Installing the Drive. LG GH24NS70, GH24LS70

Add to My manuals
13 Pages

The LG GH24LS70 Super Multi DVD Rewriter offers versatile disc read and write capabilities. With its Serial ATA interface, it seamlessly integrates into modern computer systems. The drive supports a wide range of disc formats, including CD-R/RW, DVD-R/RW, DVD-R DL, DVD+R/RW, DVD+R DL, and DVD-RAM. It features automatic buffer underrun error prevention technology for reliable data burning. Additionally, the drive supports LightScribe Direct Label Printing Technology, allowing you to create custom labels on compatible discs.

advertisement

Installing the Drive. LG GH24NS70, GH24LS70 | Manualzz

Installing the Drive

Before installing the drive, please note the following points.

■ You will need the following:

• A screw driver of a suitable size to fit the securing screws for the drive unit.

• The manual for the computer, so you can find the mounting positions for the

SATA cable.

■ Turn off all peripheral appliances of the computer and the computer itself, and disconnect their power cords from the wall sockets.

■ Discharge any static electricity on your person by touching the computer covers, etc.

Removing the Computer Cover

Make sure all peripheral devices of the computer and the computer itself are turned off, and then remove the cover. Refer to the manual for the computer for details about removing the cover.

NOTE : There may be sharp edges inside the computer so take care to avoid injury.

Mounting the Drive

1. Remove the 5

1

/4 ″ drive bay panel from the computer. Refer to the manual for the computer for details.

2. Insert the drive unit into the bay. Do not apply excessive pressure to the cables inside the computer.

3. Secure the drive with the screws. If there is not enough space behind the drive, connect the SATA and other cables before securing the drive.

NOTE : This is a general installation guide. If your PC hardware appears different, please consult your hardware manual for installing peripheral devices.

4

PC Connection

The Super Multi DVD Rewriter connects to the motherboard of the host computer using a SATA interface cable.

Power cable

Data cable

Power cable

Data cable

Connecting the SATA Power Cable

Connect the power cable so the projection of the cable connector side to come to the left side. Be careful not to connect upside down.

NOTE : Improper connection may damage the drive and void the warranty. Generally, the power connector can only fit one way.

Red

Connect to the power connector of the PC.

Connecting the SATA Data Cable

Connect the data cable. Be careful not to connect upside down.

Connect to the SATA connector on the PC's

Motherboard.

5

advertisement

Key Features

  • DVD±R/RW Serial ATA
  • Internal
  • LightScribe
  • Black

Related manuals

Download PDF

advertisement