Video Settings. Mitsubishi Electronics WD-52631

Add to my manuals
108 Pages

advertisement

Video Settings. Mitsubishi Electronics WD-52631 | Manualzz

Chapter 4. TV Menu Settings 59

Audio/Video Menu, continued

Video Settings

Enter the video adjustment mode using either the Audio/

Video menu or the VIDEO key. Press the VIDEO key repeatedly to cycle through the video options to the one you want to change. Use to change settings.

Note: A slider displays on screen for some settings.

When the slider is displayed, it represents numeric values, with 63 as the maximum, 31 as the midpoint, and 0 as the minimum.

◊ Picture Mode: Set the Picture Mode first before adjusting other settings, as each Picture Mode stores its own values for Contrast, Brightness, and Color

Temperature. Picture Modes allow you to optimize the image for different lighting conditions. The Picture

Modes are:

• Bright: Suited for most daytime viewing.

• Natural: Suited for most nighttime viewing.

• Brilliant: The default setting. For use under strong light.

◊ Contrast (Bright/Natural/Brilliant): Provides a slider to adjust the white-to-black level. Low contrast shows a variety of shades in darker images, while high contrast shows darker images more uniformly black and makes colors appear more vibrant. In most home lighting situations, a medium contrast looks best.

High contrast is good for brightly lit environments.

◊ Brightness (Bright/Natural/Brilliant): Provides a slider to adjust the overall brightness of the picture

.

◊ Color: Provides a slider to adjust color intensity.

◊ Tint: Provides a slider to adjust the red-to-green ratio.

◊ Sharpness: Provides a slider to adjust the detail and clarity.

◊ Color Temperature (Bright/Natural/Brilliant): Allows you to adjust how white is displayed.

• Low: White images have a warm cast. This adjustment is an average and can vary due to ambient room lighting, video scene brightness, and the TV’s age. Natural/Color Temp at the low setting displays video at the 6500K industry standard for NTSC pictures.

• High: White images have a cool cast. This setting may provide the most realistic picture under bright lighting.

◊ PerfectColor™: Lets you adjust the intensity of any or all of six colors (Magenta, Red, Yellow, Green,

Cyan and Blue) to create color balance for the current image source. PerfectColor settings are memorized for each TV input or device. Select the PerfectColor option and press ENTER to open the adjustment screen.

Individual sliders for each color are displayed.

Highlighted text shows which slider you are adjusting.

Press CANCEL while in the PerfectColor screen to reset all colors to the default settings.

Name of affected input

Figure 14. Set PerfectColor adjustments independently for each TV input.

◊ Video Noise: Reduces minor noise (graininess) in the picture. Use the Low setting with good-quality signals. Use High with poor-quality signals. Turn off to leave the picture unaltered.

Personal Computer Video Settings

Video settings available for images from a personal computer are:

◊ Contrast

◊ Brightness

◊ PerfectColor™. The adjustment screen displays without the vertical color bars when used for a computer image,

◊ Auto Position: Press ENTER to automatically center the position of the PC video.

◊ HorizPosition (Horizontal Position): Manually adjust the horizontal position of PC video. This selection overrides the Auto Position selection.

◊ VertPosition (Vertical Position): Manually adjust the vertical position of PC video. This selection overrides the Auto Position selection.

◊ Fine Detail: Manually adjust the picture quality of PC video, analog signals only. This selection overrides the Auto Position selection.

60 Chapter 4. TV Menu Settings

5

Operating Other Devices with the Remote

Control

Functions Available for Other A/V Devices

. . . . . . . . . . . . . . . . . .

62

Programming the Remote Control

. . . . . . . . . . . . . . . . . . . . . . .

63

Programming Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

64

62 Chapter 5. Operating Other Devices with the Remote Control

Functions Available for Other A/V

Devices

The TV’s remote control can be programmed to operate other types and brands of A/V products. To use the remote when programmed, set the slide switch to the position labelled for the product type. The functions performed in each switch position can vary depending on the product. Not all functions work for all models. The most common functions available are listed on this page.

Set the remote control’s slide switch to the type of device you wish to program for or control.

IMPORTANT

Some manufacturers may change their products or they may use more than one remote control system. The TV’s remote control may be unable to operate your A/V equipment in these cases.

VCRs and DVRs

• CH /

• POWER

• SLEEP

(FAST FORWARD)

(PAUSE)

(PLAY)

(RECORD)

(REVERSE)

• (STOP)

• GUIDE (DVR only)

• MENU (DVR only)

• 0–9 Number Buttons

Mitsubishi VCRs are compatible with some additional buttons.

Cable Boxes and Satellite Receivers

AUDIO (PAGE UP)

CANCEL (on some models)

• CH /

• ENTER (on some models)

• GUIDE (on some models)

• POWER

• (on some models)

• VIDEO (PAGE DOWN)

• QV (ENTER for channels on some models)

• 0–9 Number Buttons (on some models)

• F1–F4 (A, B, C, D keys on some models)

The record/playback keys

(on some models):

(FAST FORWARD)

(PAUSE)

(PLAY)

(RECORD)

(REVERSE)

(STOP)

A/V Receivers

• MUTE

• POWER

• SLEEP

• VOLUME

• 0–9 Number Buttons

• Direct Input Selection buttons: numbers,

FAV and QV (on some

Mitsubishi models)

CD Players

(not all functions for all models)

• SLEEP

(FAST FORWARD)

(PAUSE)

(PLAY)

(REVERSE)

(STOP)

• 0–9 Number Buttons

DVD and Laser Disc Players

(not all functions for all models)

• CANCEL (on some models)

• CH / (for track skip on some models)

• ENTER

• MENU

• POWER

• SLEEP

• (on some models)

(FAST FORWARD)

(PAUSE)

(PLAY)

(RECORD)

(REVERSE)

(STOP)

• 0-9 Number Buttons (on some models)

Chapter 5. Operating Other Devices with the Remote Control 63

Programming the Remote Control

Method 1: Code Entry

1. Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position.

Switch Position Affected Device

CABLE/SAT Cable Box

DTV Receiver

Satellite Receiver

VCR

DVD

VCR

DVR

Laser Disc Player

DVD Player/Recorder

DVD Player/Recorder

DVR

Laser Disc Player

VCR

AUDIO A/V Receiver

Audio Amplifier

CD Player*

6. Once you have found the correct code, write it in the space below for future reference.

Code Switch Position Device Type

CABLE/SAT

VCR

DVD

AUDIO

Method 2: Code Search

In this method of programming, you step through the remote control’s internal code library to find the correct code for your A/V product.

1. Move the slide switch at the top of the remote control to the correct position for the product. See the table under “Method 1.”

2. Press and hold POWER on the remote control for several seconds until the button blinks twice and goes off.

3. Press keys 9 9 1

4. Press the number 1, 2, or 3 depending on the slideswitch position and the table below.

Switch Position

CABLE/SAT

DVD, VCR

AUDIO

Number

1

2

3

2. Press and hold POWER on the remote control for several seconds until the button blinks twice and goes off.

3. Release the POWER button.

4. Enter the first five-digit code listed for your equipment.

• The POWER button blinks twice when you start to enter the code and then once for each additional keypress.

• The POWER button blinks twice when you finish entering a valid code.

• Move the slide switch to another position if you need to start over or wish to exit programming mode.

5. Point the remote control at the equipment and press

POWER. If the product has no power on/off function, press a different key, such as (PLAY), (STOP),

VOL , or MUTE.

• If the equipment responds, the remote control is properly programmed to operate the equipment.

• If the equipment does not respond, repeat steps

2–4 with the next five-digit code listed for your equipment.

IMPORTANT

You may need to reprogram the remote control after changing the batteries.

5. Press CH and POWER repeatedly until the product responds by powering on or off. You can press CH to move backward through the code library if needed.

NOTE: If the product has no power on/off function, check for a response using a different function. Press

(PLAY), (STOP), VOL , or MUTE and then repeatedly press CH / to check for a response.

6. When the product responds, press ENTER to set the code.

Code Verification

To determine the code programmed for any position of the slide switch:

1. Move the slide switch to the position you wish to verify.

2. Press and hold POWER on the remote control for several seconds until the button blinks twice and goes off.

3. Press keys 9 9 0

4. Press 1 and count the blinks of the power button.

Write down the number of blinks as the first digit of the code.

5. Repeat step 4 for the second, third, fourth, and fifth digits of the code.

64 Chapter 5. Operating Other Devices with the Remote Control

Audio Lock: Universal A/V Receiver Control

With Audio Lock active, the remote control operates the volume and mute functions of the A/V receiver in all positions of the slide switch. Activate Audio Lock if you normally use an A/V receiver with your TV and other A/V equipment.

1. Program the AUDIO position for your A/V receiver as described earlier in this section.

2. Move the slide switch to the AUDIO position.

3. Press and hold POWER on the remote control for several seconds until the button blinks twice and goes off.

4. Press keys 9 9 3 ENTER

The POWER button will blink twice to indicate Audio Lock is active.

To Reset the Remote Control to Operate

Volume and Mute for the TV Speakers

1. Press and hold POWER for several seconds until the button blinks twice and goes off.

2. Press keys 9 9 3 VOL .

The POWER button will blink four times to indicate Audio

Lock has cleared.

Resetting the Remote Control

If the slide switch is set to TV and the TV does not respond properly, do the following to reset the remote control.

1. Press and hold POWER for several seconds until the button blinks twice and goes off.

2. Release the POWER button.

3. Press keys 0 0 9 3 5 and the POWER button will blink twice when you finish entering the code. While entering the code, pause for a moment between each key press to ensure it is recognized.

Programming Codes

Audio Amplifiers

Brand

Acurus

Adcom

Altec Lansing

Aragon

Bel Canto Design

Bose

Carver

Classe

Curtis Mathes

Durabrand

Elan

GE

Harman/Kardon

JVC

Klipsch

Left Coast

Lenoxx

Lexicon

Logitech

Marantz

Mark Levinson

McIntosh

Mondial

Optimus

Philips

Pioneer

Polk Audio

RCA

Realistic

Sharp

Sony

Soundesign

Technics

Toshiba

Victor

Wards

Yamaha

Code

30765

31100, 30577

31742

30765

31583

30674

30892

31462, 31461

30300

31561

30647

30078

30892

30331

30765

30892

31561

31802

31408

30892

31483

30251

30765

30823, 30395, 30300

30892

30823, 30300, 30257, 30013

30892

30823, 30300

30395

30226

30815

30078

30374, 30372

30353

30331

30078, 30013

30354

A/V Receivers

Brand

ADC

Adcom

Aiwa

Code

30531

31617, 31616

31641, 31405, 31388, 31347,

Akai

Alco

AMC

31321, 31243, 30189, 30121

31255

31390

31077

Amplifier Technologies 31584

Anam

Apex Digital

31609, 31074

31774, 31430, 31257

Arcam 31189

Atlantic Technology 31487

Audiophase 31387

Chapter 5. Operating Other Devices with the Remote Control

Programming Codes, continued

A/V Receivers

Brand

Audiotronic

Audiovox

B & K

Bel Canto Design

BK

Bose

Code

31189

31627, 31390

30840, 30820, 30701

31584

30702

31253, 31229, 30639

31602 Brix

Cambridge Soundworks 31477

Capetronic

Carver

30531

31289, 31189, 30189, 30121

31263

30797

Coby

Curtis

Delphi

Denon

Fisher

Fosgate

Glory Horse

GPX

Harman/Kardon

31414

31360, 31311, 31142, 30121,

31801, 31409

31487

31263

31299

31306, 31304, 31289, 30891,

Hitachi

Integra

JBL

JVC

Kenwood

KLH

Koss

Linn

Liquid Video

Magnavox

30189, 30110

31801, 31273

31320, 31298, 30135

31306, 30110

31811, 31643, 31495, 31374,

31282, 31263, 31058

31570, 31569, 31313

31428, 31390

31497, 31366

30189

31497

31514, 31269, 31189, 30531,

Marantz

McIntosh

Micromega

Mitsubishi

Myryad

Nakamichi

Onkyo

Optimus

Oritron

Outlaw

Panasonic

Philips

Pioneer

Polk Audio

Proscan

RadioShack

30189

31289, 31269, 31189, 30200,

30189,

31289

31189

31957, 31922, 31921, 31920,

31393, 30176

31189

31555, 31313, 30097

31320, 31298, 30842, 30135

31074, 31023, 30849, 30797,

30670, 30531

31497, 31366

31487

31764, 31763, 31633, 31548,

31518, 31509, 31363, 31350,

31316, 31308, 31288, 30309

31368, 31365, 31283, 31269,

31268, 31266, 31189, 30189

31384, 31343, 31023, 30630,

30531, 30150, 30014

31414, 31289, 30189

31254

31263

A/V Receivers

Brand

RCA

Rio

Samsung

Sansui

Sanyo

Sharp

Sharper Image

Sherwood

Sirius

Sonic Blue

Sony

Soundesign

Stereophonics

Sunfire

Sylvania

Teac

Technics

Thorens

Toshiba

Venturer

Wards

XM

Yamaha

Code

31609, 31511, 31390, 31254,

31074, 31023, 30531

31869

31500, 31295

31189, 30189

31801

31386, 31361

31416, 31411, 31410, 31409,

31385, 31263, 30797

31077

31811, 31627, 31602

31869

31858, 31759, 31758, 31658,

31622, 31558, 31529, 31503,

31458, 31441, 31406, 31382,

31371, 31367, 31258, 31131,

31058

30670

31023

31313

30797

31528, 31390, 31267, 31074

31633, 31518, 31308, 30309

31189

30135

31390, 30849

30189, 30014

31414, 31406

31375, 31331, 31276, 31176,

30176

CD Players

Brand

Aiwa

Akai

Code

30157

30156

30157 Arcam

Audio-Technica

Burmester

30170

30420

California Audio Labs 30303, 30029

Carver

Classic

Denon

DKK

DMX Electronics

Emerson

Fisher

Garrard

Gemini

Genexxa

GPX

Harman/Kardon

Hitachi

Integra

30437, 30299, 30179, 30157

31297

30873, 30034, 30003

30000

30157

30305

31325, 30179, 30174

30420, 30393

30625

30305, 30032

31296

31202, 30173, 30157, 30083

30032

30101

65

66 Chapter 5. Operating Other Devices with the Remote Control

Panasonic

Parasound

Philips

Pioneer

Polk Audio

Proceed

Proton

QED

Quad

Quasar

RadioShack

RCA

Realistic

Rotel

SAE

Sansui

Sanyo

Scott

Sears

Sharp

Sherwood

Sonic Frontiers

Sony

Soundesign

Sugden

Programming Codes, continued

CD Players

Brand

JVC

Kenwood

KLH

Koss

Krell

LG

Linn

LXI

Magnavox

Marantz

Mark Levinson

McIntosh

MCS

MGA

Miro

Mission

Mitsubishi

MTC

NAD

Nikko

NSM

Onkyo

Optimus

Code

31294, 30072

30826, 30681, 30626, 30190,

30037, 30028,

31711, 31373, 31372, 31318

31317

30157

31208

30157

30305

30305, 30157, 30038

30626, 30435, 30180, 30157,

30038, 30029

31484

30660, 30290, 30256

30029

30083

30000

30157

30098, 30083

30625, 30420

30299, 30019

30625, 30174, 30170

30157

31327, 30868, 30102, 30101

31075, 31063, 30468, 30437,

30420, 30305, 30179, 30145,

30087, 30037, 30032, 30000

30752, 30388, 30303, 30029

30420

30626, 30274, 30157

31087, 31063, 31062, 30551,

30468, 30305, 30032

30157

30420

30157

30157

30157

30029

31075

31062, 30764, 30468, 30420,

30305, 30179, 30053, 30032

30420, 30180, 30179

30420, 30157

30157

30305, 30157

30179, 30087

30305

30305

30861, 30265, 30180, 30037

31067, 30180

30157

31364, 30673, 30605, 30604,

30490, 30185, 30100, 30000

30145

30157

CD Players

Brand

Symphonic

TAG McLaren

Tascam

TDK

Teac

Technics

Tivoli Audio

Toshiba

Victor

Wards

Yamaha

YBA

Yorx

Code

30305

30157

30420

31208

30420, 30393, 30378, 30180,

30174

30303, 30029

31553

30299, 30019

30072

30157, 30053

31292, 30888, 30490, 30261,

30187, 30170, 30036,

30625

30461

Cable Boxes

Brand

ABC

Allegro

Americast

Antronix

Archer

BBT

Belcor

Bell & Howell

Bell South

Cable Star

Cabletenna

Cableview

Century

Citizen

Clearmaster

ClearMax

Colour Voice

Comtronics

Contec

Coolmax

Digeo

Digi

Director

Dumont

Eastern

Emerson

Everquest

Focus

Garrard

GC Electronics

Gemini

General Instrument

GoldStar

Goodmind

Code

10017, 10014, 10013, 10011,

10008, 10007, 10003, 10001

10315, 10153

10899

10207, 10022

10797, 10207, 10153, 10022

10267

10056

10014

10899

10056

10022

10022

10153

10315, 10153

10883

10883

10031, 10025

10040

10019

10883

11187

10637

10476

10637

10002

10797

10040, 10015

10400

10153

10207, 10056

10797, 10015

10810, 10476, 10276, 10011,

10003

10144, 10040

10797

Chapter 5. Operating Other Devices with the Remote Control

Linsay

Magnavox

Memorex

Motorola

Movie Time

Multitech

Myrio

Novaplex

NSC

Oak

Optimus

Pace

Panasonic

Panther

Paragon

Philips

Pioneer

Popular Mechanics

Pulsar

Quasar

RadioShack

RCA

Realistic

Recoton

Regal

Regency

Rembrandt

Runco

Samsung

Scientific Atlanta

Seam

Sejin

Signal

Signature

SL Marx

Sony

Sprucer

Starcom

Stargate

Starquest

StarSight

Supercable

Supermax

Programming Codes, continued

Cable Boxes

Brand

Hamlin

Hitachi

Hytex i3 Micro

Jasco

Jerrold

Code

10273, 10259, 10034, 10020,

10009

10011

10007

11602

10315, 10153, 10015

10810, 10476,10276, 10024,

10015, 10014, 10012, 10011,

10003

10440

10027

10000

11376, 11254, 11187, 11106,

10810, 10476, 10276, 10014

10156, 10063

10883

11602

10618

10156, 10063

10019, 10007

10021

11877, 10237, 10008

10107, 10021, 10000

10637

10000

11305, 10317, 10153, 10031,

10027, 10025

11877, 10877, 10533, 10144,

10023

10400

10000

10000

10883, 10797, 10315, 10015

11256, 10021

10207

10400

10279, 10273, 10259, 10020

10002

10011

10000

10144, 10040

11877, 10877, 10477, 10017,

10008,

10510

11602

10040, 10015

10011

10040

11006

10021

10015, 10003

10797, 10040, 10015

10015

10422

10276

10883

Cable Boxes

Brand

Sylvania

Tandy

TeleCaption

Teleview

Texscan

TFC

Thomson

Timeless

Tocom

Torx

Toshiba

Tristar

Tusa

TV86

Unika

United Artists

Universal

V2

Viewmaster

Viewstar

Vision

Vortex View

Zenith

Zentek

Code

10001

10258

10221

10040

10001

10310

11256

10418, 10040

10013, 10012

10003

10000

10883

10015

10063

10207, 10153, 10022

10007

10207, 10191, 10153, 10056,

10022,

10883

10883

10258, 10063, 10027

10883

10883

10899, 10525, 10054, 10000

10400

DVD Players/Recorders

Brand

Adcom

Aiwa

Akai

Alco

Code

21094

20641

21089, 20770

20790

20869 Allegro

Amphion Media Works 20872

AMW

Apex Digital

20872

21100, 21061, 21056, 21020,

21004, 20797, 20796, 20794,

Aspire Digital

Audiologic

Audiovox

Axion

B & K

Bel Canto Design

Blaupunkt

Blue Parade

20755, 20717, 20672

21407, 21168

20736

21072, 21041, 20790

21072

20662, 20655

21571

20717

Broksonic

20571

20695

California Audio Labs 20490

CAVS

Cinea

CineVision

Citizen

Coby

21057

20831

20876, 20869, 20833

21277

21351, 21177, 21165, 21107,

Craig

21086, 20852, 20778

20831

67

68 Chapter 5. Operating Other Devices with the Remote Control

Programming Codes, continued

jWin

Kawasaki

Kenwood

KLH

Konka

Koss

Landel

Lasonic

Lecson

Lenoxx

LG

LiteOn

Loewe

Magnavox

Malata

Marantz

DVD Players/Recorders

Brand

Curtis Mathes

CyberHome

Code

21087

21129, 21117, 21024, 21023,

Daewoo

20874, 20816

21242, 21234, 21172, 21169,

Daytek

Denon

Desay

Disney

Dual

Durabrand

DVD2000

Emerson

Enterprise

Fisher

Funai

Gateway

GE

Go Video

Go Vision

GoldStar

GPX

Gradiente

Greenhill

Grundig

Harman/Kardon

Hitachi

Hiteker iLo

Initial

Integra

Jaton

JBL

JSI

JVC

20869, 20833, 20784, 20705

20872

20634, 20490

21407

21270, 20675

21085, 21068

21127

20521

21268, 20675, 20591

20591

20670

21334, 21268, 20675

21158, 21077, 21073

20815, 20717, 20522

21730, 21304, 21158, 21144,

21099, 21075,21044, 20869,

20833, 20783, 20744, 20741,

20715

21072

20741

20769, 20699

20490

20717

20539

20702, 20582

20664, 20573

20672

21348

20717

20627, 20571

21078

20702

21423

21275, 21164, 20867, 20623,

20558

21051, 21049

20790

20737, 20682, 20534, 20490

21149, 21020, 20790, 20717

20721, 20711

21423, 20896, 20651

20826

21173, 20798

21533

21127

20869, 20801, 20741, 20591

21440, 21416, 21158, 21058

20511

20675, 20646, 20539, 20503

21159, 20782

20539

DVD Players/Recorders

Brand

McIntosh

Memorex

Microsoft

Mintek

Mitsubishi

Momitsu

Myryad

NAD

Nakamichi

NEC

Nesa

Next Base

Code

21533, 21273

21270, 20831, 20695

20522

20839, 20717

21521, 20521

21082

20894

20741, 20692, 20591

21222

20785

20717

20826

21402 NexxTech

Norcent

Onkyo

21265, 21107, 21003, 20872

20792, 20627, 20503

OptoMedia Electronics 20896

Oritron

Panasonic

20651

21762, 20703, 20632, 20503,

Philips

PianoDisc

Pioneer

20490

21354, 21267, 20675, 20646,

20539, 20503,

21024

21571, 20632, 20631, 20571,

Polaroid

Polk Audio

Portland

Princeton

Proceed

Proscan

ProVision

Qwestar

RCA

Rio

RJTech

Rotel

Rowa

Sampo

Samsung

Sansui

Sanyo

Sensory Science

Sharp

Sharper Image

Sherwood

Shinsonic

Sigma Designs

Sonic Blue

Sony

Sungale

SVA

Sylvania

Symphonic

TAG McLaren

Teac

20525

21086, 21061, 21020

20539

20770

20674

20672

20522

20778

20651

20822, 20790, 20717, 20571,

20522

20869

21360

21178, 20623

20823

20752, 20698

21075, 21044, 20820, 20744,

20573, 20490

20695

20873, 20695, 20670

21158

21256, 20752, 20675, 20630

21117

21077, 21043, 20770, 20633

20839, 20533

20674

21099, 20869

21533, 21431, 21033, 20864,

20533

21074

21105, 20860

21268, 20675

21268, 20675

20894

20809, 20790

Chapter 5. Operating Other Devices with the Remote Control

Programming Codes, continued

DVD Players/Recorders

Brand

Technics

Technosonic

Techwood

Terapin

Theta Digital

Toshiba

Tredex

Urban Concepts

US Logic

Venturer

Vizio

Vocopro

Xbox

Xwave

Yamaha

Yamakawa

Zenith

Zoece

Code

20703, 20490

20730

20692

21031

20571

21154, 20695, 20503

20804, 20803, 20800, 20799

20503

20839

20790

21226, 21064

21027

20522

21001

20545, 20539, 20490

20872

20869, 20741, 20591, 20503

21265

Laser Disc Players

Brand

Aiwa

Carver

Denon

Disco Vision

Funai

Harman/Kardon

Hitachi

Kenwood

Magnavox

Marantz

Mitsubishi

NAD

Optimus

Panasonic

Philips

Pioneer

Polk Audio

Quasar

Realistic

Samsung

Sega

Sony

Technics

Theta Digital

Yamaha

Code

20203

20323, 20194, 20064

20243, 20241, 20172, 20059

20023

20203

20194

20023

20258

20243, 20241, 20217, 20194

20194, 20064

20059

20059

20059

20204

20194,20064

20059, 20023

20194

20204

20203

20323

20023

20270, 20201, 20193

20204

20194

20451, 20217

Satellite Receivers

Brand

AlphaStar

Chaparral

Crossdigital

Code

10772

10216

11109

Satellite Receivers

Brand

DirecTV

Expressvu

GE

General Instrument

GOI

Goodmans

Hisense

Hitachi

HTS

Hughes Network

Systems iLo

Jerrold

JVC

LG

Magnavox

Memorex

Mitsubishi

Motorola

NEC

Next Level

Panasonic

Paysat

Philips

Code

11856, 11749, 11640, 11639,

11609, 11444, 11443, 11442,

11414, 11392, 11377, 11142,

11109, 11108, 11076, 10819,

10749, 10724, 10639, 10566,

10392, 10247, 10099

Dish Network System 11775, 11505, 11170, 11005,

Dishpro

Echostar

10775,

11775, 11505, 11005, 10775

11775, 11505, 11170, 11005,

10775

11775, 10775

10566, 10392

10869

11775, 10775

11246

11535

11250, 10819

11775, 10775

11749, 11444, 11443, 11442,

11142, 10749

11535

10869

11775, 11170, 10775

11414, 11226

10724, 10722

10724

10749

10869, 10856

11270

10869

10701, 10247

10724

11749, 11442, 11142, 11076,

Pioneer

Proscan

Proton

RadioShack

RCA

Samsung

Sanyo

Sony

Star Choice

Tivo

Toshiba

UltimateTV

Uniden

US Digital

USDTV

Voom

Zenith

10819, 10749, 10724, 10722,

10099

11442

10566, 10392

11535

10869

11392, 10855, 10566, 10392,

10143,

11609, 11442, 11377, 11276,

11142, 11109, 11108

11219

11640, 11639, 10639

10869

11444, 11443, 11442, 11142

11749, 11285, 10819, 10790,

10749

11640, 11392

10724, 10722

11535

11535

10869

11856

69

70 Chapter 5. Operating Other Devices with the Remote Control

Programming Codes, continued

VCRs and DVRs

Brand

ABS

Admiral

Adventura

Aiko

Aiwa

Akai

Alienware

America Action

American High

Asha

Audiovox

Beaumark

Bell & Howell

Broksonic

Calix

Canon

Capehart

Carver

CCE

Citizen

Colt

Craig

Curtis Mathes

Cybernex

CyberPower

Daewoo

Daytron

Dell

Denon

DirecTV

Durabrand

Dynatech

Electrohome

Electrophonic

Emerex

Emerson

Fisher

Fuji

Funai

Garrard

Gateway

GE

Go Video

GoldStar

Gradiente

Code

21972

20479, 20209, 20048

20000

20278

20307, 20124, 20037, 20000

20242, 20175, 20106, 20061,

20041

21972

20278

20035

20240

20278, 20037

20240

20104

20479, 20295, 20209, 20184,

20121, 20002

20037

20035

20020

20081

20278, 20072

20278, 20037

20072

20271, 20240, 20072, 20047,

20037

20760, 20162, 20060, 20041,

20035

20240

21972

20637, 20561, 20278, 20045,

20020

20020

21972

20042

20739

20039, 20038

20000

20043, 20037

20037

20032

21593, 20637, 20593, 20561,

20479, 20295, 20278, 20212,

20209, 20208, 20184, 20121,

20068, 20061, 20043, 20037,

20036, 20002, 20000

20104, 20066, 20054, 20047

20035, 20033

21593, 20593, 20000

20000

21972

20761, 20760, 20240, 20202,

20060, 20035

20643, 20526, 20432, 20240

20038, 20037

20000

VCRs and DVRs

Brand

Harley Davidson

Harman/Kardon

Harwood

Headquarter

Hewlett Packard

HI-Q

Hitachi

Magnin

Marantz

Marta

Matsushita

Media Center PC

MEI

Memorex

Code

20000

20081, 20075, 20038

20072, 20068

20046

21972

20047

20105, 20089, 20042, 20041,

20000

Howard Computers 21972

HP 21972

Hughes Network Systems 20739, 20042

Humax

Hush iBUYPOWER

Jensen

JVC

KEC

Kenwood

KLH

Kodak

LG

Linksys

Lloyd’s

Logik

LXI

Magnasonic

Magnavox

20739

21972

21972

20041

21162, 20067, 20041, 20008

20278, 20037

20067, 20041, 20038

20072

20037, 20035

21037

21972

20208, 20000

20072

20037

20593

20593, 20563, 20149, 20110,

20081, 20039, 20035, 20000

20240

20081, 20035

20037

21162, 20162, 20035

21972

20035

21262, 21162, 21037, 20479,

MGA

MGN Technology

Microsoft

Mind

Minolta

Mitsubishi

Motorola

MTC

Multitech

NEC

Nikko

Nikon

Niveus Media

Noblex

Northgate

Olympus

Onkyo

20307, 20240, 20209, 20162,

20104, 20048, 20047, 20046,

20039, 20037, 20035, 20000

20240, 20061, 20043

20240

21972

21972

20105, 20042

20443, 20242, 20214, 20173,

20075, 20067, 20061, 20043

20048, 20035

20240, 20000

20072, 20000

20104, 20067, 20041, 20040,

20038

20037

20034

21972

20240

21972

20035

20222

Chapter 5. Operating Other Devices with the Remote Control

ReplayTV

Ricavision

Ricoh

Runco

Salora

Samsung

Samtron

Sanky

Sansui

Sanyo

Scott

Sears

Optonica

Orion

Panasonic

Penney

Pentax

Philco

Philips

Pilot

Pioneer

Polk Audio

Portland

Profitronic

Proscan

Protec

Pulsar

Quarter

Quartz

Quasar

RadioShack

Radix

Randex

RCA

Programming Codes, continued

VCRs and DVRs

Brand

Optimus

Realistic

Sharp

Shintom

Shogun

Code

21262, 21162, 21062, 21048,

20593, 20432, 20162, 20104,

20048, 20037

20062

20479, 20295, 20209, 20184,

20002

21262, 21162, 21062, 20616,

20225, 20162, 20077, 20035

20240, 20054, 20042, 20040,

20038, 20037, 20035

20105, 20042

20035

21181, 21081, 20739, 20618,

20110, 20081, 20062, 20035

20037

20067

20081

20020

20240

20761, 20760, 20202, 20060

20072

20039

20046

20046

21162, 20162, 20077, 20035

21037, 20000

20037

20037

20880, 20761, 20760, 20240,

20202, 20149, 20106, 20105,

20077, 20060, 20042

20104, 20066, 20062, 20048,

20047, 20046, 20037, 20035,

20000

20616, 20614

21972

20034

20039

20075

20739, 20240, 20045

20643

20048, 20039

20479, 20271, 20209, 20067,

20041, 20000

20240, 20159, 20104, 20047,

20046

20212, 20210, 20184, 20121,

20045, 20043

20105, 20104, 20066, 20054,

20047, 20046, 20042, 20037,

20035, 20000

20848, 20062, 20048

20072

20240

VCRs and DVRs

Brand

Singer

Sonic Blue

Sony

Stack 9

STS

Sylvania

Symphonic

Systemax

Tagar Systems

Tatung

Teac

Technics

Teknika

Thomas

Tivo

TMK

Toshiba

Code

20072

20616, 20614

21972, 21032, 20636, 20035,

20034, 20033, 20032, 20000

21972

20042

21593, 20593, 20110, 20081,

20043, 20035, 20000

21593, 20593, 20000

21972

21972

20041

20041, 20000

20162, 20035

20037, 20035, 20000

20000

21503, 20739, 20636, 20618

20240, 20208, 20036

21972, 21503, 21008, 20212,

20210, 20209, 20066, 20045,

Totevision

Touch

Unitech

Vector

Vector Research

Video Concepts

Videomagic

Videosonic

Viewsonic

Villain

Voodoo

Wards

20043

20240, 20037

21972

20240

20045

20040, 20038

20061, 20045, 20040

20037

20240

21972

20000

21972

20760, 20240, 20212, 20149,

20081, 20072, 20062, 20060,

20048, 20047, 20042, 20035,

20000

White Westinghouse 20637, 20209, 20072

XR-1000

Yamaha

Zenith

20072, 20035, 20000

20038

21139, 20637, 20479, 20209,

ZT Group

20039, 20034, 20033, 20000

21972

71

6

Using the TV with a Personal Computer

Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74

Video Adjustments

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74

Connecting a Computer to the TV

. . . . . . . . . . . . . . . . . . . . . . .

75

Adjusting Image Resolution

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

77

Computer Display Formats

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

78

74

Setup

Chapter 6. Using the TV with a Personal Computer

1. See the TV specifications in Appendix B to confirm that your computer video signal is compatible with the

TV.

2. Note whether the computer supplies a digital or analog video signal. You will need this information during the setup procedure.

• Digital video signal: Comes from the computer’s

DVI or HDMI output.

• Analog video signal: Comes from the computer’s

VGA 15-pin output and requires a VGA-to-DVI cable or a VGA cable and VGA/DVI adapter.

3. Power on the TV.

IMPORTANT

In the next step, select the correct video signal type (analog or digital) in the Input Name menu.

Otherwise, the TV will be unable to display a picture from the computer.

4. Press MENU to open the Main menu, highlight the Input

Name icon and press ENTER.

5. Highlight the PC-DVI text box and press to change the setting to match your computer’s video signal type, either Digital or Analog.

Video Adjustments

1. Power on the computer if it is not already on.

2. Select PC from the Input Selection menu. To do this, press INPUT to open the Input Selection menu, move the highlight to the PC icon, and press ENTER.

3. Change the resolution of the computer image. The goal is to maximize the computer resolution while maintaining a suitable aspect ratio for the image. See the explanation later in this chapter.

4. Perform TV video adjustments. Press VIDEO repeatedly to cycle through the video-adjustment options.

The following additional adjustments are available for computer video:

Auto Position. Press ENTER to automatically center the position of the PC video.

HorizPosition (Horizontal Position). Manually adjust the horizontal position of the PC. This selection overrides the Auto Position selection.

VertPosition (Vertical Position). Manually adjust the vertical position of the PC. This selection overrides the Auto Position selection.

Fine Detail (analog DVI-A signals only). Manually adjust the picture quality of the PC. This selection overrides the Auto Position selection.

5. Change the TV picture format to suit the image.

Press FORMAT to cycle through the available picture formats. See the chart later in this chapter showing how various computer resolutions are displayed on the TV.

Figure 1. Specify your computer’s video signal type

(analog or digital) in the Input Name menu.

6. Press EXIT to close all menus.

7. Connect the computer’s video output to the TV’s

PC-DVI jack. See the connection diagrams in this chapter to find the method best suited to your equipment.

8. Connect the computer’s audio output using one of these options:

• Connect analog left/right audio to the TV’s

PC -DVI AUDIO jack.

• If your computer offers digital audio output, connect it to a digital A/V receiver instead.

IMPORTANT

See Appendix B for signal compatibility.

To Remove the Computer Icon from the Input Selection Menu

When you disconnect an analog video connection of a personal computer, the computer icon remains in the

Input Selection menu until you remove it.

1. In the Input Name menu, highlight the PC DVI Input box.

2. Press to select Digital.

3. Press EXIT to close all menus.

The next time you open the Input Selection menu, the computer icon will no longer appear.

Note

• The PC-DVI input on the TV can accept either analog (DVI-A) or digital (DVI-D) signals.

• You must specify the PC-DVI setting in the Input

Name menu as either Analog or Digital, depending on the signal type sent by your computer.

• If your computer offers digital audio output, you can connect your computer’s digital audio out to a digital input on a digital A/V receiver.

Chapter 6. Using the TV with a Personal Computer 75

Connecting a Computer to the TV

Computer with DVI Monitor Output

Required: DVI-to-DVI cable, stereo audio cables

If the computer’s audio output is a single mini jack, a mini audio-to-RCA-male “Y” adapter cable is also required.

1. Connect the DVI-to-DVI cable from the computer DVI output to the PC-DVI jack on the TV back panel.

2. Connect the left (white) and right (red) audio cables from AUDIO OUT on the PC back panel to PC-

DVI AUDIO on the TV back panel.

Computer with HDMI Monitor Output

Required: HDMI-to-DVI cable or an HDMI cable with an

HDMI/DVI adapter, stereo audio cables

If the computer’s audio output is a single mini jack, a mini audio-to-RCA-male “Y” adapter cable is also required.

1. Connect the computer’s HDMI output to the TV’s

PC-DVI jack. Use either an HDMI-to-DVI cable or an

HDMI cable with an HDMI/DVI adapter.

2. Connect the left (white) and right (red) audio cables from the computer’s AUDIO OUT to PC-DVI

AUDIO on the TV back panel.

�������

�����

������

����

������

������

�����

�����������

���������

� �

��

������������������

�����������������������������������

�����

����������� ��������

����������

����

������

�����

�����

����������������

� �

��

�������

�����

�������

���

�����

����

�����

����

�����

�����

���

����

������

�����

�����

���������

� �

�������

�����

������

����

������

������

�����

�����������

������������������

�����������������������������������

�����������������������

�����������������������������

����������������������

������������������������

��

����������������

� �

��

�����

����

������

�����

����������� ��������

����������

�����

�����

�������

�����

�������

���

�����

����

�����

����

�����

�����

���

����

�����

������

�����

��

��

���������

�������

�����

���

�������������

����

�������

����

�������

�����

���

����������

��������

������������������

���������

� ���� �

�������

����

��

��

����������������

��

���������������������������������

����������

����

�����

��

Figure 2. Connecting a personal computer with DVI Monitor

Output

��

�����������������

�����������������������������������

��

Figure 3. Connecting a personal computer with an HDMI monitor output

76 Chapter 6. Using the TV with a Personal Computer

Connecting a Computer to the TV, continued

Computer with VGA 15-Pin Monitor Output

(Analog Video)

Required: 15-pin computer VGA-to-DVI/VGA-to-DVI-D cable or a VGA computer cable and a DVI/VGA adapter, stereo audio cable.

If the computer’s audio output is a single mini jack, a mini audio-to-RCA-male “Y” adapter cable is also required.

IMPORTANT

To use this connection, you must first select the

Analog setting in the PC DVI box of the Input

Name menu. See the “Setup” section for more.

. Connect the computer’s PC MONITOR OUT to

PC-DVI on the TV back panel. Use either a VGA-to-

DVI monitor cable or a VGA computer cable with a

VGA/DVI adapter.

2. Connect the left (white) and right (red) audio cables from the computer’s analog audio ouput to PC-DVI

AUDIO on the TV back panel.

�������

�����

������

����

������

������

�����

�����������

������������������

�����������������������������������

��������������������������������������������

�����������������������

�����������������������������

����������������������

������������������������

����������������

� �

�����

����

������

��

��

�����

�����������

��������

����������

�����

�����

���������

� �

�������

���

�����

����

�����

����

�����

�����

���

����

�����

������

�����

�������

�����

���

����������

��������

������������������

���������

� ���� �

�������

����

����������������

��������������������������������

Figure 4. Connecting a computer with a VGA 15-pin monitor output.

Chapter 6. Using the TV with a Personal Computer 77

Adjusting Image Resolution

Your Mitsubishi TV can display resolutions from standard

VGA (640 x 480) through 1920 x 1080 signals at a refresh rate of 60 Hz. Note that 1280 x 1024 and 1920 x 1080 signals are supported only for digital computer signals, and 1920 x 1080 at 24, 30, and 60 Hz. See Appendix B in this book for more on compatible screen resolutions.

When connecting a computer providing digital video, in most cases the computer will select the best resolution match to display on the TV. You can override this setting if you wish. For a computer providing analog video, you may need to set the resolution manually. The instructions below are for setting the resolution on most personal computers.

1. In the PC’s Start menu, select Settings.

2. Select Control Panel.

3. Select Display.

4. Choose the Settings tab.

5. Change the resolution to the highest resolution with the aspect ratio best suited for the image. See the table on the next page showing possible PC formats.

Depending on your computer’s operating system, adjust the resolution with either:

• the Screen area slider.

• the Screen Resolution slider

6. To change the refresh rate, click on the Advanced button.

7. On the Monitor tab, select a setting from the Screen refresh rate drop-down list. The resolution of 1920 x

1080 is supported at 24, 30, and 60 Hz; other resolutions are supported at 60 Hz.

You may need to restart the computer for this change to take effect.

NOTE: Whenever the TV is powered on, the lamp is in use, even if the TV screen appears dark. As a reminder that the TV is powered on and that time is being added to the lamp’s elapsed hours, set the computer’s screen saver to a pattern that will display after several minutes of inactivity.

��

��

��

�� ��

Figure 5. Computer resolution, XGA selection

��

78

Computer Display

Formats

Computer Signal

Format

VGA

640 X 480

WVGA

848 X 480

SVGA

800 X 600

WSVGA

1064 X 600

XGA

1024 X 768

Format

PC 720p

1280 X 720

WXGA

1365 X 768

(DVI-D signals only)

SXGA

1280 X 1024

(DVI-D signals only)

PC 1080p

1920 X 1080

(DVI-D signals only)

Format

Repeatedly press the FORMAT key to cycle through the TV displays available for your computer’s video signal.

As Displayed on TV Screen

16 X 9 Standard 4 X 3 Standard

Standard

Reduced

Zoom

Standard

7

Using IEEE 1394 Devices

Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

80

Recording to IEEE 1394 Recordable Devices

. . . . . . . . . . . . . . . .

82

The TV Remote Control and IEEE 1394 Devices

. . . . . . . . . . . . . .

84

A/V Discs

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

85

Switching Between Analog and Digital IEEE 1394 Outputs

. . . . . .

86

80 Chapter 7. Using IEEE 1394 Devices

Overview

Compatible IEEE 1394 Devices

Compatible A/V devices include some, but not all, cable boxes, D-VHS VCRs, A/V discs, and future products.

Some devices may have IEEE 1394 connectors but are not compatible with the TV. Areas of compatibility to consider are:

1. Digital Video Signals

The TV can decode MPEG2 video as provided by cable boxes and some camcorders. Many camcorders provide

DV video, which the TV cannot decode. Connect a DV camcorder to the TV using analog audio plus composite video, S-video, or component video, or use HDMI audio/ video. Other types of digital video, such as PC video provided by some computers, must be decoded by the source device and sent to the TV as analog video, S-video, or DVI/HDMI video.

2. Digital Audio Signals

When received with video signals, the TV can decode

Dolby Digital signals and MPEG audio signals. Other types of digital audio as provided by some digital recording devices, such as MP3 audio and DTS audio, cannot be decoded by the TV when received over IEEE 1394 connections.

The TV may not be able to pass incompatible digital audio signals on the coaxial digital audio output. These signals may pass to other devices, however, on the IEEE 1394 cable.

3. Digital Control Signal

The TV can serve as the control center for IEEE 1394 audio/video devices, such as VCRs, A/V Discs, tuners, cable boxes, and amplifiers that are compatible with the following IEEE 1394 control standards.

• EIA-775. Designed for tuning devices such as cable boxes, allowing the device to send simple graphics. This standard does not, however, allow the TV to control the cable box by IEEE 1394.

• AV/C (Audio Video Control). Designed to provide basic controls such as play, stop, channel selection, and volume, as appropriate for the device.

4-pin connector 6-pin connector 6-pin-to-4-pin adapter

If you wish to connect a 6-pin device to the TV (such as a camcorder), and the device is designed to receive electrical power from another 6-pin device, there are several ways to provide electrical power to the device:

• Connect the camcorder directly to the household AC.

• Use the camcorder’s battery for power.

• Connect the camcorder directly to another 6-pin device in the network that can provide power.

Connection Methods

There are two connection methods for IEEE 1394 devices. Use the method that fits your network of audio/video products.

Direct Device-To-Device Method

The IEEE 1394 interface allows you to chain devices, unlike audio and video connections that require you to connect each individual device directly to the TV. For example, you can connect your D-VHS to your 1394 A/V disc and then connect the 1394 A/V disc to the TV. The resulting IEEE 1394 chain allows you to add more devices to the chain. You will see an icon for each device in the

TV’s Input Selection menu and can also send information from any IEEE 1394 device to other compatible devices.

��

Hub Connection Method

���������

�������

����

The IEEE 1394 standard allows you to use the TV as a hub within the audio/video network. Each device can send information, which may include audio and video, to any other device in the network.

Four-Pin and 6-Pin Connections

There are two different types of connectors used for IEEE

1394 terminals and cables: a 4-pin and a 6-pin type.

Both types send the same digital audio, video, and control signals, but the 6-pin connectors can also supply lowvoltage electrical power to connected devices. This TV uses only 4-pin type connectors.

A 6-pin connector cannot be connected directly to a 4-pin jack, and vice versa. To connect a 6-pin device to a 4-pin device, use a 6-pin-to-4-pin adapter or adapter cable. These cables are available from electronics and computer stores.

�����

�������

��������

������

��

����

�������

�����������

�������

������

Chapter 7. Using IEEE 1394 Devices 81

Overview, continued

that has sub-units, a pop-up menu will appear to allow you to select the sub-unit you wish to use.

Tips for Connecting IEEE 1394 Devices

• Do not loop the last device in the chain back to the TV. When the device chain is looped, the TV may not be able to work with the other devices.

��

��������

����

�������

����

• Place devices that have only a mechanical (two-position) power switch at the end of the chain or leave the power switch in the on position. When turned off,

IEEE 1394 signals may not be able to pass through the device to other devices.

• Place devices with the slowest communication speed at the end of the chain. Sometimes the communication speed is marked near the IEEE 1394 connector with an “S” number. The higher the number, the faster the communication speed. This TV has a communication speed of s400. Devices with slow communication speeds can interfere with IEEE 1394 signals from faster devices. When setting up a digital recording between a faster device and a slower device, make the slower device the source and make the faster device the recorder.

• Use IEEE 1394 cables 15 feet or less in length between devices.

• This TV is an IEEE 1394a device. It can be used with an IEEE 1394b system when an IEEE-1394a-to-1394b convertor is used. 1394b systems are capable of greater distances and multi-room applications.

• The TV can recognize a maximum of seven IEEE 1394 devices at one time.

IEEE 1394 Devices and the Input Selection

Menu

Select an IEEE 1394 device to watch from the Input Selection menu just as you would any other device. See figure

3, Input Selection menu.

When you connect an IEEE 1394 device to the TV network and power it on, the new device is automatically detected.

Some non-audio/video or incompatible IEEE 1394 devices, such as personal computers (PCs), may not be detected by the TV and do not appear in the Input Selection menu. Such devices can, however, coexist and are still available to other devices on the IEEE 1394 network that are compatible with these non-audio/video devices.

Some devices may be a combination of two or more types of devices, such as a recording device that is also a tuning device. Each portion of the device is called a sub-unit.

When you select a device on the Input Selection menu

IEEE 1394 Amplifiers

For some IEEE 1394 MPEG2 amplifiers, you can use the

TV to control switching between the TV speakers and speakers connected to the amplifier.

1. Press INPUT to open the Input Selection menu. The screen will show an icon for a connected IEEE 1394 amplifier. See the Input Selection menu, figure 3.

2. Press AUDIO to move the highlight to the audio section.

3. Press to select either the TV speakers or the IEEE

1394 amplifier.

4. Press ENTER to select and hear the new audio source.

IEEE 1394 Camcorders

• Control Functions. Connect the camcorder to the

TV’s IEEE 1394 jack on the rear of the TV and test using the TV’s remote control to operate the camcorder. If your model does not operate properly, use the camcorder’s control buttons instead.

• MPEG Camcorder. If you are unable to play back over the IEEE 1394 interface, use the analog audio/ video connections described in chapter 2, “TV Connections.”

• DV Camcorder. Connect the camcorder using the analog audio and video connections described in chapter 2, “TV Connections.”

�������������

�������

�����

������

����

������

������

�����

�����������

�����

�����������

������������������

�����������������������������������

��

�����������������������

�����������������������������

����������������������

������������������������

����������������

� �

��

��

�����

����

������

�����

�����

���������

� �

�������

�����

���

����������

���������������������������

���������

� ���� �

��������

�������

����

�������

���

�����

����

�����

����

�����

�����

���

����

������

�����

�����

You can connect an IEEE 1394 camcorder with an IEEE

1394 cable or with analog audio/video cables. In either case, test using the TV’s remote control to operate the camcorder over the IEEE 1394 cable.

82 Chapter 7. Using IEEE 1394 Devices

Recording to IEEE 1394 Recordable

Devices

You can use the TV to control recording to IEEE 1394 devices. While recording, you can view a program on a different input or power off the TV. The following table lets you see what signals can be recorded to an IEEE 1394 digital VCR or A/V disc.

Recording

Availability

Can be recorded

Signal Type

Digital channels, including high-definition channels

TV Input

ANT 1, ANT 2

Digital signals, including high-definition signals

IEEE 1394 devices

Cannot be recorded

Analog channels ANT 1, ANT 2

Analog signals

Digital signals

INPUT 1-3,

COMPONENT 1 and 2

HDMI 1 and 2,

PC-DVI

Summary of signal inputs and recording to an IEEE 1394 digital VCR or A/V disc.

There are two ways to record digital content to an IEEE

1394 recordable A/V disc or DVCR:

• From the TV’s Recording Setup menu

• From the TV’s ChannelView™ channel guide

Immediate Recording from the Recording

Setup Menu

Recording Now from the Menu

1. Press (RECORD) to open the Recording Setup menu.

• Record To. If you have more than one recordable

IEEE 1394 device connected, use to select it from the list in the Record To box.

• Duration. Use to select a recording duration of from 30 minutes to six hours in 30-minute increments. The default is one hour.

3. Press a second time to start recording.

Time-Delayed Recording from the Menu

1. Ensure that TV Energy Mode is set to Fast Power On and the TV clock is set to the correct time and day.

See “Setup Menu” to make changes.

2. Press (RECORD) to open the Recording Setup menu.

3. Review the recording setup information. To change the source, recording device, or duration, follow the steps described above under “Recording Now.”

4. Specify when to start the recording.

• Start Time a. With the hour highlighted in gold characters, press to select the hour, including AM or

PM. Press ENTER to move the highlight to the minutes.

b. With the minutes highlighted, press to select the minutes.

• Day. Use to select a day of the week.

5. Select Add and press ENTER to add the recording to the Record List. A confirmation message will be displayed if your selection is successful. If you pick overlapping times, day(s), or destination devices, you will see a message stating there is a conflict.

6. While the Recording Setup menu is displayed, press

GUIDE to view a list of scheduled recordings and verify the addition of the recording to the Record List, figure

2.

7. From the Record List you can:

• Press GUIDE to return to the Recording Setup menu.

• Press EXIT to return to TV viewing,

Figure 1. The Recording Setup menu

2. Review the recording setup information. Move the highlight to each box you need to change.

• With the leftmost icon highlighted (the source), press to change the source input if needed.

• Channel. If the source is an antenna, select a memorized digital channel using , CH / , or enter the channel number from the remote control.

Figure 2. Record List screen. From the Record menu, press GUIDE to open the Record List to review or cancel scheduled recordings.

Chapter 7. Using IEEE 1394 Devices 83

Recording to IEEE 1394 Recordable

Devices, continued

Recording from the ChannelView™ Channel

Guide

ChannelView provides program listings, as sent by the broadcasters, for memorized channels on ANT 1 and

ANT 2. Press the GUIDE key while watching ANT 1 or

ANT 2 to view ChannelView listings and to set up immediate or future recordings as described here.

Immediate Recording from ChannelView

1. Press INPUT to open the Input Selection menu. Highlight an ANT 1 or ANT 2 program source and press

ENTER.

2. Press GUIDE to open the ChannelView channel guide for the current input.

3. Use to highlight the channel and program you wish to record from the list of channels.

4. Press (RECORD).

A red “R” temporarily displays next to the program listing to indicate the program will be recorded.

5. Press EXIT to return to TV viewing.

Time-Delayed Recording from ChannelView

Set Up the Recording

1. Ensure that TV Energy Mode is set to Fast Power On and the TV clock is set to the correct time and day.

See “Setup Menu” in chapter 4, “TV Menu Settings.”

2. Perform steps 1 and 2 described above.

3 Press to highlight the source channel you wish to record from.

4. Press to view a list of future programs on that channel.

5. Press to highlight a future program.

6. Press (RECORD).

A red “R” temporarily displays next to the program listing to indicate the program will be recorded.

You can schedule a maximum of 32 recordings.

7. Press EXIT to close the menu.

Confirm the Recording Setup

1. Press (RECORD) to open the Record menu.

2. Press GUIDE to open the Record List (figure 2) and view all scheduled recordings. Press CH / to page quickly through the list.

3. Verify that the program you wish to record appears in the list.

4. Press EXIT to close the menu.

Cancelling Recordings

To Cancel a Recording in Progress

1. Press INPUT to open the Input Selection menu.

2. Move the highlight to the source input icon. There is no need to press ENTER.

The Input Selection menu displays an icon for an active recording connection to a recordable IEEE 1394 device. See the IEEE 1394 connection icon in figure 3.

3. Press CANCEL. The connection icon will disappear to indicate termination of the recording connection.

4. Press EXIT to return to TV viewing.

Connection

Icon

Audio

Icons

Figure 3. The Input Selection menu displays specialized icons for IEEE 1394 devices. The audio icons are displayed only when an IEEE 1394 amplifier is connected.

To Cancel a Scheduled Recording

1. Press (RECORD) to open the Record menu.

2. Press GUIDE to open the Record List (figure 2) and view all scheduled recordings. Press CH / to page quickly through the list.

3. Highlight the program you wish to remove from the

Record List and press CANCEL.

4. Press EXIT to close the menu.

84 Chapter 7. Using IEEE 1394 Devices

The TV Remote Control and IEEE

1394 Devices

• For satellite receivers and cable boxes, you may also be able to use the numbers or other additional buttons.

• For an IEEE 1394 cable box or satellite receiver, you can also try using the CABLE/SAT position of the TV remote control to see if it can operate the device. If not, use the remote control that came with the device.

To Power On or Off a Compatible IEEE 1394

Device

1. Press INPUT to open the Input Selection menu.

2. Move the highlight to the icon for the device. There is no need to press ENTER.

3. Press POWER.

4. Press EXIT to return to TV viewing.

Operation of IEEE 1394 Devices with the TV’s Remote Control

(slide switch set to TV position)

Device

Remote Control Key

CABLE/SAT A/V DISC

POWER

CH /

VOL /

MUTE

0-9 (DIGITS)

QV

EXIT

ENTER

CANCEL

GUIDE

DVCR

AMPLIFIER

(some MPEG2 models only)

Power the device on/off when highlighted in the Input selection menu. See the instructions above.

Channel up/down

Page up/down

(when track list is displayed)

Index search forward/reverse

(if supported by DVCR)

Volume Up/Down

Mute On/Off

Number functions

Search by time

(when followed by ENTER)

Last Channel Recall

Exit menus/displays Exit menus/displays

Enter or select Enter or select

Cancel function Delete recording from Track List

Exit menus/displays

Enter or select

Cancel function or counter reset

Digital-channel guide

(may need to press twice)

Display Track List.

Up/down/left/right

Skip to beginning or end of program

Up/down in track list

Skip Backwards 12 seconds during playback

Skip Forward 30 seconds during playback

Up/down/left/right

PLAY

STOP

Play

Stop

Play

Stop

RECORD Record Record

Reverse picture scan or Slow Play Reverse or Slow Play REV

FFWD

PAUSE

Fast picture scan or Fast Play

Pause

Fast Play

Pause

Chapter 7. Using IEEE 1394 Devices 85

A/V Discs

A/V Disc Track List Screen

When viewing an A/V Disc:

• Press GUIDE to display its Track List (see figure below).

• Press or to navigate through the Track List.

• To play a track, select it on the list, then press ENTER.

• Press INFO to view details for a highlighted track.

• To move through listings quickly, press PAGE / .

• To delete a track, highlight it and press CANCEL.

Figure 4. A/V Disc Track List screen

A/V Disc Search by Time

While playing an IEEE 1394 A/V disc you can search to a specific time in the recording.

1. Start playing the desired track on the A/V disc.

2. Use the number buttons to enter the time code position of hours followed by minutes. For example, to enter one hour and twenty-two minutes (1:22) into the track, enter 1, 2, 2.

3. Press ENTER to skip to the time code position. To cancel the request or to start over, press CANCEL instead of ENTER.

Copying A/V Disc Recordings

Tracks you record to disc may have copy restrictions assigned to them. To learn a track’s copy status, highlight the track in the Track List and press INFO. Tracks are assigned one of these ratings:

Copy Free

(or no status shown)

Copy Never

No copy restrictions apply.

The track cannot be transferred to another recording device. Tracks of this type may have an assigned retention period. See below for more information.

Retention Period

Some COPY NEVER tracks have a retention period assigned by the content provider. The retention period is the length of time you can keep and view the recording. The initial retention period, if any, is shown next to the copy status in the Track List INFO display (see figure 4).

To check how much time remains of the retention period, start viewing the recording and press INFO.

Note: The retention period for all tracks on the disc expires if there is any loss of power to the TV, even momentary. For example, expiration of the retention period will occur if you:

• Unplug the TV from the AC power source.

• Experience a power outage or power fluctuation.

Remember that you can safely turn off TV power using the POWER button without affecting the retention period.

To Copy a Track to Another IEEE 1394 Device

1. Press INPUT on the remote control and press to select the source A/V disc. Press ENTER to open the

Track List.

2. Press or to select a track. Then press ENTER to start playback.

3. Press (PAUSE) to pause playback.

4. Press (RECORD) on the TV remote. The Record menu will display.

5. In the Record To section, review the destination device (A/V Disc, DVCR). Change if necessary.

6. Set the duration to the length of the original track or longer.

7. Press a second time to start recording.

86 Chapter 7. Using IEEE 1394 Devices

Switching Between Analog and

Digital IEEE 1394 Outputs

To enable switching between analog and digital outputs, you must have check marked the Analog Connection box when the New 1394 Device screen displayed when you first connected the device. See the section “Before

You Begin” in chapter 2, “TV Connections.”

Figure 5. The ClearThought Auto Input sensing screen for IEEE 1394 devices. Place a check in the Analog

Connection box if your device has both analog and digital outputs.

1. Press INPUT to display the Input Selection menu.

2. Highlight the icon for the IEEE 1394 device and press

ENTER.

3. Press to switch between icons representing the analog and digital outputs of the device. See figure

6.

Figure 6. The Input Selection menu shows icons for the analog and digital outputs of the IEEE 1394 device.

4. Press ENTER to select the device output.

Appendices

Appendix A: Bypassing the Parental Lock

. . . . . . . . . . . . . . . . .

89

Appendix B: Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

91

Appendix C: Lamp Cartridge Replacement

. . . . . . . . . . . . . . . . .

93

Appendix D: Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . .

95

Appendix A: Bypassing the

Parental Lock

Appendices 89

Bypassing the Parental Lock

After you set the lock, you must use your pass code to view a locked program, view the locked TV, cancel the lock, or enter the Parental Lock menus.

If you forget your pass code, you can view the locked

TV without entering your pass code. When you are prompted for your pass code, press the number 9 and QV buttons on the TV remote control at the same time. This process temporarily unlocks the TV

When entering the Parental Lock menu, this process deletes your old pass code and prompts you to enter a new pass code.

• You can either enter a new pass code to open the

Parental Lock menu and make changes or press EXIT to close the menu.

• If any of the locks are turned on and you exit the menus when prompted for a new code, the old code and all lock settings are retained.

• If all locks are turned off and you exit the menus when prompted for a new code, then the previous code is erased.

IMPORTANT

Cut along the dotted line and file bypass instructions in a safe place for future reference.

IMPORTANT

When changing or deleting your pass code, you must use the remote control included with this TV. You cannot use a Mitsubishi remote control from another component or a

“universal” remote.

90

This page intentionally left blank

Appendix B: Specifications

Picture Technology

Projection System

Lamp

DLP, 0.65” chip, 1920 x 1080 pixels with Smooth Picture™

150-watt VIP type

Reception

Channel Frequency Reception

Channel Type*

Over-the-Air: VHF 2–13, UHF 14–69

Analog Cable: 1–125

Digital Cable: 1–135

Over the Air:

Cable:

Analog NTSC, Digital ATSC with sub-channels (all 18 video formats)

Analog NTSC (non-scrambled)

Digital QAM 64 and 256 with sub-channels (non-scrambled)

CableCARD™:

(WD-57731,

WD-65731)

Authorized scrambled and non-scrambled digital channels

* Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster or cable company and can vary from the standard frequency number. If there is no channel-number information provided by the broadcaster or cable company, the

TV creates a channel number. The created channel number uses the frequency number as the main channel number and the program number as the sub-channel number. When using an authorized CableCARD, the channel numbers are determined by the cable company.

Inputs

Description

Antenna/Cable input

HDMI (digital video/audio)

Video/S-Video

(one front, two rear)

Component Video (Y/Pr/Pb)

Qty.

2

2

3

2

Signal Type

RF

HDMI EIA-861B standard for digital audio and video

NTSC 480i only

EIA-770.1 & EIA 770.2

480i, 480p, EIA 770.3

720p and 1080i (video standards)

Input Specifications

F connector, 75-ohm

HDMI standard connector

Video: 60 Hz: 480i, 480p, 720p, 1080i

24 Hz, 30 Hz, 60 Hz: 1080p

Audio: PCM stereo

Note: Not for use with personal computers.

Video: RCA Pin Plug, 1.0 V p-p, 75 ohm

S-Video: Four-Pin DIN Plug

Y: 1.0 Vp-p 75-ohm

C: 0.286 Vp-p (burst signal), 75-ohm

RCA Pin Plug (EIA-770.3 Standard Levels and

Timing)

Y:

Pr:

1.0 Vp-p (includes sync), 75-ohm

700 mV p-p, 75-ohm

Pb: 700 mV p-p, 75-ohm

Audio Inputs

PC DVI-I Input

8 pairs analog left and right audio

1 analog and digital computer video

(not for use with other audio/video products) digital video only

RCA Pin Plug 500 mV (full scale), 43-k ohm

VGA (640 x 480, 60 Hz)

W-VGA (848 x 480, 60 Hz)

SVGA (800 x 600, 60 Hz)

W-SVGA (1064 x 600, 60 Hz)

XGA (1024 x 768, 60 Hz)

1280 x 720, 60 Hz

SXGA (1280 x 1024, 60 Hz)

1920 x 1080 (24 Hz, 30 Hz, 60 Hz)

WXGA (1360 x 768, 60 Hz)

92

Appendix B: Specifications, continued

Outputs

Description

Video

Audio (Signal)

Audio (Speakers)

Digital Interfaces

Digital Audio Output

IEEE 1394 (input/output)

(2 rear)

Qty.

Output Specifications

1

Video: RCA Pin Plug 1.0 Vp-p, 75-ohm

Signal Type: NTSC 480i only

2 pairs

RCA Pin Plug, 500 mV rms + 200 mV (full scale) for analog sources, 1.5

Vrms + 0.5 Vrms (full scale) for digital sources.

2 5.5" x 2.2"

1 RCA Pin Plug, Signal Type, Dolby Digital, PCM

2 IEEE 1394 Four-Pin-Type Terminal, S400

Physical Characteristics and Power Consumption

Model

Height

Dimensions (inches)

Width

WD-52631

WD-57731

WD-65731

33 5/16

36 3/16

40 3/4

47 1/8

51 1/2

58 1/2

Depth

17 1/8

17 15/16

19 13/16

Weight

77.5 lbs.

85.8 lbs.

99.0 lbs.

Power Consumption

250 w

250 w

250 w

IEEE 1394 System Compatibility

• This television is designed to conform to IEEE 1394 AV/C Software standards in effect at the time of development.

This networking and control technology is designed to provide high-performance digital connections and product control, making the product easier to use.

• Mitsubishi D-VHS VCRs are fully compatible with this TV in audio, video, and control.

• As other manufacturers distribute products that use the IEEE 1394 AV/C standards, they will be responsible for developing products that meet the standards of the technology, as well as compatibility testing with other products.

Mitsubishi cannot be responsible for their efforts, and therefore cannot promise compatibility with these other products. Any compatibility problems with other manufacturers’ products should be brought to the attention of those manufacturers.

HDMI

The HDMI input is compliant with EIA-861B standards for standard, extended, and high-definition video; digital audio, and HDCP copy protection. The HDMI inputs on this TV are not intended for use with personal computers or devices outputting video signals with computer resolutions.

Appendix C: Lamp Cartridge Replacement

CAUTION

BURN DANGER!

During normal operation, the surfaces inside the TV near the lamp are extremely hot.

TOUCH THE LAMP CARTRIDGE BY THE HANDLE ONLY

Do not touch the glass parts of the lamp cartridge.

CAUTION: If the television is on, press POWER to turn it off. Unplug the television and allow it to cool for at least one hour before attempting to replace the lamp cartridge.

Lamp Life

The light source for this television is a lamp, which is part of a lamp cartridge assembly. The life of the lamp can vary, based on the lamp itself, the air temperature around the TV while it is operating, and your viewing patterns. Warmer air or poor ventilation shorten the lamp life, as does turning the television on and off frequently. Mitsubishi warrants the lamp for one (1) year from the date of original purchase at retail. It is likely that the lamp will last much longer than this.

To Order a New Lamp

To Receive a Replacement Lamp Under Warranty

Call (800) 553-7278. Please have model number, serial number, and TV purchase date available.

Important: All lamps replaced under warranty must be returned to Mitsubishi where they will be inspected for defect verification.

To Purchase a Replacement Lamp After Warranty

Visit our website at www.mitsuparts.com or call (800) 553-7278. Order the new lamp part number shown below.

WARNING

• Do not remove the lamp cartridge immediately after turning off the television. You may get burned because the lamp is very hot. Allow the television to cool for at least one hour before replacing the lamp cartridge.

• Do not remove the lamp cartridge except when replacing it. Careless treatment can result in injury or fire.

• Do not touch the lamp glass element. It may be very hot and break, causing injuries or burns.

• Be sure not to insert any metal or flammable object into the lamp cartridge opening, as it may cause fire or electrical shock. If a foreign object is inserted into the opening, unplug the AC cord of the TV and contact your dealer for service.

• Install the lamp cartridge securely. Failure to do so may cause a fire.

• Do not touch the lamp glass elements. Oils from your fingers may cause premature lamp failure.

Hg = MERCURY

THE LAMP INSIDE THIS PRODUCT CONTAINS MERCURY AND MUST BE RECYCLED OR

DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance at www.eiae.org

94 Appendices

Appendix C: Lamp Cartridge Replacement, continued

WARNING

THE COVER IS PROVIDED WITH AN INTERLOCK TO

REDUCE THE RISK OF EXCESSIVE ULTRAVIOLET

RADIATION. DO NOT DEFEAT ITS PURPOSE

OR ATTEMPT TO SERVICE THE TV WITHOUT

REMOVING THE COVER COMPLETELY.

Handle

(step 5)

Figure 1.

Removing the Old Lamp Cartridge

1. Turn off TV power and allow the lamp to cool for at least one hour before proceeding.

2. After the lamp has cooled, remove the cover. Refer to figure 1. Use a #2 (large) Phillips screwdriver to remove the two screws securing the cover. Keep the screws and cover for re-installation

3. With a large flat-blade screwdriver, loosen the two shiny screws securing the lamp cartridge until they disengage from the mating threads. These are captive screws and cannot be separated from the lamp cartridge.

4. Fully open up the bag supplied with the replacement lamp and set the opened bag aside.

5. Gently grasp the handle of the lamp cartridge and pull the old cartridge straight out. See figures 1 and 2.

CAUTION: Do not tilt or rotate the cartridge, as small glass fragments may fall out.

6. Without tilting or putting down the lamp cartridge, insert it into the opened bag. Close the bag while being careful not to let any glass particles fall out.

Installing the New Lamp Cartridge

1. Do not touch the glass parts of the new lamp cartridge. Insert the new cartridge into the TV using the following guidelines: a. Refer to figures 3 and 4 and note the location of the top and bottom guides inside the lamp compartment and the corresponding grooves on the top and underside of the lamp.

b. Hold the lamp cartridge level with the lamp compartment, oriented as shown in figure 5.

c. Align the grooves on the cartridge with the top and bottom guides in the lamp compartment. See figure 5.

Guides inside the lamp compartment

Figure 3

Figure 4

Grooves are on the top and underside of the lamp cartridge

Figure 2 d. Carefully push in the cartridge until it is fully seated. If the cartridge does not slide in smoothly, gently wiggle the handle from side to side while pushing in.

Guide in lamp compartment

Figure 5

2. With either your fingers or the screwdriver, gently tighten the two shiny screws. If using a screwdriver, use only two fingers for final tightening. AVOID OVER-

TIGHTENING!

3. Replace the plastic cover and retaining screws.

4. WASH YOUR HANDS THOROUGHLY, AS THIS LAMP

CONTAINS MERCURY.

Disposal of the Old Lamp Cartridge

Lamp under warranty: All lamps replaced under warranty must be returned to Mitsubishi. Use the return shipping label provided and send to Mitsubishi Digital Electronics,

America, 1001 Cherry Drive, Suite 2, Braselton, GA 30517.

IMPORTANT: Lamps found to be without defect will be returned and charged back to the sender.

Lamp no longer under warranty: Contact your local authorities or the Electronic Industries Alliance at www.eiae.com for lamp-disposal or recycling instructions.

Do not dispose of the old lamp with common trash.

Appendix D: Troubleshooting

Appendices 95

TV Reset Functions

You can resolve many common TV problems using the reset functions described in the following table. See also the additional troubleshooting suggestions later in this appendix.

IMPORTANT

Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the same input before changing settings. If most other channels from the same input seem correct, there is likely a problem with the broadcast rather than with the TV. Use care in this case, as changes you make to fix problems on individual channels also affect all other channels on the same input.

Reset Name

Demo Mode

Turn-Off

Format

PerfectColor™

Reset

(for the single input currently being watched)

A/V Memory

Reset

(for the single input currently being watched)

A/V Reset

(for all inputs)

Channel

Memorization

When to Use How to Use

To turn off the retail demo mode slide show.

When the picture shape seem incorrect, use

FORMAT to change the shape of the picture.

1. While viewing the TV, press MENU to display the TV Main menu with the

Setup icon highlighted.

2. Press ENTER to display the Setup menu.

3. When the Setup menu is displayed, use to highlight the Demo Mode Off button and press ENTER.

Press the FORMAT key to cycle through the available formats to find the best format for the current picture.

Resulting Action

The demo mode will be turned off.

The Demo Mode Off button in the setup menu will turn gray and be unselectable. The demo mode slide show cannot be turned on again.

The last-used format for a signal type is memorized for each input.

The next time the same input and the same signal type is viewed, the last-used format will be recalled.

When the color intensities seem out of balance, use the PerfectColor reset to reset the color balances to the original factory settings.

1. While viewing the input to be reset, press VIDEO repeatedly to cycle to the

PerfectColor™ option.

2. Press ENTER to display the PerfectColor menu.

3. Press CANCEL to reset the colors.

When audio and/or video settings for a single input seem incorrect, use A/V

Memory Reset to return the input to the original factory settings.

1. While viewing the input to be reset, press menu.

MENU to display the TV Main

2. Use to highlight the Audio/Video icon and press ENTER.

3. When the Audio/Video menu is displayed with the AV Memory Reset text box highlighted, press ENTER to reset.

4. Press EXIT to exit the menu.

All PerfectColor sliders are reset to the original center position.

The PefectColor settings for other inputs remain unchanged.

All Audio and Video settings for the individual input are reset except for the Listen To, Language, audio

Balance, and Closed Caption settings.

To reset audio and video adjustments for all inputs to the original factory settings.

While viewing the TV, press the front panel buttons GUIDE and FORMAT at the same time.

All Audio and Video settings are returned to the original factory settings, including Listen To and

Language, plus Closed Captions settings and Format settings .

To erase and rememorize channels on

ANT 1 or ANT 2.

1. While viewing the TV, press MENU to display the TV Main menu with the

Setup icon highlighted.

2. Press ENTER to display the Setup menu.

3. When the Setup menu is displayed, use

to highlight the antenna and reception mode button and press ENTER to start memorization.

All previously memorized channels for the selected antenna input are erased and a new set of memorized channels is created. To add or delete individual channels, see the Channel Menu instructions in chapter 5, “TV Menu Settings.”

96 Appendices

Appendix D: Troubleshooting, continued

Reset Name

Parental Lock

Pass Code

When to Use

To change your Parental

Lock Pass Code

How to Use

This information is listed on the cutout page in

Appendix A. Please refer to that page.

Resulting Action

Allows a new code to be established.

Front-Panel Lock

Release

System Reset

To re-enable the frontpanel controls after activation of the Front-

Panel Lock

If the TV does not turn on or off, does not respond to the remote control or front panel buttons, or has audio but no video.

• When Energy Mode is set to Fast

Power On, press and hold the MENU button on the front panel for over eight seconds.

• When Energy Mode is set to Low

Power, press POWER on the front panel to turn on the TV. Press and hold the MENU button on the front panel for over eight seconds.

Press the SYSTEM RESET button on the front panel with a pointed object such as the point of pencil or end tip of a paperclip.

Allows the front panel to be unlocked if the remote control is misplaced.

The TV will turn off and the green LED will flash quickly for about one minute.

When the green LED stops flashing, you may turn on the TV. The changes you made most recently, before using

SYSTEM RESET, may be lost. Changes you made previously, however, are not lost.

TV Reset

IMPORTANT:

Use this reset only if all other resets have been unsuccessful.

To reset all consumeraccessible settings and all memories to the original factory defaults.

CAUTION: All ownerperformed setups and adjustments will be erased.

1. While viewing the TV, press MENU to display the TV Main menu.

2. With the Main menu displayed, press number keys 1 2 3 to display the

Reset Menu.

3. READ THE ON SCREEN WARNING

AND INSTRUCTIONS.

• If you do not wish to use this reset, press EXIT or MENU to back out.

• If you do wish to use the reset, press ENTER to erase all memories and settings.

The TV will start the initialization process. The TV will then turn off and the front green LED will start flashing. When the LED stops flashing, you can turn the TV on again. The Parental Lock Access code will remain unaffected, but all other memories and settings outlined in this Owner’s Guide will need to be set again.

Service and Support

Service

If you are unable to correct a problem with your TV, consult your Mitsubishi dealer or Mitsubishi Consumer

Relations at (800) 332-2119.

• DO NOT adjust any controls other than those described in this Owner’s Guide.

• DO NOT remove the protective back cover of your

TV.

Support

• To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides, visit our website at www.mitsuparts.com or call (800) 553-7278.

• For questions:

Call Consumer Relations at 800-332-2119.

E-mail: [email protected]

Website: www.mitsubishi-tv.com

Important

All lamps replaced under warranty must be returned to Mitsubishi where they will be inspected for defect verification.

Appendix D: Troubleshooting, continued

General TV Operation

2.

Symptom

1.

A fan is running even while the TV is powered off.

The TV remote control does not work.

Remarks

Normal TV operation. When the TV is off, internal components continue to draw power and must be cooled by the fan.

• Check that the batteries are fresh and installed correctly.

• Check that the slide switch is set to TV.

• Be no more than 20 feet from the TV when using the remote control.

• Program the remote control to operate the TV or other device

(see chapter 5).

• Reset the remote control. See chapter 5.

Replace the batteries.

3.

When I try to use the remote control, the POWER key blinks five times.

4.

TV does not respond to the remote control or to front panel control and TV will not power on or off.

5.

When a device is selected from the Input Selection menu, the screen is blue (no signal source).

6.

Devices are grayed out in the Input Selection menu or the Split Screen Input Selection menu.

Use the System Reset button.

• Make sure the selected device is turned on.

• Begin play of the VCR.

• A recording is in progress. Cancel the recording to select the device.

• Digital channels, IEEE 1394 digital devices, and PCs cannot display in the Split Screen sub-picture.

7.

You have forgotten your Parental Lock pass code. See Appendix A, Bypassing the Parental Lock.

8.

Rating restrictions are not working.

Open the Parental Lock menu and:

• Verify that the U.S. Ratings or Other Ratings setting is On.

• Check the Lock Time/Unlock Time to check if rating restrictions are disabled.

• Rating restrictions apply only to content on ANT 1 and ANT 2,

INPUT 1–3, and IEEE 1394 inputs.

Normal TV operation.

9.

On-screen displays appear each time you change a function.

10. Cable provider needs information to start

CableCARD™ service.

On the remote control, press MENU and then enter the numbers

999 to display the Host ID and CableCARD™ ID information.

TV Channels

1.

Symptom

The TV takes several seconds to respond to channel changes.

Remarks

• It is normal for digital channels to take longer to tune in.

• Press ENTER after a channel number to avoid delays.

• Use a 4-digit number for an over-the-air digital channel.

• Use a 6-digit number for digital cable channels if your cable service is able to recognize 6-digit channel numbers.

2.

You cannot access a channel.

• Use number keys instead of CH / .

• Be sure the channel you want to view is in memory. See

“Channel Menu” in chapter 4, “TV Menu Settings.”

• Check that the TV is turned to the correct device or antenna for that channel by pressing the INPUT button.

• Make sure the Parental Lock is off.

• If you cannot tune to a virtual digital channel even though the TV has already memorized digital channels, tune to the actual channel number used by the broadcaster. The virtual channel will then be automatically added to memory.

3.

Name options are not available for some channels. Only memorized analog channels can be named.

4.

When ChannelView™ list is displayed, information appears incomplete

Available information is sent from the broadcaster or cable provider. No other data is available.

98

Appendix D: Troubleshooting, continued

TV Power On/Off

1.

2.

Symptom

TV takes an excessively long time to power on.

You cannot program the TV to turn on automatically (Timer function)

3.

The TV will not turn on after being plugged in.

4.

TV turned itself off and the light on the front panel started to blink.

5.

TV will not power off.

Remarks

• When switched on, the TV needs time to boot up, just as a computer does. The TV’s lamp also requires a few moments to heat up to full brightness.

• TV Energy Mode is set to Low Power. To change TV Energy

Mode to Fast Power On: Press MENU, open the Setup menu, highlight the Fast Power On radio button.

• The TV may be locked.

• The clock may not be set.

• A time-delayed recording may have started.

• TV Energy Mode is set to Low Power. Change to Fast Power

On in Setup menu.

If green light on front panel is blinking, wait for at least one minute for the light to turn off, then press POWER again.

• Momentary power fluctuation caused the TV to turn off to prevent damage. Wait for the green light to stop flashing and turn the TV on again.

• If the TV does not stay on, use the System Reset button on the front panel. If this happens frequently, obtain an AC line power conditioner/surge protector.

• An unusual digital signal may have been received, triggering a protection circuit. Wait for the light to stop flashing and turn TV on.

Use the System Reset button.

Picture

1.

2.

Symptom

Picture does not look like a high-definition picture.

Picture has become noticeably dimmer.

Remarks

Not all signals are high-definition signals. To receive high-definition programming from your cable or satellite provider, you must subscribe to the provider’s high-definition service. Some overthe-air broadcasts are in high-definition and can be received with a high-quality antenna suited to your location.

• Adjust picture brightness and contrast to maximum levels.

• The lamp is nearing the end of its life. Order a new lamp. See

Appendix C for ordering information and replacement instructions.

3.

Split Screen does not display a sub-picture.

• Make sure the Parental Lock is off.

• Not all inputs can be displayed as a sub-picture.

CableCARD allows only one channel at a time to be used.

4.

CableCARD channel is not shown as Split

Screen sub-picture when CableCARD channel is the main image.

5.

There is a large black or gray rectangle on the screen.

The TV’s analog closed captioning has been set to “text” mode in the Captions menu. Turn off because there is no text information being broadcast.

Check your VCR’s owner’s guide for further troubleshooting. 6.

You cannot view a picture when playing a

VHS tape.

7.

VCR or DVD player’s on-screen menus jitter up and down.

Possible cause: Many VCRs and DVD players provide on-screen menus at only half-resolution. These lower-resolution graphics may appear to jitter up and down when the TV converts them to high-definition graphics.

Appendix D: Troubleshooting, continued

Picture

Symptom

8.

When viewing a stopped VCR, white lines are rolling on the screen.

9.

Screen is black when trying to view digital channels or IEEE 1394 device.

10. DVCR analog/digital problems.

Remarks

• Turn off video mute for the VCR.

• Begin playing the tape.

• Change the VCR input to the antenna input.

The PerfectColor™ color balance has been incorrectly set. Press

VIDEO repeatedly until you see the PerfectColor option and press

ENTER to open the PerfectColor ™ menu.

If the tape is currently playing but no picture displays, there may be a mismatch of the media with the display. Press INPUT to display the Input Selection menu. Press ENTER for the DVCR device. If digital is selected, try analog, or if analog is selected, try digital.

Indicators

1.

Symptom

Lamp indicator light is a constant red.

2.

Lamp indicator light is a flashing yellow.

3.

Status indicator light is a steady yellow.

4.

Status indicator light is a steady/flashing red.

Remarks

Turn the TV off for at least 2 minutes. Turn it back on. If light is still red, the lamp has failed. Replace it. See Appendix C for lamp replacement information. For questions, call Mitsubishi

Consumer Relations at 800-332-2119.

Lamp cover door is open or lamp cartridge is not secure. See

Appendix C for lamp replacement information.

Room temperature has exceeded proper levels. Cool the room.

Service is required. Contact your dealer or a Mitsubishi Authorized Service Center to arrange for a service evaluation. Listings of Mitsubishi Authorized Service locations can be obtained from our web site, www.mitsubishi-tv.com or by calling 1-800-332-

2119.

Sound

1.

Symptom

There is no sound even when the volume is turned up.

2.

The sound does not match the screen picture.

Remarks

• Check if the MUTE button is on.

• The TV’s “Listen to:” setting may be set to SAP.

• Check that the TV Speakers setting is On in the Audio/Video menu.

• If using an IEEE 1394 amplifier, check audio source in Input Selection menu.

• Use the SYSTEM RESET button to perform system reset.

• The TV’s Listen to: setting may be set to SAP.

• If using stereo or A/V receiver speakers, check their input selection.

• If using stereo or A/V receiver, check that AUDIO OUT LEFT/

RIGHT on TV’s back panel is connected to the A/V receiver.

100

Appendix D: Troubleshooting, continued

IEEE 1394 Recording

Symptom Remarks

1.

Program to be recorded was correctly selected from ChannelView, however, incorrect program was recorded.

The broadcaster supplied program information that was incorrect and/or was changed after a recording was added to the Record

List.

2.

Incomplete ChannelView program recorded. Recording device may lack sufficient blank space to make a full recording.

3.

ChannelView program recording failed.

4.

Cannot record to or from the IEEE 1394 device, including dubbed recordings.

• Connection and compatibility issues with IEEE 1394

(FireWire®) digital devices. This may include too many

Firewire devices in use at one time, or the recording device not understanding the record command.

• Television lost power long enough to lose current clock time.

• TV energy Mode was set to Low Power. Change TV Energy mode to Fast Power On. Press MENU, open the Setup menu, highlight the Fast Power On radio button, press ENTER.

• To initiate a recording to IEEE 1394 device, press the

(RECORD) key. The Record menu displays allowing setup of the recording.

• The source device for the recording is not powered on.

• When dubbing, the destination device for the recording is not powered on.

• The wrong medium (analog tape for digital recording, or digital tape for the analog recording) is in the device.

• The program is copy protected.

• The program has already been recorded once and the copy protection only allows one recording.

• Unapproved source device for copy protected material.

• The recording device can not decode the copyright signal included in the signal source (try another device if available).

• The playing device (for dubbing) does not support copyrighted material.

• Source for recording is copyrighted

• Too many IEEE 1394 devices in network. Insufficient bandwidth available. Disconnect unused devices.

• Source Device has higher speed (S 400) than record device.

If possible, reverse devices, play in the slower device and record in the faster device.

IEEE 1394 Devices

1.

Symptom

Excessive digital artifacts appear when viewing an IEEE 1394 device.

2.

D-VHS recordings for digital cable have drop-outs (loss of picture or sound), or no playback.

Remarks

• The IEEE 1394 cable is too long; 15 feet between devices is the maximum.

• There may be a slow device in the middle of the IEEE 1394 network. Move the slow devices to the end so that connections for faster devices do not pass through them.

Digital cable signals on IEEE 1394 can exceed the data rate standards supported by DVCR.

Appendix D: Troubleshooting, continued

IEEE 1394 Devices

3.

4.

Symptom

There is no audio and video from the IEEE

1394 device.

The IEEE 1394 Device is no longer listed in the Input Selection menu.

5.

The IEEE 1394 device cannot be selected (is grayed out).

6.

7.

MENU button does not display a menu.

All IEEE 1394 devices disappear.

Remarks

• The device is not turned on. Turn the device power on.

• No media (tape or disc) is inserted into the device.

• The media is blank (has no recording).

• The play command failed - Try pressing play again on the device’s remote control or front panel.

• The device is already in use (for example, the device is currently recording).

• The source is copy-protected or violates copy protection.

• The device’s digital video signal is not supported by the TV, as may be the case with an IEEE 1394 signal from a computer. Use analog connections instead, if available.

• The device is not an audio/video device.

• Too many other devices are already communicating over IEEE

1394. Remove or stop some devices and try again.

• The IEEE 1394 plug is disconnected or loose.

• The IEEE 1394 device has not been powered on. Turn on.

• The device has not been discovered.

• The device is not an audio/video device

• The device may be busy with a recording. Cancel the recording.

• You have connected more than seven IEEE 1394 devices.

Unplug the eighth device and one other device. Plug the eighth device back in.

• The IEEE 1394 device does not provide a menu.

• The TV cannot support IEEE 1394 menus.

• The connected devices must not be in a loop that returns to the TV. Make sure a device is connected at the end.

• Disconnect all the cables and devices from the TV. Replace them one by one to locate the problem device or cable.

• Use System Reset (front control panel).

The device has been disconnected. Plug it in.

8.

Cannot rediscover a deleted IEEE 1394 device.

9.

An IEEE 1394 device has been plugged in but does not appear in the Input Selection menu (not discovered).

10. Cannot view video from an IEEE 1394 DV camcorder.

11. An IEEE 1394 device is not responding properly.

• The IEEE 1394 connection to the TV or another device is not secure or is loose.

• The IEEE 1394 device is not powered on.

• A device in the IEEE 1394 chain is not powered on. Turn on all the devices.

• The device discovery can take as long as a minute to initiate.

• IEEE 1394 cable is too long (maximum of 15 feet between devices).

• The IEEE 1394 device uses an incompatible protocol and will not be discovered

Use analog connections for video and audio. You can still use the

IEEE 1394 connection for control functions, however.

• Unplug the device’s power cord. Wait at least ten seconds and plug it in again.

• Some IEEE 1394 devices are not supported by the TV because of incompatible standards.

102

Trademark and License Information

LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS,

IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT

NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE.

CableCARD™ is a trademark of Cable Television Laboratories, Inc.

CompactFlash® and CF are trademarks of the CompactFlash Association.

DCR™ Certification Logo is a trademark of the Consumer Electronics Association.

Digital Light Processing™ and DLP™ are trademarks of Texas Instruments.

Manufactured under license from Dolby Laboratories. Dolby is a trademark of Dolby Laboratories.

DTVLink™ Certification Logo is a trademark of the Consumer Electronics Association.

Firewire® is a trademark of Apple Computer, Inc. registered in the U.S. and other countries.

HDMI™ the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited pay-per-view uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly prohibited.

This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.

MultiMediaCard™ is trademark of Infineon Technologies and licensed to the MultiMediaCard Association.

The logo and the words “Simplay™” and “Simplay HD™” are the trademarks of Silicon Image, Inc.

XBox™ is a trademark of the Microsoft Corporation.

ChannelView™, ClearThought®, NetCommand®, PerfectColor™, QuickView™, ViewPoint® are trademarks of

Mitsubishi Digital Electronics America, Inc.

Mitsubishi TV Software

END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE

IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and

Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”).

By utilizing this television and Software, you agree to be bound by the terms of this License Agreement.

The Software is protected by United States copyright laws and international treaty provisions, as well as other intellectual property laws and treaties. The Software is licensed, not sold.

1. LICENSE GRANT. MDEA grants you a non-exclusive, non-transferable, limited right and license to use one copy of the Software only with the Mitsubishi television model that included this owner’s guide and owned by you.

2. RIGHTS AND LIMITATIONS.

Software Not for Resale. You may not resell or otherwise transfer for value the Software, except in conjunction with a sale of the TV that

Software has been pre installed.

Prohibition on Reverse Engineering, Decompilation and Disassembly. The Software contains trade secrets or other proprietary material in its human perceivable form and to protect them, you may not reverse engineer, decompile, or disassemble, or otherwise reduce the

Software to any human perceivable form, except to the extent that the foregoing restriction is expressly prohibited by applicable law.

Separation of Components. The Software is licensed as a single product. Its component parts may not be separated for use on more than one TV.

No Rental. You may not rent, lease, lend, or sublicense the Software.

Trademarks. This License Agreement does not grant you any rights to any trademarks of MDEA.

3. VIOLATIONS. You understand that any use, copying or transfer of the Software, except as permitted pursuant to this License, may subject you to serious criminal and civil penalties including damages and an award to MDEA of attorneys’ fees in connection with any violation of this License. You further understand that you may be held legally responsible for any copyright infringement or other violation of intellectual property rights that is caused, encouraged, or induced by your failure to abide by the terms of the License. This license is effective until terminated, and will terminate immediately without notice from MDEA or judicial resolution if you fail to comply with any provision of this License.

4. COPYRIGHT. All title and intellectual property rights in and to the Software (including but not limited to any images, photographs, animations, video, audio, music, text, and “applets” incorporated into the Software), and any accompanying printed materials are owned by or licensed to MDEA. All title and intellectual property rights in and to the content which may be accessed through use of the

Software is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This License Agreement grants you no rights to use such content, except that you own the media on which the Software is recorded, but MDEA and its licensors retain ownership of the Software itself. All rights not expressly granted are reserved by MDEA.

5. EXPORT RESTRICTIONS. MDEA is licensing the Software for use within the United States. You agree that you will not export or re-export the Software. You specifically agree not to export or re-export the Software: (i) to any country to which the U.S. has embargoed or restricted the export of goods or services, which currently include, but are not necessarily limited to Cuba, Iran, Iraq,

Libya, North Korea, Sudan, and Syria, or to any national of any such country, wherever located, who intends to transmit or transport the

Software back to such country; (ii) to any person or entity who you know or have reason to know will utilize the Software in the design, development, or production of nuclear, chemical, or biological weapons; or (iii) to any person or entity who has been prohibited from participating in U.S. export transactions by any federal agency of the U.S. government. You warrant and represent that neither the BXA nor any other U.S. federal agency has suspended, revoked, or denied your export privileges.

6. DISCLAIMER OF WARRANTY. EXCEPT AS OTHERWISE PROVIDED IN THIS LICENSE OR IN THE LIMITED WARRANTY

APPLICABLE TO THE TV, MDEA MAKES NO OTHER WARRANTIES OF ANY KIND WHATSOEVER REGARDING THE SOFTWARE

AND HEREBY EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, WITH

RESPECT TO THE SOFTWARE. ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED BY MDEA. IN

NO EVENT SHALL MDEA BE LIABLE TO YOU OR ANY THIRD PARTIES, IN CONTRACT, IN TORT OR OTHERWISE, FOR ANY

DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE. BECAUSE SOME

JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES, THE ABOVE LIMITATION MAY

NOT APPLY TO YOU.

7. LIMITATION OF LIABILITY. MDEA SHALL NOT, UNDER ANY CIRCUMSTANCES BE LIABLE TO YOU OR ANY THIRD

PARTIES FOR ANY DAMAGES OF ANY NATURE, WHETHER INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR

OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOST PROFITS, LOSS OF GOOD WILL OR EXPENDITURES

MADE OR COMMITTED FOR IN RELIANCE ON THE CONTINUATION OF THIS LICENSE. YOU AGREE THAT NEITHER MDEA’S

BREACH OF THIS LICENSE NOR ITS FAILURE TO REPAIR A DEFECT, ERROR OR BUG SHALL CONSTITUTE A FAILURE OF THE

ESSENTIAL PURPOSE OF THIS LICENSE. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. MDEA’s liability to you for direct damages for any cause whatsoever and regardless of the form of the action, will be limited to the money paid by you for the TV (based on fair market value of the TV) that caused the damages.

8. GENERAL. This License Agreement will be governed by the laws of the State of California.

WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

104

Mitsubishi DLP™ Projection Television Limited Warranty

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a. Parts. The lenticular (i.e. front picture) screen is warranted against defects in materials and workmanship for a period of thirty (30) days from the date of the original purchase at retail. The lamp and all other parts (except any software incorporated into this television) are warranted for a period of one (1) year from the date of the original purchase at retail. We will repair or replace, at our option, any defective part without charge for the part. Parts used for replacement may be replaced with those of like kind and quality and may be new or remanufactured. Parts used for replacement are warranted for the remainder of the original warranty period.

b. Embedded Software. MDEA warrants that all software incorporated into this television set (the “Embedded Software”) will perform in accordance with the functional description of Embedded Software in all material respects, but

MDEA does not warrant that the Embedded Software is error-free. MDEA also does not warrant that the Embedded

Software will be compatible under IEEE 1394 AV/C and HAVi software standards with products produced by any other manufacturer. The limited warranty contained in this section shall continue for a period of one (1) year from the date of the original purchase at retail. If, after prompt notice within the warranty period, MDEA determines that the Embedded

Software has failed to perform in accordance with such functional description in all material respects and if such failure is not due to accident, misuse, modification or misapplication of the Embedded Software, then MDEA shall modify or replace the nonconforming Embedded Software at no charge to you, which at MDEA’s sole discretion may be fulfilled by means of modification or replacement software contained on a replacement memory card for Customer installation.

The foregoing shall be MDEA’s sole obligation to you under this limited warranty. All rights under this limited warranty on the Embedded Software also subject to your acceptance of and compliance with the terms of the Software License

Agreement applicable to this television, and this limited warranty on the Embedded Software shall be null and void if the

Embedded Software is modified or changed in any manner except as specifically authorized by MDEA.

c. Labor. For thirty (30) days after the original purchase at retail, we will repair or replace, at our option, the lenticular screen if it proves defective. For certain items that are designed to be replaced by the consumer, including (but not limited to) some Embedded Software, the consumer is solely responsible for any replacement labor. For all other parts, we will provide the labor for a warranty repair by an authorized MITSUBISHI service center without charge for one (1) year from the original date of purchase at retail.

d. Notice. To obtain warranty service, you must notify an authorized MITSUBISHI service center of any defect within the applicable warranty time period.

e. This DLP Projection Television uses a single DLP chip to create the screen image. This technology creates the image using small dots, or picture elements (pixels). Your DLP Projection TV is manufactured to a high level of performance and quality, in fact, 99.99% perfect in the number of properly functioning pixels. As in other display technology, sometimes a pixel is continuously active, inactive or the incorrect color. Our standard is clear; MDEA warrants only that the percentage of properly functioning pixels will be not less than 99.99% of all pixels.

BEFORE REQUESTING SERVICE, please review the instruction booklet to insure proper installation and correct customer control adjustment. If the problem persists please arrange for warranty service.

1. TO OBTAIN WARRANTY SERVICE: a. Contact your nearest authorized MITSUBISHI service center, whose name and address can be obtained from your

MITSUBISHI dealer, by writing at the address provided below, calling MDEA at the 800-332-2119, or by using the support feature of our website at www.Mitsubishi-tv.com.

b. Warranty service will be provided in your home or, if required, at an authorized service shop, provided that your television is located within the geographic territory customarily covered by an authorized MITSUBISHI service center. If not, you must either deliver your television to an authorized service location at your own expense, or pay for any travel and/or transportation costs the service center may charge to and from your home. Actual service labor will be provided without charge.

c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER

REGISTRATION CARD IS NOT A CONDITION OF COVERAGE UNDER THIS LIMITED WARRANTY. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you.

d. To obtain a replacement lamp, order the lamp directly from the MDEA Parts Department at (800) 553-7278.

2. THIS LIMITED WARRANTY DOES NOT COVER: a. Up to .01% pixel outages (small dot picture elements that are dark or incorrectly illuminated).

b. Damage to the lenticular screen or Fresnel lens, screen frame, cosmetic damage or to any other damage where such damage is caused by unauthorized modification, alteration, repairs to or service of the product by anyone other than an authorized MITSUBISHI service center; physical abuse to or misuse of the product (including any failure to carry out any maintenance as described in the Owner’s Guide including air filter cleaning or any product damaged by excessive physical or electrical stress); any products that have had a serial number or any part thereof altered, defaced or removed; product use in any manner contrary to the Owner’s Guide; freight damage; or any damage caused by acts of God or other factors beyond the reasonable control of MDEA, such as power surge damage caused by electrical system or lightning. This limited warranty also excludes service calls where no defect in the product covered under this warranty is found, service calls related to unsatisfactory audio or visual reception or signal unless caused by a defect in the product that is covered under this limited warranty, all costs, expenses or any other damages arising from product installation, or set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharpness), other adjustment necessary to prepare the unit for display or use, connection with any external audio receiver, antenna, cable or satellite systems, or service of products purchased or serviced outside the U.S.A. Please consult the operating instructions contained in the Owner’s Guide furnished with the product for information regarding user controls.

3. ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION,

MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY

LIMITED TO A TERM OF ONE YEAR.

4. UNDER NO CIRCUMSTANCES SHALL MDEA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY

INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY,

BREACH OF CONTRACT, OR OTHERWISE.

5. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental, special, or consequential damages, so the above limitations or exclusions may not apply to you.

6. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.

9351 Jeronimo Road

Irvine, CA 92618-1904

106

Index

Index

A

A/V Discs 85

A/V Memory Reset. See Reset

A/V Receiver

Connecting 31

A/V Reset. See Reset

Adjust Keys (Up/Down/Left/Right)

34, 44

Anamorphic Picture Format

DVD Definnitions 38

Antenna

Adjusting and the Signal Strength

Meter 49

Connecting 27

Antenna Inputs (ANT 1/MAIN, ANT

2/AUX) 18

Audio/Video Menu 45, 57

Audio Settings 58

Auto Input Sensing 22

B

Back Panel (illustrated) 18, 19

Batteries. See Remote Control

C

CableCARD™ 13, 17, 18, 46

Cable Box and the Remote Control 34, 62

Connecting 25, 29, 32

IEEE 1394 80

Camcorder

Connecting (Analog) 32

DV (Digital Video) 81, 101

IEEE 1394 Camcorders 81

Power 80

Captions Menu 45, 51

Channels. See also FAV and TV Timer 47

Changing 14

Digital Channel Numbers 91

Memorizing 46

Naming 49

Status Display 37

ChannelView™ Channel Listings 36

Channel Menu 45, 49

Cleaning 7

ClearThought® Auto Input Sensing

22

Clock, Set Date and Time 46

Closed Captions. See Captions Menu

Color Adjustments 59

Component Inputs (Y Pb Pr) 19, 58

Computer. See Personal Computer

Connection Types 23

Copy Restrictions 85 and Status Display 37

D

Date. See Clock

Daylight Savings Time 46

Digital Audio Out 19

Display Format Definitions 38

Dolby Digital 19, 31, 92 and IEEE 1394 80

DTVLink™ 19

DV 81

DVDs and the Remote Control 34, 62 and V-Chip Ratings 56

DVD Player with Component Video,

Connecting 31

DVI Device, Connecting 30

DVI Jack (for Personal Computer) 19

E

Energy Mode 47

F

Fan Noise 6

Fast Power On (Energy Mode) 47

FAV 50

Film Mode 57

FireWire®. See IEEE 1394

Freeze Picture. See Pause

Front Panel Lock 53

G

GUIDE Key (button) 34

H

HDMI

HDMI Device 30

HDMI Inputs 12

HDMI Jack 58

HDMI Jack, Description 19

Personal Computer with HDMI

Output 75

Remove the Icon for an HDMI

Device 48

HDTV Receiver with Component

Video, Connecting 25

HD (High-Definition Signal) 38

I

Icon Order Menu 45, 48

IEEE 1394 Devices and Analog Outputs 22, 86 and Recording 82 and Status Display 37

Compatible IEEE 1394 Devices

80

Connecting IEEE 1394 Devices

81

HAVi Amplifiers 58, 81

Inputs on TV 19

TV Connection Speed 81

INFO Key Status Display 37

Input Jacks on TV (Standard Audio/

Video) 18, 58

Input Name Menu 45, 48

Input Selection Menu

Remove the Computer Icon from the Input Selection Menu 74, 75

Remove the Icon for an HDMI

Device 48

L

Lamp Cartridge Replacement 93

LAMP Indicator. See LED Indicator

Lights

Language

Audio Setting (Digital Channels)

58 for TV Menus 46

LED Indicator Lights

LAMP Indicator 16

POWER/TIMER Indicator 16

STATUS Indicator 16

Troubleshooting 99

Lock TV. See Parental Lock

Low Power (Energy Mode) 47

M

Memorizing Channels 46

MONITOR OUT Jacks 19

MP3 Audio 80

Mute

Audio and Closed Captions 51 and status Display 37

MUTE key 34

Video Mute 57

N

Noise Reduction (Video) 59

P

Parental Lock

Bypassing 89

Front Panel Lock 53

V-Chip Ratings 56

Pass Code

Resetting 89

Setting 53

PAUSE Key 34

PerfectColor 59

Personal Computer 81 and Display Formats 38

Connecting 75

Remove the Computer Icon 74,

75

Setup 74

Picture Quality and Connection Types 24 and Film Mode 57

Troubleshooting 98

Power Consumption 47, 92

Power On/Off 14, 98

Q

QV (QuickView™) 34

R

Recording and MONITOR OUT Jacks 19 and Split Screen 19

Cancelling Recordings

IEEE 1394 devices 83

Recording Setup Menu and IEEE 1394 Devices 82

RECORD Button 100

Record List and IEEE 1394 Devices 82

Signals Available for Recording

23

Remote Control

Batteries 35

Keys and Functions 34

Programming Codes (reference chart) 64

Programming Instructions 63

Reset 35, 64

Reset

A/V (all settings) 15

A/V Memory (for individual devices) 57

DVCR Counter 84

Pass Code 89

PerfectColor 59

Remote Control 35, 64

Summary Table 95

System Reset Button 15

S

S-Video

Connecting 25

Connector Illustration 24

Safeguards 8

SAP (Second Audio Program) 58

Satellite Receiver and the Remote Control 62

Connecting 25

SD (Standard-Definition Signal) 38

Search A/V Disc. See A/V Discs

Service and Support 96

Setup Menu 45, 46

Signal Definitions 38

Sleep Timer 35

Speakers, Turning TV Speakers On or

Off 57

Specifications, TV 91

Split Screen and Recording from MONITOR

OUT 19

Description 40

Stand, TV 6

Standard-Definition Signal 38

Status Display 37

STATUS Indicator. See LED Indicator

Lights

Stereo System. See A/V Receiver

System Reset 15, 96

T

3:2 pulldown 57

Time. See Clock

Timer (TV Timer) 47

Time Zone. See Clock

Troubleshooting 95

V

VCR

Connecting 18, 28, 29

IEEE 1394 80

Troubleshooting 99

Video Noise Reduction 59

Video Settings 59

Viewing Device. See Input Selection

Menu

W

Wall Outlet Cable 26

Index 107

Website:

www.mitsubishi-tv.com

E-mail:

[email protected]

For questions, call Consumer Relations at

800-332-2119

To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides

Visit our website at www.mitsuparts.com

or call

800-553-7278

Demo Mode

This TV has a demo mode for use in retail stores.

Demo mode causes the TV to display a series of screens outlining the TV’s features.

To turn off demo mode:

1. Press MENU.

2. When the Main menu appears with Setup highlighted, press ENTER.

3. When the Setup menu opens, press to highlight the on-screen Demo Mode Off button.

4. Press ENTER.

System Reset

If the TV does not respond to the remote control, front panel controls, or will not power on/off, press the SYSTEM RESET button on the front panel with a pointed object, such as the point of a pencil or end tip of a paperclip.

The green LED will flash quickly for about one minute. When the green LED stops flashing, you may turn on the TV.

© 2006 Mitsubishi Digital Electronics America, Inc.

853B542B10

Written and Printed in U.S.A.

V33

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals