AA68-03583A-01Eng_SEA 6/14/05 2:14 PM Page 6
Y
O U R
N
E W
T V
Familiarizing Yourself with The TV
Front Panel Buttons
The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.
TX-R2728G
TX-R2734G
TX-R2735G
Œ MENU
Press to see an on-screen menu of your TV's features.
´ VOL – and +
Press to increase or decrease the volume.
Also used to select items on the on-screen menu.
ˇ CH ( ▼) and CH (▲)
Press to change channels. Also press to highlight various items on the on-screen menu.
¨ Remote Control Sensor
Aim the remote control towards this spot on the
TV.
English - 6
ˆ TIMER indicator
When the TV is turned on, the TIMER indicator blinks five times. This indicator illuminates when the TIMER mode is set to the “On” position after setting the clock and either the On timer or Off timer, with the remote control. Even if the power is turned off, this indicator stays lit. (Clock must be set before using this function.)
Ø POWER
Press to turn the TV on and off.
AA68-03583A-01Eng_SEA 6/14/05 2:14 PM Page 7
Y
O U R
N
E W
T V
Connection Jacks (Side)
You can connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see page 18.)
TX-R2728G TX-R2734G / TX-R2735G
Œ AUDIO INPUT jacks
Used to connect the audio signals from a camcorder or video game.
´ VIDEO INPUT jack
Used to connect a video signal from a camcorder or video game.
ˇ SUPER VIDEO INPUT jack
S-Video signal from an S-VHS VCR or DVD player.
Note: In S-Video mode, Audio Output depends what kind of audio input source is connected to the side audio input jacks (AV2).
• Please be sure to match the color coded input terminals and cable jacks.
English - 7
AA68-03583A-01Eng_SEA 6/14/05 2:14 PM Page 8
Y
O U R
N
E W
T V
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 10 – 17.
Œ VIDEO Input
Video signals from VCRs, DVD players and similar devices.
´ AUDIO Input
(INPUT1 and 2) /
COMPONENT AUDIO Input
(INPUT 2)
Audio signals from VCRs, DVD players and similar devices.
Use these jacks to connect the audio signals from a DVD player when using the DVD video input jacks. When not using the DVD jacks, these audio jacks function as audio for Video 2 or S-VIDEO.
¨ S-VIDEO Input
S-Video signal from an S-VHS VCR or DVD player.
Note: In S-Video mode, Audio Output depends what kind of audio input source is connected to the side audio input jacks (AV2).
ˆ COMPONENT VIDEO Input
Connect video from a DVD player.
Note: Only black and white signals are output from a monitor in DVD mode.
Ø VHF/UHF
Connect to an antenna or to a cable TV system.
ˇ AUDIO-VIDEO MONITOR
Output
These audio-video signals are identical to A/V signals being displayed on the big screen.
(Typically used as the input signals for a recording
VCR.)
English - 8
AA68-03583A-01Eng_SEA 6/14/05 2:14 PM Page 9
Y
O U R
N
E W
T V
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV.
Œ POWER
Turns the TV on and off.
´ Number buttons
Press to select channels directly on the TV.
ˇ +100
Press to select channels over 100.
For example, to select channel 121, press “+100,” then press “2” and “1.”
¨ MUTE
Press to temporarily cut off the sound.
ˆ VOL
-
, VOL
+
Press to increase or decrease the volume.
Ø SLEEP
Press to select a preset time interval for automatic shutoff.
∏ MENU
Displays the main on-screen menu.
” MTS (Multichannel
Television Stereo)
Press to choose stereo, mono or
Separate Audio Program (SAP broadcast).
’ PRE-CH
Tunes to the previous channel.
˝ TV/VIDEO
Press to display all of the available video sources (i.e., Antenna/Cable,
VCR).
Ô CH and CH
(Channel Up/Down)
Press CH channels.
or CH to change
INFO
Press to see the time, channel, etc., on-screen. Also press to exit
(quit) the menu system.
Ò EXIT
Press the menu to exit.
Ú ▲,▼,œ,√ / ENTER
Press to select highlight up, down, left, or right. While using the onscreen menus, press ENTER to activate (or change) a particular item.
Æ R.SURF
Press the R.SURF button to automatically return to a preferred channel after a user-preset time delay.
ı CH SCAN
Not available.
˜ TURBO
Press to turn the TURBO sound On or Off.
English - 9