AA68-03583A-01Eng_SEA 6/14/05 2:15 PM Page 24
O
P E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH (…) and
CH (†) buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER button
Channel
Auto Program
Add/Delete : Deleted
Name : ----
Move Enter Return
2
Press the
▲ or ▼ button to select “Air/CATV”, then press the ENTER button
Channel
Auto Program
Add/Delete : Deleted
Name : ----
Move Adjust Return
3
Repeatedly press the through these choices:
“Air” (antenna) “STD”,
“HRC” or “IRC” (all cable
TV)
Press the EXIT button to exit.
Channel
Auto Program
Add/Delete : Deleted
Name : ----
Move Adjust Return
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that exists in your particular area.
English - 24
AA68-03583A-01Eng_SEA 6/14/05 2:15 PM Page 25
O
P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (Air, STD,
HRC, IRC). See steps 1~3 on previous page.
Channel
Auto Program
Add/Delete : Deleted
Name : ----
Move Adjust Return
2
Press the
▲ or ▼ button to select “Auto Program” and then press the ENTER button.
The “Auto Program” is automatically displayed.
Channel
Auto Program
Add/Delete : Deleted
Name : ----
Move Enter Return
3
Press the ENTER button to start "Auto Program".
The TV will begin memorizing all of the available channels.
After all the available channels are stored, the
Channel menu reappears.
Press the MENU button to skip and press the ENTER button to stop.
Press the EXIT button to exit.
Auto Program
Air 3
Start
Enter Return
The TV automatically cycles through all of the available channels and stores them in memory.
This takes about one to two minutes.
Auto Program
Air 5
Stop
Enter Return
English - 25
AA68-03583A-01Eng_SEA 6/14/05 2:15 PM Page 26
O
P E R AT I O N
Adding and Erasing Channels (Manual Method)
First, press the CH (…) or CH (†) button or the number buttons to select the channel you want to add or delete.
1
Press the MENU button to display the menu.
Press the
▲ or ▼ button to select “Channel”, then press the ENTER button.
Channel
Auto Program
Add/Delete : Deleted
Name : ----
Move Enter Return
2
Press the
▲ or ▼ button to select “Add/Delete”, then press the ENTER button.
Channel
Auto Program
Add/Delete : Deleted
Name : ----
Move Enter Return
3
Press the
▲ or ▼ button to select “Added” or
“Deleted” then press the
ENTER button.
Press the EXIT button to exit.
Auto Program
Add/Delete
Name : ----
Channel
Move Enter Return
English - 26