Specifications. Audiovox AMP-610

Add to my manuals
16 Pages


Specifications. Audiovox AMP-610 | Manualzz


This power amplifier has been designed to provide high quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which it is installed. We therefore advise that you read these instructions very carefully to familiarize yourself with the product and it's features.

Should you require assistance with the installation or wiring of this unit, please call our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.


Maximum Output Power

4-Channel Operation:

2-Channel Operation:

Output Power @ 1% T.H.D.

4-Channel Operation:

2-Channel Operation:

Output Impedance:

Frequency Response:

Channel Separation:

125 watts x 4

500 watts x 2

600 watts RMS x 4

120 watts RMS x 2

2 - 8 ohms (stereo)

4 - 8 ohms (mono)

10 - 50,000 Hz. ± 1 dB

55 dB

Signal / Noise Ratio:

Input Impedance:

Input Sensitivity:

Supply Voltage:

Fuse Rating:

Dimensions (W x H x D):



Monday - Friday 8:30am - 7:00pm Eastern

S a t u r d a y

9:00am - 5:00pm Eastern

90 dB (A-Weighted) low-level 10K ohms high-level 100 ohms low-level 200 mv. - 5 v.

high-level 2 - 10 v.

12 volts, negative ground

20 amps.

9" x 2-1/4" x 10-5/8"

230 mm x 57 mm x 270 mm

* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.



Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals