Hardware Installation. LG Electronics BE12LU38, BE12LU30

Add to My manuals
15 Pages

advertisement

Hardware Installation. LG Electronics BE12LU38, BE12LU30 | Manualzz

Installation

Hardware Installation

Connecting to computer NOTES

• Make sure you have a personal computer with an open USB port or eSATA port before connecting the drive to your computer.

• Power for all device should be turn off before attaching the cables.

eSATA cable or

USB 2.0 Converter cable

To AC wall outlet.

Connect the drive to the computer as shown in figure.

1. Connect the USB converter cable

(or eSATA cable) to the External Drive.

2. Connect the other end of the USB converter cable (or eSATA cable) to your computer.

3. Connect the AC adapter plug to the power connector at the rear of the drive.

Attach the AC adapter to the AC wall outlet.

4. Make sure the power switch is turned on.

When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the External Drive and install the software.

NOTES

• Please do not connect the AC adapter and USB 2.0 converter cable by any means other than specified above.

• For optimal performance, using the ‘USB Booster Program’ in the Software CD is recommended when you connect the USB cable.

• For optimal performance, using the SATA to eSATA Bracket is recommended when you connect your old Desktop PC.

6

advertisement

Related manuals

advertisement