hiti640.book Page 51 Monday, June 24, 2002 2:46 PM
Chapter 7
Specifications
Print Model
Print Method
Color
Resolution
HiTi 640 DL
Dye Diffusion Thermal Transfer
YMCO 4 Passes
Continuous-tone output,
256-level each color
403x403 dpi, equal to inkjet 6400 dpi
Print Pixel
Print Size
Paper Size
1612x2436 pixels
4x6 inches
4x7 inches with detachable boundary
Paper Cassette 100 sheets
Ribbon Cartridge 100 images
Hi-Ti 640 DL Photo Printer User Manual
Specification, Regulatory and Warranty
I/O Interface
Dimension (mm)
Weight
USB 1.1
264 (W) x148.9 (H) x 368.2 (L)
8 Kgw www.hi-ti.com
51
hiti640.book Page 52 Monday, June 24, 2002 2:46 PM
HiTi 640 DL Photo Printer User Manual
Package Contents
• HiTi Photo Printer 640 DL x1
• Photo Paper Cassette x1
• Software CD-Rom x1
• User Manual x1
• Quick Installation Guide x1
• USB Cable x1
• Power Cord x1
52
Package Contents www.hi-ti.com
hiti640.book Page 53 Monday, June 24, 2002 2:46 PM
System Requirements
System Requirements
• Operation System: Windows 98/ME/2000/XP
• Pentium PC designed to run Windows 98/ME/2000/XP
• 128 MB DRAM or greater
• 100 MB hard disk space or greater
• USB port
Hi-Ti 640 DL Photo Printer User Manual www.hi-ti.com
53
hiti640.book Page 54 Monday, June 24, 2002 2:46 PM
HiTi 640 DL Photo Printer User Manual
Limited Warranty Statement
Ver. 1.1. October 2002, revised by Hi-Touch Imaging Technologies.
HiTi products
Photo printer warranty period
1 year
Limited Warranty Statement
A. Extent of Limited Warranty
1.
Hi-Touch Imaging Technologies (HiTi) warrants to the end-user customer that the HiTi products specified above will be free from defects on materials and workmanship for the duration specified above, which duration begins on the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase.
2.
For software products, HiTi's limited warranty applies only to a failure to execute programming instructions. HiTi does not warrant that the operation of any product will be uninterrupted or error free. The other concerned with software warranties, please refer to declaration of "License Agreement" during installation.
3.
HiTi's limited warranty covers only those defects, which arise as a result of normal use of the product, and do not apply to any: a.
b.
c.
Improper or inadequate maintenance or modification.
Software, interfacing, media, parts, ribbons, photo papers, stickers, or other supplies not provided or supported by HiTi.
Bundled software or elements. Their warranties and services should be supported by the original manufactures.
54 www.hi-ti.com
hiti640.book Page 55 Monday, June 24, 2002 2:46 PM
Limited Warranty Statement Hi-Ti 640 DL Photo Printer User Manual d.
Operation outside the product's specifications. Such as use the personal photo printer to be a commercial mass printing, and make defect of parts, HiTi would not responsible for the services.
4.
For HiTi printer products, the use of a non-HiTi ribbon cartridge, or a refilled ribbon cartridge, non-HiTi photo paper or sticker. HiTi will charge its standard time and materials charges to service the printer for the particular failure of damage.
5.
If HiTi receives, during the applicable warranty period, notice of a defect in any software, media, or ink cartridge product, which is covered by HiTi's warranty, HiTi shall replace the defective product. If HiTi receives, during the applicable warranty period, notice of a defect in any hardware product, which is covered by HiTi's warranty, HiTi shall either repair or replace the defective product, at HiTi's option.
6.
If HiTi is unable to repair or replace, as applicable, a defective product which is covered by HiTi's warranty, HiTi shall within a reasonable time after being notified of the defect, refund the purchase price for the product.
B. Limitations of Warranty
1.
TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HiTi NOR ITS THIRD PARTY SUPPLIERS MAKE ANY
OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO
THE HiTi PRODUCTS, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE.
C. Limitations of Liabilities
1.
To the extent allowed by local law, the remedies provided in this Warranty Statement are the customer's sole and exclusive remedies.
www.hi-ti.com
55
hiti640.book Page 56 Monday, June 24, 2002 2:46 PM
HiTi 640 DL Photo Printer User Manual Limited Warranty Statement
2.
To the extent allowed by local law, except for the obligations specifically set forth in this warranty statement, in no event shall HiTi or its third party suppliers be liable for direct, indirect, special, incidental, or consequential damages, whether based on contract, tort, or any other legal theory and whether advised of the possibility of such damages.
D. Local Law
1.
To the extent that this Warranty Statement is inconsistent with local law, this Warranty Statement shall be deemed modified to be consistent with such local law. Under such local law, certain disclaimers and limitations of this
Warranty Statement may not apply to the customer.
Safety Instructions
1.
Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product.
2.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3.
Do not use this product near water.
4.
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
5.
Openings in the cabinet and the bottom are provided for ventilation; to ensure reliable operation of the product and to protect it form overheating, these openings must not be blocked or covered. Placing the product on a bed, sofa,
56 www.hi-ti.com
hiti640.book Page 57 Monday, June 24, 2002 2:46 PM
Limited Warranty Statement Hi-Ti 640 DL Photo Printer User Manual rug, or other similar surface should never block the openings. Theirs products should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.
6.
This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
7.
If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
8.
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
FCC Information
The Federal communication Commission Radio Frequency Interference Statement includes the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If these equipment doses cause harmful interference to radio or television reception, which can be determined by interference by on or more of the following measures:
1.
Reorient or relocate the receiving antenna.
www.hi-ti.com
57
hiti640.book Page 58 Monday, June 24, 2002 2:46 PM
HiTi 640 DL Photo Printer User Manual Limited Warranty Statement
2.
Increase the separation between the equipment and receiver.
3.
Never push objects of any kind into these products through cabinet openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
4.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
5.
The users should not modify or change this equipment without written approval from this company. Modification could void authority to use this equipment.
58 www.hi-ti.com