Transferring IEEE1394 (i.LINK)-DV standard data connections. Samsung D303(i), D307(i), D305(i), D303D(i), VP-D301(i)

Add to My manuals
113 Pages

advertisement

Transferring IEEE1394 (i.LINK)-DV standard data connections. Samsung D303(i), D307(i), D305(i), D303D(i), VP-D301(i) | Manualzz

00752F VP-D303(i)-UK (62~110) 5/28/04 9:56 AM Page 79

ENGLISH

IEEE 1394 Data Transfer

Transferring IEEE1394 (i.LINK)-DV standard data connections

Connecting to a DV device

✤ Connecting with other DV standard products.

■ A standard DV connection is quite simple.

If a product has a DV port, you can transfer data by connecting to the DV port using the correct cable.

!!! Please be careful since there are two types of DV ports, (4pin, 6pin). This camcorder has a 4pin terminal.

✤ With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images to be transferred.

Connecting to a PC

✤ If you want to transmit data to a PC, you must install a IEEE 1394 add-on card onto the PC. (not supplied)

✤ The frame rate recorded for video capturing is dependent on the capacity of the PC.

Notes

When you transmit data from the camcorder to another DV device, some functions may not work.

If this occurs, please reconnect the DV cable or turn the power OFF and ON again.

When you transmit data from the camcorder to PC, PC function button is not available in M.PLAY mode.

Do not use the camcorder and IEEE1394 together as this will cause IEEE1394 to shut off.

00752F VP-D303(i)-UK (62~110) 5/28/04 9:56 AM Page 80

ENGLISH

IEEE 1394 Data Transfer

● System requirements

CPU : faster Intel ® Pentium III™ 450Mhz compatible.

Operating system : Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)

Main memory : more than 64 MB RAM

IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable (VP-D301i/D303i/D303Di/D305i/D307i only)

1. Set the power switch to PLAYER mode.

2. Connect the DV cable (not supplied) from the DV IN/OUT port of the camcorder to the DV IN/OUT port of the other DV device.

■ Make sure that DV IN appears on the screen.

3. Press the START/STOP button to begin REC PAUSE mode.

■ PAUSE is displayed on the OSD.

4. Start playback on the other DV device while you monitor the picture.

5. Press the START/STOP button to start recording.

■ If you want to pause recording momentarily, press the START/STOP button again.

6. To stop recording, press the (STOP) button.

USB

DV

Notes

When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded pictures will not be affected.

Operations are not guaranteed for all the recommanded computer environments mentioned above.

advertisement

Related manuals

advertisement

Table of contents