Maintenance. Samsung VP-X110L, VP-M105, VPM110BLA, VP-M105R, VPM110ROOD, VP-M105B, VP-M110BMEM, VP-M110, VP-M110SMEM, SC-M105S

Add to My manuals
66 Pages


Maintenance. Samsung VP-X110L, VP-M105, VPM110BLA, VP-M105R, VPM110ROOD, VP-M105B, VP-M110BMEM, VP-M110, VP-M110SMEM, SC-M105S | Manualzz

VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 116


Miscellaneous Information: Printing Photos

Printing Photos with DPOF Files

DPOF (Digital Printing Order Format) defines the print information for the specific photos and number of each photo on the Memory Stick or Memory Stick Pro. You can easily make prints on a DPOF compatible printer or order copies.

Printing DPOF files of the Memory Stick

1. Set the print information for the photo you want to print. (Refer to page 59)

2. Insert the Memory Stick into the photo printer.

3. Follow the steps of the printer to print out photos.


✤ For further details about printing photos, refer to the User’s manual of the printer.


Maintenance : Cleaning and Maintaining the CAM

After using the CAM

For the safekeeping of the CAM, follow these steps.

✓ Turn the CAM off.

Remove the Battery Pack (refer to page 19).

Remove the Memory Stick (refer to page 33).

✤ To prevent any damage to the LCD monitor, do not apply excessive force on its moving parts.

✤ Do not drop or in anyway shock the CAM.

✤ For prolonged use of the CAM, avoid using it in places subject to excessive humidity or dust.

✤ Do not leave the CAM in places subject to:

Excessive humidity, steam, soot or dust

Excessive shock or vibration.

Extremely high (over 50 ° C or 122 ° F) or extremely low (under 0 ° C or 32 ° F) temperatures.

Strong electromagnetic fields.

✓ Direct sunlight or in a closed car on a hot day.

✤ For the safe use of the battery pack, follow these.

✓ To conserve battery power, be sure to turn off the CAM power when not in use.

✓ Battery consumption may vary depending on the condition of use. Recording with many starts and stops, frequent zooming, and recording in low temperatures will shorten actual recording times.

Dispose of used battery packs promptly. Do not dispose of them in fire.

The battery pack will become warm during charging and use. This is not a malfunction.

✓ The battery pack has a limited service life. If the period of use becomes noticeably shorter with a normal charge, the battery pack is at the end of its service life. Replace it with a new battery pack.

✤ For the safe use of the Memory Stick and the Memory Stick Pro, follow these.

✓ The Memory Stick should be stored away from heaters and other heat sources. Avoid storing Memory Sticks under direct

✓ sunlight and avoid electromagnetic fields.

Do not power off any devices while transferring data, as this may destroy the data.

Back up your image data often to a hard disk or other permanent storage media.

Format the Memory Stick periodically.

When formatting the Memory Stick or Memory Stick Pro, format in the CAM. If you format it on PC, use the

‘ Memory Stick Formatter ’ in the supplied software CD.

VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 118


Maintenance : Cleaning and Maintaining the CAM

Cleaning the Body

To Clean the Exterior of the CAM

✓ To clean the exterior, use a soft dry cloth. Wipe the body gently.

Do not apply excessive force when cleaning, gently rub the surface.

The LCD monitor surface should not be pressed. Use a soft dry cloth to clean the surface.

To clean the lens, use an optional air blower to blow out dirt and other small objects. Do not wipe the lens with cloths or your fingers. If necessary, use lens cleaning paper.

Do not use thinner, alcohol or benzene for cleaning. Otherwise, the finish may be damaged.

Cleaning should be done only after the battery pack has been removed, and other power sources have been disconnected.


✤ If the lens look dimmer, turn off the CAM and leave it for about 1 hour.

Using the Built-in Rechargeable Battery

The CAM incorporates a rechargeable lithium cell that maintains the date and other settings even when the AC adaptor and the battery are removed. The rechargeable lithium cell is automatically recharged when the CAM is used.

Charging the Built-in Rechargeable Battery

If The CAM is not used at all, the cell runs down in 5 days. In this case, connect the AC adaptor to the CAM and turn on the power switch. Then leave it for 24 hours.

After that, set the date and other settings again.


Maintenance : Cleaning and Maintaining the CAM

Using the CAM Abroad

Each country or region has its own electric and colour systems.

✤ Before using the CAM abroad, check the following items:

Power Sources

You can use the CAM in any country or area with the supplied AC Power Adapter where the power input range is

100V ~ 240V, 50/60Hz.

Use a commercially available AC plug adapter if necessary, depending on the design of the local wall outlets.

Colour System

You can view your video files using the built-in LCD monitor.

However, to view your recordings on a television set or to copy it to a video cassette recorder (VCR), the television set or the VCR must comply with PAL-compatible and have the appropriate Audio / Video ports. Otherwise, you may need to use a separate Video

Format Transcoder (PAL-NTSC format Converter).

PAL-Compatible Countries / Regions

Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece, Great Britain,

Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius, Norway, Romania, Saudi Arabia, Singapore, Slovak

Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc.

NTSC-Compatible Countries / Regions

Bahamas, Canada, Central America, Japan, Mexico, Philippines, Korea, Taiwan, United States of America, etc.


Key Features

  • 8 MP CCD Silver
  • Optical zoom: 10x Digital zoom: 100x
  • Built-in microphone

Related manuals


Table of contents