OSD (On-Screen-Display) Controls. NEC X462UN-TMX9P, 5 x 5 - X461UN Display Set, X462UN-TMX4P, 4 x 4 - X461UN Display Set, 10 x 10 - X461UN Display Set, 2 x 2 - X461UN Display Set, X462UNV, 3 x 3 - X461UN Display Set, MultiSync® X461UNV

Add to My manuals
42 Pages

advertisement

OSD (On-Screen-Display) Controls. NEC X462UN-TMX9P, 5 x 5 - X461UN Display Set, X462UN-TMX4P, 4 x 4 - X461UN Display Set, 10 x 10 - X461UN Display Set, 2 x 2 - X461UN Display Set, X462UNV, 3 x 3 - X461UN Display Set, MultiSync® X461UNV | Manualzz

OSD (On-Screen-Display) Controls

NOTE: Some functions may not be available depending on the model or optional equipment.

Input source

Main Menu Icons

Main Menu Item

Sub Menu

PICTURE MODE

Select

70

50

50

50

50

50

THANK YOU FOR SAVING

THE ENVIRONMENT.

CARBON FOOTPRINT 86.0 %

Goto Adjustment Return Close

Key Guide

Adjustment Settings

Press UP or DOWN button to select sub-menu.

Press SET.

Press UP or DOWN,

PLUS or MINUS to select the function or setting to be adjusted.

Press MENU or EXIT.

Remote Control

Press UP or DOWN button to select.

Press INPUT button to decide.

Press UP or DOWN, PLUS or MINUS button to select.

Press EXIT

Control Panel

OSD screen

English-19

Setting

PICTURE

BRIGHTNESS

Default

CONTRAST

Adjusts the overall image and background brightness. Press + or - to adjust.

Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot be changed.

Adjusts the image brightness in relationship to the background. Press + or - to adjust.

Note: When sRGB is selected in picture mode, this function cannot be changed.

Adjusts the crispness of the image. Press + or - to adjust.

70

50

SHARPNESS

BLACK LEVEL

50* 2

50

TINT

Adjusts the image brightness in relationship to the background. Press + or - to adjust.

Note: When sRGB is selected in picture mode, this function cannot be changed.

Adjusts the tint of the screen. Press + or - to adjust.

Note: When sRGB is selected in picture mode, this function cannot be changed.

50

COLOR Adjusts the color depth of the screen. Press + or - to adjust.

Note: When sRGB is selected in picture mode, this function cannot be changed.

50* 2

COLOR TEMPERATURE Adjusts the color temperature of the entire screen. A low color temperature will make the screen reddish. A high color temperature will make the screen bluish. If TEMPERATURE needs further adjustment, the individual R/G/B levels of the white point can be adjusted. To adjust the R/G/B levels, CUSTOM must be showing as the COLOR TEMP selection.

Note: When sRGB is selected in picture mode, predefined 6500k is set so it cannot be changed.

When PROGRAMMABLE is selected in GAMMA SELECTION, this function cannot be changed.

COLOR CONTROL

GAMMA SELECTION

Adjusts the hue of the Red, Yellow, Green, Cyan, Blue, Magenta and Saturation.

Note: When sRGB is selected in picture mode, this function cannot be changed.

Select a display gamma for best picture quality.

Note: When sRGB is selected in picture mode, this function cannot be changed.

10000K

0

PROGRAMMABLE

(except sRGB setting)

NATIVE

2.2

Gamma correction is handled by the LCD panel.

Typical display gamma for use with a PC.

2.4

Good for video (TV, DVD, etc.)

S GAMMA

DICOM SIM.

Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of the image (S-Curve).

DICOM GSDF curve simulated for LCD type.

PROGRAMMABLE Gamma curve of the factory setting is installed.

A programmable gamma curve can be re-loaded using NEC optional software.

MOVIE SETTINGS

NOISE REDUCTION Adjusts the amount of noise reduction. Press + or - to adjust.

TV, VIDEO1, VIDEO2, S-VIDEO inputs only

FILM MODE

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only

Automatically senses the sources frame rate for optimal picture quality.

ADAPTIVE CONTRAST Sets the level of adjustment for dynamic contrast.

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only

6* 2

AUTO* 2

OFF

PICTURE MODE

PICTURE RESET

Selects picture mode, [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [AMBIENT1] or

[AMBIENT2]. See page 18.

Resets the following settings within the PICTURE menu back to factory setting:

BRIGHTNESS, CONTRAST, SHARPNESS, BLACK LEVEL, TINT, COLOR, COLOR

TEMPERATURE, COLOR CONTROL , GAMMA SELECTION, MOVIE SETTINGS.

STANDARD

-

ADJUST

AUTO SETUP

VGA, RGB/HV inputs only

AUTO ADJUST

VGA, RGB/HV inputs only

Automatically adjusts Screen Size, H position, V position, Clock, Clock Phase and White Level.

H Position, V Position and Clock Phase are adjusted automatically upon power on.

H POSITION

All inputs except DVI, HDMI, DPORT

V POSITION

All inputs except DVI, HDMI, DPORT

Controls the horizontal position of the image within the Display area of the LCD.

Press + to move right. Press - to move left.

Controls the vertical position of the image within the Display area of the LCD.

Press + to move up. Press - to move down.

CLOCK

VGA, RGB/HV inputs only

Press + to expand the width of the image on the right of the screen.

Press - to narrow the width of the image on the left.

CLOCK PHASE

VGA, RGB/HV, DVD/HD1, DVD/HD2, SCART inputs only

Adjusts the visual “noise” on the image.

*: The product you purchased may not have this feature.

English-20

-

-

-

-

-

OFF

*2: depends on signal input

H RESOLUTION

VGA, RGB/HV inputs only

V RESOLUTION

VGA, RGB/HV inputs only

Adjusts the horizontal size of the image.

Adjusts the vertical size of the image.

INPUT RESOLUTION

VGA, RGB/HV inputs only

If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. After selection, execute “AUTO SETUP” if required.

If no problem is detected, the only available option will be “AUTO”.

Select the aspect ratio of the screen image.

ZOOM MODE

All inputs except TV*

BASE ZOOM

16:9

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only

For input sources that have a 16:9 aspect ratio.

14:9

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only

For input sources that have a 14:9 aspect ratio.

DYNAMIC

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only

Expands 4:3 picture to fill the screen. Some of the image is lost due to expansion.

AUTO

-

-

-

CUSTOM

OFF

All inputs, except TV*

CUSTOM

All inputs, except TV*

ZOOM**

H ZOOM**

V ZOOM**

H POS**

V POS**

ASPECT

Selecting “OFF” will display the image in a 1 by 1 pixel format. (If the input resolution is higher than a 1360 x 768 resolution, the image will be scaled down to fit the screen.)

Displays an image as large as possible without changing the aspect ration.

Maintains the aspect ratio while zooming.

Amount of horizontal zoom. Can be adjusted for each BASE ZOOM setting.

Amount of vertical zoom. Can be adjusted for each BASE ZOOM setting.

Horizontal position. Can be adjusted for each BASE ZOOM setting.

Vertical position. Can be adjusted for each BASE ZOOM setting.

Selects picture aspect, [FULL], [NORMAL], [WIDE] and [ZOOM]. See page 17.

1.00

1.00

1.00

0%

0%

FULL

ADJUST RESET Resets the following settings within the ADJUST menu back to factory setting:

AUTO ADJUST, H POSITION, V POSITION, CLOCK, CLOCK PHASE, H RESOLUTION,

V RESOLUTION, ZOOM MODE, ASPECT.

AUDIO

BALANCE

(Not available)

TREBLE

(Not available)

BASS

(Not available)

PIP AUDIO

LINE OUT

SURROUND

(Not available)

AUDIO INPUT

Selects source of PIP audio.

Selecting “VARIABLE” enables control of the line out level with the VOLUME button.

Artificial surround sound.

Selects audio input source [IN1], [IN2], [IN3], [DPORT], [HDMI], [TV]*, [OPTION]*.

Resets “AUDIO” options back to factory settings.

AUDIO RESET

SCHEDULE

OFF TIMER Sets the monitor to power off after a length of time.

A time between 1 to 24 hours is available.

SCHEDULE SETTINGS Creates a working schedule for the monitor to use.

SCHEDULE LIST List of schedules.

-

-

-

MAIN AUDIO

FIXED

-

Depend on signal input

-

OFF

-

-

DATE & TIME

YEAR

MONTH

DAY

TIME

Sets the date, time, and daylight saving region. Date & time must be set in order for the

“SCHEDULE” function to operate. See page 27.

Configures the year for the real time clock.

Configures the month for the real-time clock.

Configures the day for the real-time clock.

Configures the time for the real-time clock.

DAYLIGHT SAVING Configures daylight savings on or off.

*: The product you purchased may not have this feature.

English-21

-

-

-

-

OFF

**: 16:9, 14:9, CUSTOM only

SCHEDULE RESET Resets the following settings within the SCHEDULE menu back to factory setting:

OFF TIMER, SCHEDULE SETTINGS.

PIP

KEEP PIP MODE

PIP MODE

OFF

PIP

POP

Allows the monitor to remain in “PIP” and “TEXT TICKER” mode after powering off.

When Power is returned, PIP and TEXT TICKER appear without having to enter the OSD.

Picture-in-Picture

OFF

PIP

POP

SIDE BY SIDE (ASPECT) SIDE BY SIDE ASPECT

SIDE BY SIDE (FULL) SIDE BY SIDE FULL

PIP SIZE Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.

SMALL

MIDDLE

LARGE

PIP POSITION

ASPECT

TEXT TICKER

MODE

POSITION

SIZE

BLEND

DETECT

FADE IN

Determines where the PIP appears on the screen.

Selects sub picture aspect, [FULL], [NORMAL], [WIDE] and [ZOOM]. See page 17.

Enables Text Ticker and allows you to set Horizontal or Vertical direction.

Selects the location of the Text Ticker on the screen.

Determines the size of the Text Ticker in relationship to the overall screen size.

Sets the transparency of the Text Ticker (0: transparent, 100: opaque).

Enables auto-detection of the Text Ticker.

Enables fade-in of the text ticker.

Selects sub picture input signal.

Resets PIP options back to factory settings except ASPECT and SUB INPUT.

SUB INPUT

PIP RESET

OSD

LANGUAGE

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

SVENSKA

РУССКИЙ

Select the language used by the OSD.

-

OFF

OFF

LARGE

X = 95, Y = 92

FULL

OFF

Depend on signal input

-

ENGLISH

(Depends on destination)

OSD TURN OFF

OSD POSITION

UP

DOWN

LEFT

RIGHT

Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.

Determines the location where the OSD appears on the screen.

30 Sec.

X = 128, Y = 225

English-22

INFORMATION OSD Selects whether the information OSD is displayed or not. The information OSD will be displayed when the input signal or source changes. The information OSD will also give a warning when there is no-signal or the signal is out-of range.

An interval between 3 to 10 seconds for the Information OSD to appear is available.

MONITOR INFORMATION Monitor Information.

CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).

Set the transparency level of the OSD.

OSD TRANSPARENCY

OFF

TYPE1

TYPE2

OSD ROTATION

LANDSCAPE

PORTRAIT

INPUT NAME

CLOSED CAPTION

VIDEO1, VIDEO2, S-VIDEO inputs only

Determines the OSD display direction between landscape and portrait.

Display the OSD with landscape mode.

Display the OSD with portrait mode.

You can create a name for the INPUT currently being used.

Max: 8 characters, including Space, A-Z, 0-9, and some symbols.

Activates closed captioning.

OSD RESET Resets the following settings within the OSD menu back to factory setting:

OSD TURN OFF, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY,

CLOSED CAPTION.

MULTI DISPLAY

MONITOR ID

IR CONTROL

NORMAL

PRIMARY

SECONDARY

LOCK

TILE MATRIX

H MONITORS

V MONITORS

POSITION

TILE COMP

ENABLE

POWER ON DELAY

POWER INDICATOR

Sets the monitor ID number from 1-100 and group ID from A-J.

NOTE: Group ID is made of multiple selections.

Selects the mode of the monitor for use with the infra-red remote control when using the

RS-232C daisy chain.

The monitor will be controlled normally using the remote controller.

Choose “PRIMARY” for the first monitor within an RS-232C daisy chain.

Choose “SECONDARY” for all subsequent monitors within an RS-232C daisy chain.

Prevents the monitor from being controlled by the wireless remote controller. To return to normal operation, press the “DISPLAY” button on the remote controller for 5 seconds.

Allows one image to be expanded and displayed over multiple screens (up to 100) through a distribution amplifier.

NOTE: Low resolution is not suitable for tiling to a large number of monitors. You can operate without a distribution amplifier at a lower number of screens.

Number of monitors arranged horizontally.

Number of monitors arranged vertically.

Select which section of the tiled image to be displayed on the monitor.

Turns the TILE COMP feature on.

Enables Tile Matrix.

Adjusts the delay time between being in “standby” mode and entering “power on” mode.

“POWER ON DELAY” can be set between 0 and 50 seconds.

Turns ON or OFF the LED located at the front of the monitor.

If “OFF” is selected, LED will not light when the LCD monitor is in active mode.

EXTERNAL CONTROL

CONTROL

LAN RESET

ID=ALL REPLY

MAC ADDRESS

Selects the control interface, RS-232C or LAN.

Resets the LAN settings.

When controlling the monitor externally, select if the communication command, which specifies destination equipment ID (ALL or GROUP ID), is replying or not. Use this function as necessary, if you connect the multiple monitors that are daisy-chained from secondly monitor by RS-232C.

Displays the MAC ADDRESS.

English-23

ON, 3 Sec.

1

1

1

NO

NO

0 Sec.

RS-232C

-

ON

-

-

TYPE2

LANDSCAPE

-

OFF

-

1

NORMAL

ON

LAN SETTING

DHCP

When you use this function, EXTERNAL CONTROL should be “LAN”.

NOTE: When changing the LAN SETTING, turn the monitor off and then back on.

After turning on the monitor, you need to wait several seconds until the LAN SETTING is applied.

Enabling this option automatically assigns an IP address to the monitor from your DHCP server.

Disabling this option allows you to register the IP address or subnet mask number obtained from your network administrator.

NOTE: Consult your network administrator for the IP address when “ENABLE” is selected for [DHCP].

DISABLE

Set your IP address of the network connected to the monitor when “DISABLE” is selected for [DHCP]. 192.168.0.10

IP ADDRESS

SUBNET MASK Set your subnet mask number of the network connected to the monitor when “DISABLE” is selected for [DHCP].

255.255.255.0

DEFAULT GATEWAY Set your default gateway of the network connected to the monitor when “DISABLE” is selected 192.168.0.1

for [DHCP].

DNS PRIMARY

DNS SECONDARY

SETTING COPY

Set your primary DNS settings of the network connected to the monitor.

Set your secondary DNS settings of the network connected to the monitor.

In a daisy chain scenario, select the OSD menu categories that you want to copy over to the other monitor. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C”.

This function resets to default when power is off. This function has a limit depending on the cable you use.

0.0.0.0

0.0.0.0

NO

COPY START

ALL INPUT

Select “YES” and press the SET button to start copying.

All input terminals settings are copied when you select this item. Default is off.

MULTI DISPLAY RESET Resets “MULTI DISPLAY” options back to factory settings.

DISPLAY PROTECTION

POWER SAVE

All inputs except for TV*

Sets how long the monitor waits to go into power save mode after the signal is lost.

Note: When connecting DVI, the video card might not stop sending the digital data even though the image might have disappeared. If this occurs the monitor will not switch into power management mode (standby mode).

ON

STANDBY MODE

HEAT STATUS

FAN CONTROL

SCREEN SAVER

GAMMA

BRIGHTNESS

Lowers power consumption.

Note: When in ECO STANDBY mode, DDC/CI does not function.

Displays status of the FAN, BRIGHTNESS and TEMPERATURE.

Cooling fan reduces the temperature of the display to protect from overheating.

If “AUTO” is selected, you can adjust the start temperature of the cooling fan and fan speed.

Use the SCREEN SAVER function to reduce the risk of Image Persistence.

The display gamma is changed and fixed when “ON” is selected.

The brightness is decreased when “ON” is selected.

NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.

MOTION The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) at user determined intervals. You can set interval time and zooming ratio.

This function is disabled when PIP, STILL, TEXT TICKER or TILE MATRIX are enabled.

SIDE BORDER COLOR Adjusts the color of the side borders when a 4:3 image is displayed.

Press + button, the bar will become lighter.

Press - button, the bar will become darker.

AUTO BRIGHTNESS

DPORT, DVI, VGA, RGB/HV inputs only

CHANGE SECURITY

PASSWORD

SECURITY LOCK

DDC/CI

Adjusts the brightness level according to the input signal.

NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.

Allows the security password to be changed.

The factory preset password is 0000.

Locks the security password.

ENABLE/DISABLE: Turns ON or OFF the two way communication and control of the monitor.

DISPLAY PROTECTION Resets the following settings within the DISPLAY PROTECTION menu back to factory setting:

RESET POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR,

AUTO BRIGHTNESS, DDC/CI.

*: The product you purchased may not have this feature.

ECO

STANDBY

-

AUTO

OFF

OFF

OFF

15

OFF

-

OFF

ENABLE

-

English-24

ADVANCED OPTION

INPUT DETECT

All inputs except for TV*

Selects the method of input detection the monitor uses when more than two input devices are connected.

NONE

FIRST DETECT

The Monitor will not search the other video input ports.

When the current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically.

The monitor will not look for other video signals while the current video source is present.

FIRST DETECT

LAST DETECT

VIDEO DETECT

CUSTOM DETECT

INPUT CHANGE

When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, the monitor will automatically switch to the new video source.

When current video input signal is not present, the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically.

DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over

DVI, VGA, RGB/HV. When DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO input signal is present the monitor will change and keep to the DVD/HD1, DVD/HD2, SCART,

VIDEO1, VIDEO2 or S-VIDEO input.

Set the priority of input signals.

When CUSTOM DETECT is selected, monitor searches listed inputs only.

Sets input change speed.

NOTE: When “QUICK” is selected, picture may be distorted when signal input is changed.

This function should be chosen after all adjustment options have been made for the input.

Manually compensates for image degradation caused from using a long cable.

NORMAL

LONG CABLE COMP

EQUALIZE

VGA, RGB/HV inputs only

POLE

PEAK

GAIN

OFFSET

SYNC TERMINATE

RGB/HV inputs only

Adjusts frequency.

Adjusts equalizing value.

Adjusts gain value.

Adjusts slice level of synchronized signal.

Selects the terminate resistance for matching the cable impedance.

OFF

0

0

0

0

HIGH

TERMINAL SETTING

DVI MODE

BNC MODE

SCART MODE

HDMI SIGNAL

Selects the kind of DVI-D equipment which is connected to the DVI input. Select “DVI-PC” when PC or other computer equipment is connected. Select “DVI-HD” when DVD player, which has DVI-D output, is connected.

Selects the kind of equipment which is connected to the BNC input.

RGB: Analog input

COMPONENT: Component

VIDEO:

Input mode for devices using SCART connectors.

RAW: Disable the expanded feature.

EXPAND: Expand image contrast and increase detail in the dark and bright areas.

SCAN CONVERSION

All inputs except VGA, RGB/HV

Selects the IP (Interlace to Progressive) conversion function.

Note: For DVI input “DVI-HD” needs to be enabled in the DVI mode menu.

Converts interlaced signals to progressive. This is the default setting.

PROGRESSIVE

INTERLACE Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of image retention.

*: The product you purchased may not have this feature.

DVI-PC

RGB

OFF

EXPAND

PROGRESSIVE

English-25

COLOR SYSTEM

VIDEO1, VIDEO2, S-VIDEO inputs only

The selected Color System depends on the video format of the input signal.

AUTO

NTSC

PAL

SECAM

Automatically chooses Color System setting based on input signal.

4.43 NTSC

PAL-60

SCAN MODE

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only

Some video formats may require different scanning modes in order to best display the image.

OVER SCAN Image size is larger than what can be displayed. The image edge will appear cropped.

Approximately 95% of the image will be shown on the screen.

Image size stays within the display area. The whole image is displayed on the screen.

UNDER SCAN

120 Hz

(Not available)

EDGE COMP

ENABLE

(X462UN only)

BRIGHTNESS

TYPE

Adjusts the brightness difference between the center and the edge of the screen.

This function is available when “ON” is selected.

Reduces the brightness in the center of the screen to allow for better consistency to the brightness at the edge of the screen. A reduction of approximately 10-30% can be selected to best match the surrounding environment and application.

Adjusts brightness curve from the center of the screen to the edge. Type 1 provides a gradual decrease while Type 2 and Type 3 provide a steeper decrease.

ADVANCED OPTION

RESET

Resets the following settings within the ADVANCED OPTION menu back to factory setting:

INPUT DETECT, INPUT CHANGE, LONG CABLE COMP, TERMINAL SETTING, SCAN

CONVERSION, COLOR SYSTEM, SCAN MODE.

FACTORY RESET Resets OSD options back to factory settings EXCEPT FOR: DATE & TIME, LANGUAGE,

OSD ROTATION, INPUT NAME, CHANGE SECURITY PASSWORD, SECURITY LOCK and

SECURITY PASSWORD.

*: The product you purchased may not have this feature.

AUTO

OVER SCAN

-

-

OFF

1

1

-

-

English-26

NOTE 1: CREATING A SCHEDULE

The schedule function allows the display to be set to power on and off at different times. Up to seven different schedules can be programmed.

To program the schedule:

1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons. Press the SET or the + button to enter the

Settings menu. Highlight the desired schedule number and press set. The box next to the number will turn yellow. The schedule can now be programmed.

2. Use the down button to highlight the hours setting in the ON time slot. Use the + and - buttons to set the hour. Use the up and down buttons to highlight the minutes setting. Use the + and - buttons to set the minutes. Set the OFF time in the same manner.

3. Use the up and down arrows to highlight INPUT. Use the + and - buttons to choose the input source. Use the up and down arrows to highlight PIC. MODE. Use the + and - buttons to choose the picture mode.

4. Use the down button to select a day on which the schedule will be enabled. Push the set button to enable. If the schedule is to be ran every day, choose EVERY DAY and press the SET button. The circle next to EVERY DAY will turn yellow. If a weekly schedule is desired, choose the days of the week using the up and down buttons and pressing SET to select. Then highlight the EVERY WEEK option and press SET.

5. After a schedule is programmed the remaining schedules can then be set. Press

MENU to leave the OSD or press EXIT to go back to the previous menu.

Note: If schedules are overlapping then the schedule with the highest number will have priority over the schedule with the lowest number. For example schedule #7 will have priority over schedule #1.

If selected input or picture mode is not available now, disable input or picture mode is shown in red.

DVI

SCHEDULE:

OFF TIMER

SCHEDULE SETTINGS

SCHEDULE LIST

DATE & TIME

SCHEDULE RESET RESET

Choose

SETTINGS:

(THU) JUN.18.2009 15:38

1 2 3 4 5 6 7

ON:

OFF:

INPUT:

PIC. MODE:

– – : – –

– – : – –

– – – –

– – – –

EVERY DAY

EVERY WEEK

! MON TUE WED THU

FRI SAT SUN

Mark Return Close

NOTE 2: IMAGE PERSISTENCE

Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Please set “SCREEN SAVER”, “DATE &TIME” and “SCHEDULE SETTINGS” functions to further reduce the risk of Image persistence.

For long life use as Public Display

Image Sticking of LCD Panel

When an LCD panel is operated continuously for long hours, a trace of electric charge remains near the electrode inside LCD, and residual or “ghost” image of previous image may be observed. (Image Persistence)

Image Persistence is not permanent, but when fixed image is displayed for long period, ionic impurities inside LCD are accumulated along the displayed image, and may be permanent. (Image Sticking)

Recommendations

To prevent Image Sticking, and for longer life usage of LCD, the following are recommended.

1. Fixed image should not be displayed for long period. Change fixed images after short intervals.

2. When not in use, please turn off the monitor by remote control, or use Power Management or use Schedule Functions.

3. Lower environmental temperatures prolong the lifespan of the monitor.

When Protective surface (glass, acrylic) is installed over the LCD surface, the LCD surface is located in an enclosed space, the monitor are stacked, utilize the temperature sensors inside monitor.

To reduce the environmental temperature, use the Cooling Fan, Screen Saver and Low Brightness.

4. Please use “Screen Saver Mode” of monitor.

English-27

advertisement

Related manuals