI
99-853 Iwaiwa Street
Aiea, Hawaii 96701
Phone (808) 488-4369
Fax (808) 486-4369
ILLINOIS
1703 North Randall Road *
Elgin, IL 60123
“12:30 to 4:30, Mon-Fri&quot;
Phone (847) 468-5464
Fax (B47) 468-5465
9060 Golf Road
Niles, IL 60714
Phone (847) 608-1010
Fax (847) 299-1710
MARYLAND
Sulphur Springs
Business Park
1638 Sulphur Springs Road
Baltimore, MD 21227
Phone (410) 242-2607
Fax (410) 247-3047
MASSACHUSETTS
60 Glacier Drive, Suite G
Westwood, MA 02090
Phone (617) 329-4280
Fax (617) 329-0586
* pick-up/drop-off only
MICHIGAN
37048 Van Dyke Avenue
Sterling Heights, MI 48312
Phone (810) 939-2060
Fax (810) 939-2638
MINNESOTA
7850-12th Avenue South
Airport Business Center
Bloomington, MN 55425
Phone (612) 854-8624
Fax (612) 854-2089
OHIO
2236 Waycross Road
Cincinnati, OH 45240
Phone (513) 851-4180
Fax (513) 851-8443
PENNSYLVANIA
2221 Cabot Boulevard West
Suite B
Langhorne, Pa 19047
Phone (215) 741-0661
Fax (215) 741-0521
Chartiers Valley Shopping
Center
1025 Washington Pike
Bridgeville, PA 15017
Phone (412) 257-4522
Fax (412) 257-4650
TENNESSEE
919-8th Avenue South
Nashville, TN 37203
Phone (615) 244-4434
Fax (615) 244-6713
Regional Customer Care Department
EAST (PCE)
1225 Northbrook Parkway
Suite 2-390
Suwanee, GA 30174
Phone (770) 338-6860
Fax (770) 338-6548
Covers:
AL, FL, GA, MS, NC, SC, TN
CENTRAL (PCC)
1707 North Randall Road
Elgin, IL 60123
Phone (847) 468-5530
Fax (847) 468-5528
Covers:
AR, IL, IN, 1A, KS, KY, LA,
MI, MN, MO, NE, ND, OK,
SD, TX, WI, OH
TEXAS
7482 Harwin Drive
Houston, TX 77036
Phone (713) 781-1528
Fax (713) 781-0643
13615 Welch Road
Suite 101
Farmers Branch, TX 75244
Phone (972) 385-1975
Fax (972) 960-7626
WASHINGTON
20425-84th Avenue South
Kent, WA 98032
Phone (206) 872-7922
Fax (206) 872-0918
Service in Puerto Rico
Matsushita Electric
of Puerto Rico, Inc.
Panasonic Sales Company/
Factory Servicenter
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industria! Park
Carolina, Puerto Rico 00885
Phone (787) 750-4300
Fax (787) 768-2910
WEST (PCW)
6550 Katella Avenue
Cypress, CA 90630
Phone (714) 373-7440
Fax (714) 373-7447
Covers:
AK, AZ, CA, CO, ID, MT, NV,
NM, OR, UT, WA, WY, HI
As of December &quot;96
Warranty
Panasonic Consumer Electronics Company, Panasonic Sales Company,
Division of Matsushita Electric Corporation Division of Matsushita Electric of Puerto Rico, Inc.
of America, AVE. 65 de Infanteria, Km. 9.5
One Panasonic Way San Gabriel Industrial Park
Secaucus, New Jersey 07094 Carolina, Puerto Rico 00985
PANASONIC Video Products
Limited Warranty
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the Warrantor™) will
repair this product with new or refurbished parts, free of charge, in the USA or Puerto Rico, in the event of a defect in
materials or workmanship as follows (all time pertods commence from the date of the original purchase):
PRODUCT PARTS
CAMCORDER ONE (1) YEAR, EXCEPT CCD IMAGE SENSOR NINETY (90) DAYS
CCD IMAGE SENSOR - SIX (6) MONTHS NINETY (90) DAYS
VCR ONE (1) YEAR NINETY (90) DAYS
A/V MIXER ONE (1) YEAR NINETY (90) DAYS
MONITOR-VCR ONE (1) YEAR, EXCEPT CRT NINETY (90) DAYS
CRT - TWO (2) YEARS CRT LABOR ONE (1) YEAR
SECOND YEAR CUSTOMER
PAYS ALL LABOR CHARGES
Monitor-VCR In-home or carry-in Service: 19” (diagonal) CRT / LCD and Larger
Monitor-VCR Carry-in Service: 18” (diagonal) CRT / LCD and smaller
Batteries (if included) - New rechargeable batteries in exchange for defective rechargeable batterics for ten (10) days from the date of
original purchase. Non-rechargeable batteries are not warranted.
Tape (if includes) - New video cassette tape in exchange for a defective video cassette tape for five (5) days from the date of the original
purchase.
In-home, carry-in or mail-in service, as applicable, in the USA can be obtained during the warranty period by contacting a Panasonic
Services Company (PASC) Factory Servicenter listed in the Service Directory. Or call 1-800-545-2672, toll free, to locate an authorized
PASC Servicenter. Carry-in or mail-in service in Puerto Rico can be obtained during the warranty period by calling the Panasonic Sales
Company telephone number listed in the Servicenter Directory.
This warranty is extended only to the original purchaser. A purchase receipt or other proof of the date of the original purchase is requires
before warranty service is rendered.
This warranty only covers failures due to defects in materials and workmanship which occur during normal use and does not cover normal
maintenance, including, but not limited to, video and audio head cleaning. The warranty does not cover damage which occurs in shipment, or
failures which are caused products not supplied by the warrantor, or failures which result from accident, misuse, abuse, neglect, mishandling,
misapplication, alteration. modification, faulty installation, set-up adjustments, improper antenna, inadequate signal pickup, maladjustment
of consumer controls, improper operation, power line surge, lightning damage, commercial use such as hotel, office, restaurant, or other
business or rental use of the product, or serviced by anyone other than a PASC Factory Servicenter or an authorized PASC Servicenter, or
damage that is attributable to acts of God.
LIMITS AND EXCLUSION
There are no express warranties except as listed above,
THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT
LIMITATION, DAMAGE TO TAPES) RESULTING FROM THE USE OF THIS PRODUCTS, OR ARISING OUT OF ANY BREACH
OF THE WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty
lasts, so the above exclusions or limitations may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
If a problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the problem is not
handled to your satisfaction, then write to the Customer Satisfaction Center at the Panasonic Consumer Electronics Company address above.
SERVICE CALLS WHICH DO NOT INVOLYE DEFECTIVE MATERIALS OR WORKMANSHIP AS DETERMINED BY THE
WARRANTOR, IN ITS SOLE DISCRETION, ARE NOT COVERED. COSTS OF SUCH SERVICE CALLS ARE THE
RESPONSIBILITY OF THE PURCHASER.
warvid 8/20/96
33
О
pars
=
1
=
=]
—
e,
== 4
=
Q
+
O
=
Spanish Quick Use Guide/Guia para rapida consulta
Para fijar el idioma , canal y reloj
xg | Encienda el televisor y la (Caso 1) C bar si la h t&aacute; filad
, aso 1 omprobar si la nora esta jada
1) videograbadora. OCT correctamente y luego oprimir
CH &Agrave; para terminar la fijaci&oacute;n.
Sintonice el televisor al canal de salida de la Si la hora y la hora veraniega es
videograbadora (el mismo canal que ha fijado en incorrecta, por favor siga los
la parte trasera de la videograbadora; canal 3 o 4). siguientes pasos:
Raras veces, en caso de que ud. vive cerca de
CH Oprimir CH A para SELECT LANGUAGE dos zonas con hora diferente, el aparato puede
A+ | elegir el idioma de la elegir un canal PBS con diferente hora de su
&acirc; pantalla en ingl&eacute;s. PUSH VCR CH 4: ENGLISH zona. En este caso, haga los siguientes pasos:
PULSE YCR CH Y: ESPA&Ntilde;OL
о вое ..
Oprimir CH Y para |aee. vorTv —: Francais I Tome nota del canal que est&aacute; fijado en la pantalla y
3 elegir el idioma de la salga desde este modo oprimiendo el bot&oacute;n CH 4.
Y 7 | pantalla en espa&ntilde;ol. 2 Anule este canal desde los canales memorizados
о . en la combinacion de VCR/TV.
Oprimir VCR/TV para
VORATV | ii de | 3 Oprima el bot&oacute;n MENU para que aparezca la
elegir el idioma de la pantalla del MENU
pantalla en franc&eacute;s. с о
“ Ud. podr&aacute; fijar tambi&eacute;n usando los mismos botones que est&aacute;n 4 Oprimir AY para elegir “FIJAR RELOJ&quot; y luego
ubicados en la videograbadora. oprimir P para que aparezca la pantalla de “FIJAR
* La videograbadora debe conectarse a una antena o RELOJ.”
caja de TV por cable. 5 Oprimir AY para elegir &quot;REGLAGE AUTO” y luego
oprimir &raquo; para que aparezca la pantalla de
2] Oprimir AY para ARTES REGLAGE CANAL/HORLOGE AUTOMATIQUE.
E elegir, y luego oprimir VCR CABLE/USSS TV 6 Oprimir CH A PARA INICIR LA FIJACI&Oacute;N
v &raquo; para fijar su AUTOMATICA.
conexi&oacute;n. * Si ud, esta usando una caja de TV por cable y
E tiene muchos canales PBS, sintonize la caja de
* Si ud. ha elegido CABLE/DSS TERM [NAR : MENU TV por cable a un canal PBS diferente e intente
P VCR&raquo; TV, continue al paso 5. la fijaci&oacute;n autom&aacute;tica otravez.
Si no, siga al paso 7.
— — Si aparece la pantalla anterior,
(5) cer AV pe &Eacute; CABLE /DSSPVCHRTV Caso 2 la fijaci&oacute;n autom&aacute;tica del reloj
&laquo;s&gt;) | elegir el canal de no es disponible en su zona.
salida de la caja de TV | sativa eg? E/0SS Por favor fije la hora del reloj
por cable 0 el receptor | ra Ye manualmente.
ar ie oprimir | FAA ew
* Si es necesario, consulte su manual de la caja de TV por cable.
* Si ud. est&aacute; usando los terminales de audio/video para la
conexi&oacute;n de la caja de TV por cable, elija y fije a “SALIDA DE
VIDEO&quot; para el canal de salida.
&copy; Encienda la caja de TV por cable y fije la caja Ajuste del relo)
de TV por cable al canal PBS de su zona.
1 Oprimir MENU para eee MENU ---=====- |
imi ue aparezca la e
Oprimir CH A para q ,
7 of iniciar la fijaci&oacute;n FIAGICH AUTO. (GAIRELO) pantalla del menu. LANGUE LANGUAGE: ESPANOL
omatica de lo ANTENA Y 61 ESTA USANDO A, , ELEGIA:4 Y
UNA CAJA DE TV POR CABLE 2 Oprimir AY para elegir FLAR Cb
canales. E co Fe ‘FIJAR RELOJ&quot;yluego — ‹
[POR FAVOR OPAIMIR CH UP | OPprimir &gt; pare cell d -x47- FIJAR RELOJ =-----
* Aparace las siguientes informaciones: aparezca la pantara de Mu
“AUTOPROGRAMACION EN PROCESO” FIJAR RELOJ. Cl VERDA
“FIJACI&Oacute;N AUTOMATICA DEL RELOJ EN PROCESO&quot; be ,
3 Oprimir AY y &gt; para ELAR &gt; NU
о
elegir y fijar la hora y
el da ee
UC 1997 54 12:00PN
о RANO:ACT
12/25/1995 TUE 12:00PH 4 Oprimir MENU dos rice
&iquest;HORA МЕРАМИ ЕСА ACT, FUACION A TICA veces para Iniciar a
AL FTJADO + RE funcionar el reloj y salir FIJAR :4&gt;
E IJACION AUTOMATICA desde este modo. INICIAR : MENU
COMPLETO PARA FLAR EL RELOJ
TERMINAR : PULSE CH UP |
34
Operaciones basicas para la Programaci&oacute;n f&aacute;cil para la
reproducci&oacute;n grabaci&oacute;n con temporizador
———— | Introducir una cinta
Esta indicaci&oacute;n aparece en &lt; Oprimir PROG para |- 9 PROGEAMACI&Oacute;N --
la pantalla multifuncional. NAS O que aparezca la VCR Plus+
pantalla “FIJAR UE ЧЕ
— PROGRAMACI&Oacute;N” |
Oprimir PLAY en el control remoto o ANTEC
en la videograbadora para comenzar — (_TERMINAR: PROG J
a reproducir. | Oprimir AY (TND
&laquo;ED&raquo; | para elegi Jam
Oprimir STOP en el control remoto v | TEMPORIZADOR&quot; | N ~~ SLP
o en la videograbadora para parar y luego oprimir &raquo;
la reproducci&oacute;n. para exhibir la fine”
— pantalla de la \ | /
(4) STOREJECT Oprimir ECT para programaci&oacute;n.
expuisa * Si ya existe una programaci&oacute;n memorizada, oprima
AY y D para elegir un n&uacute;mero sin programaci&oacute;n.
Para buscar una escena en particular durante
la reproduction Oprimir AY y P para elegir y fijar
+ Oprimir REW o FF &laquo;E&raquo; uno de los siguientes:
| durante la reproduccion v | - 1-31 =Grabaci&oacute;n de una sola vez
para buscar una escena. * DIARIO =&Aacute; una misma hora LUN-VIE
N ; . . + SEMANAL =Una vez a la semana a una
* La velocidad de b&uacute;squeda es a 9 veces m&aacute;s r&aacute;pida que la velocidad misma hora
normal para el modo SP y 27 veces m&aacute;s r&aacute;pida para el mode SLP. Fecha de h
echa de hoy
Ejemplo |
e SEMANALISAB)+— 7 — 89-31
Operaciones b&aacute;sicas para la
lie) SEMANAL A/Y Orden para elegir |
2
. ‘ {LUN}
Introducir una cinta KN ;
con la leng&uuml;eta. TN 'SEMANAL(DOM) —— DIARIA —— &amp;=+++*
Lol 1]
- La videograbadora se На * Oprimir AY y para elegir y fijar
enciende autom&aacute;ticamente. &gt; las fijaciones a la derecha.
2] Oprimir CH A/Y [Farm CAO Y Fijaciones:
3 lolas teclas * Hora de inicio — * Hora de parada
num&eacute;ricas para (ESTEREO) , Canal o LINEA para una fuente externa .
v elegir el canal. MONO 4 * Velecidad de la cinta (SP, LP, SLP).
* Para grabar desde una fuente Para hacer m&aacute;s programaciones
externa, oprimir CH 4/Y o Prog
Oprimir &raquo; sucesivamente para avanzar u 4 para retroceder
INPUT para seleccionar “LINEA1” o “LINEA2.&quot; hasta el paso que desea corregir.
seep | Oprimir SPEED para В — &gt; —
O cambiar la velocidad $2 Oprimir PROG P FE NIC PARADA CA VEL
4 x 1 9 12: SF
de la cinta O) |para terminar la | em es
* SP = Reproducci&oacute;n est&aacute;ndar, programaci&oacute;n. E LD IIIT
LP = Larga duraci&oacute;n, , CANCELAR :ADD/OLT
SLP = Superlarga duraci&oacute;n. Para hacer m&aacute;s programaciones ELEGIR 18:4 &yen;
Oprimir AY y &raquo; para elegir y fijar un | TERMI NAR:PROG |)
Oprimir REC/TIME en el control remoto o ingly de Programa en blanco y
. videograbadora para empezar a grabar. uego repita los pasos 3 y 4.
TT |- Oprimir PAUSE para hacer una
pausa en la grabaci&oacute;n en progreso. 6) Oprimir PROG para salir &copy;
/ Grabaci&oacute;n de un toque (OTR) &gt; O desde este modo y volver &gt;
La videograbadora termina la grabaci&oacute;n a una hora programada. a la pantalla normal. Ф
En el paso 4, oprimir repetidamente REC/TIME para —
fijar el tiempo de grabaci&oacute;n. Cada presi&oacute;n cambiar&aacute; la =&gt; | Oprimir POWER у Pantalla &gt;
hora de parada como demuestra al siguiente. apaque el aparato multifuncional 9
Qu moe para la grabaci&ocirc;n &lt; =
4:00 4— 3:00 4— 2:00 4—1:30 y con temporizador. UE D
- Si la fuente de la grabaci&ocirc;n es una [лай
. caja de TV por cable, aseg&uacute;rese de e
5) Oprimir STOP para parar que la caja de TV por cable est&eacute; =
la grabaci&oacute;n. encendido y est&eacute; sintonizado al canal
* U oprimir STOP/EJECT en la videograbadora. que desea grabar.
35
Quick Use Guide
This guide should oniy be used once you are familiar with the operations inside this manual. If you have any
problems or need more information, please refer to the page listed.
Clock Reset (page 14)
A
....... MENU --------- “я =--&lt;-- SET CLOCK +-++--- A
E т AUTO SET &gt;
SET UP CHA 4 ce › 4 &raquo;
1D IOMA LANGUE: ENGLI SH co o
(MENU) чу
| mT Le green: Le M
Display END :MENU KEY Select END — :MENU KEY Sel
the menu “SET CLOCK” &quot;MANUAL SET
MANUAL SET”
SELECT HOUR
SELECT 4 9 KEY Start the clock &amp;
END MENU KEY Set the clock exit this mode
Playback a Tape (page 16)
Insert a tape At VCR
Turn TV on 7 q | — STOP/EJECT
Select VCR И q D A Tel (5)
Channel 3/4 Dur Viscarion
Start playback Stop playback Eject tape
Make a Recording (page 17)
Insert a tape
Turn TV on with Record Tab &copy; SPEED Зы
Select VCR $ [STOP
Channel 3/4 у q ) &Eacute; О &amp; SLP &copy;
UT N
— Select channel Select speed Start recording Stop recording
I.
A SET PROGRAM ----- AJE|, START STOP CH
VCR Plus+ PROGRAM Td ____SLP
I (PROG) | MEA [SELECT START DATE
Display the SET ie KEY Select SET&raquo; Re o |
program screen END PROG KEY “TIMER PROGRAM&quot; END :PROG KEY Enter timer information
P DT START STOP CH SPD
1DAY 9:00412:004 08 SP
2 -- 1 ie mm =.
Bo === ei m m
4 me males htm Ce ==
CANCEL :ADO/DLT KEY
SELECT 1-8:4 Y KEY
ENTER :&raquo; KEY
END :PROG KEY
Once to finish the program,
twice to exit this mode
Turn VCR off
to set the timer
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico, Inc. (*PSC”)
Ave, 65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
Printed in Japan
VQTS3320 (A)
">
Key features

Built-in head cleaner
Auto Clock Set
181-CH TV/CATV Tuner
VHS Hi-Fi Stereo System
Timer Recording
VCR Plus+ Recording
Multi-Brand Control
Special effects playback
Frequently asked questions

The maximum recording time depends on the tape speed and the type of tape used. For example, a T60 tape can record up to 4 hours in standard play, 2 hours in long play, or 1 hour in super long play.
Yes, you can record one program while watching another. Push the VCR/TV button while recording is in progress to turn off the VCR indicator in the Multi Function Display. You can then use the TV channel controls to select another program.
The VCR Plus+ feature allows you to program recordings using a code that is printed in TV listings. To use VCR Plus+, you must first set up the feature using the instructions in the manual.
You can set the clock manually or use the Auto Clock Set feature. For Auto Clock Set, turn on the VCR and set it to the PBS channel in your time zone. The VCR will automatically set the clock to the correct time.