Adjusting Sub Level and Tone. Fusion MS-AV700, MS-IP700

ADJUSTInG SUB-WOOFER LEVEL AnD TOnE

Use the Sub level and Tone screens to set the sub-woofer levels and tone.

Sub-woofer level can be adjusted for each Zone individually, but tone adjustments affect all Zones.

Menu key Encoder

To set sub-woofer levels or tone:

1. Press and hold down the Encoder for at least one second. The Sub level screen is displayed.

2. Turn the Encoder to adjust the sub-woofer level for the highlighted Zone, as required.

3. Press the Encoder to highlight the next Zone, and adjust as required. When you press the Encoder in the last Zone, the Tone screen is displayed.

11