Advanced operations. Sony DPF V700, DPF-V900/V700, DPF-V700, S-FRAME DPF-V700, DPF-V900, DPF V900
Below you will find brief information for Digital Photo Frame DPF V900, Digital Photo Frame DPF V700. These digital photo frames support various memory cards (Memory Stick, CompactFlash, SD, xD-Picture Card), allowing easy image display from your digital camera or other devices. Enjoy slideshows, single image viewing, and various display modes (clock, calendar). Connect to a high-definition TV for larger screen viewing. Transfer images wirelessly via Bluetooth (optional adapter required).
Advertisement
Advertisement
Advanced operations
AUTO TOUCH-UP
What is AUTO TOUCH-UP?
AUTO TOUCH-UP is a feature for performing the following four corrections automatically at the same time. It is not possible to adjust the level for each of the corrections manually.
Skin smoothing: Automatically recognizes face parts, and adjusts the skin tone for a smoother look.
Backlight correction: Adjusts the brightness by using the face detect function.
Focus correction: Improves the focus of an out-offocus image to create a better-focused image.
Red-eye correction: Automatically detects faces and corrects red-eye caused by the flash.
1
Display the image you want to correct as single image display.
2
Press MENU.
The menu is displayed.
3
Press v/V to select [AUTO TOUCH-
UP] and then press .
Correction of the selected image begins and then the image before correction appears on the left and the corrected image appears on the right.
Note
Depending on the image, it may take a while for the correction.
4
Press v/V to select [Save] and then press .
The corrected image is saved as a new image.
To return to the original image
(image before correction)
Select [Cancel] and then press .
Tips
• The original image is the same as it was before correction.
• The corrected image is saved in the same device as the image before correction.
• To perform this operation from the photo frame, press MENU, press the direction buttons to select the item, and then press ENTER.
Notes
• Depending on the image, the faces of people may not be able to be detected automatically.
• Depending on the image, focus correction may not be able to be performed properly. Focus correction is not effective for blurring caused by shaking of the camera.
• Depending on the image, red-eye correction may not be possible.
The automatic red-eye correction of this photo frame uses the technology of FotoNation Inc. in the U.S.A.
The skin smoothing correction of the photo frame uses the technology of Ichikawa Soft Laboratory.
27 GB
Specifying the playback device
You can specify the memory card or external device to be displayed.
1
Press MENU.
The menu is displayed.
2
Press v/V to select [Select device] and then press .
The screen for selecting a device is displayed.
Tip
Insert the device at this procedure if no device is inserted.
3
Press v/V to select the device you want to display and then press .
The images of the selected device are displayed.
Tip
To perform this operation from the photo frame, press
MENU, press the direction buttons to select the device you want to display, and then press
ENTER.
Adjusting the image size and position
Enlarging an image
1
To enlarge an image, press
(zoom in) on the remote control. To reduce an enlarged image, press
(zoom out).
Each press of the button enlarges the image further. You can enlarge an image to maximum 5 times the original scale.
You can move an enlarged image up, down, left, and right.
Notes
• Enlarging an image may reduce the quality depending on the image size.
• It is not possible to enlarge an image with buttons on the photo frame.
Rotating an image
1
Press (rotation) on the remote control.
Each press of the button rotates the image
90 degrees counter-clockwise.
To perform the operation from the menu of the remote control
1
Press MENU.
The menu is displayed.
28 GB
2
Press v/V to select [Rotate] and then press .
The Rotate menu is displayed.
3
Press v/V to select the direction to rotate and then press .
•
•
:
Rotates the image 90 degrees clockwise.
:
Rotates the image 90 degrees counterclockwise.
4
Press v/V to select [OK] and then press .
Tip
To perform this operation from the photo frame, press
MENU, press the direction buttons to select the item, and then press ENTER.
Note
An enlarged image cannot be rotated.
Adding to the internal memory
You can use the photo frame as the digital album with saving important images in the internal memory.
Tip
In [Image file size] of the menu, you can preset whether to optimize the size of images or save images as is without compressing them when you save them to the internal memory.
1
Press (add to album) on the remote control.
The Add to album menu is displayed.
Single image display
Slideshow display
Continued
29 GB
Index image display
Tips
• To perform this operation from the menu, press MENU on remote control, press v/V to select [Add to album], and then press
.
• Images in the internal memory cannot be added to the album.
2
Press v/V to select [This image],
[Selected images] or [All images] and then press .
[This image]: Adds the image currently displayed. (This item cannot be selected on the slideshow display.)
[Selected images]: Adds the selected images from the index display.
[All images]: Adds all images in the device displayed.
[Selected images] shows the images in the device which are currently displayed as index view.
If you select [This image] or [All images], go to step 4 to complete adding the image to the internal memory.
3
If you selected [Selected images], choose the image you want to add.
1 Press B/b/v/V to select the image to add to the album and then press .
Check mark will be placed on each selected image.
Repeat this operation to add multiple images at the same time.
To cancel the selection, select images to cancel and then press to delete check mark.
2 Press MENU.
The confirmation screen whether to save or not to the internal memory is displayed.
4
Press v/V to select [Yes] and then press .
The image is saved to the internal memory.
30 GB
Exporting an image
You can export the images of the internal memory to a memory card or external device.
1
Press MENU.
The menu is displayed.
2
Press v/V to select [Export] and then press .
The Export menu is displayed.
To cancel the selection, select images to cancel and then press to delete check mark.
2 Press MENU.
The screen for selecting the device to which to export is displayed.
5
Press v/V to select the device to which to export the image and then press .
3
Press v/V to select [This image],
[Selected images] or [All images] and then press .
[This image]: Exports the image currently displayed or the image chosen at the index view. (This item cannot be selected on the slideshow display.)
[Selected images]: Exports the selected image from the index display.
[All images]: Exports all images in the album.
Selecting [Selected images] shows the index display of images in the album.
If you select [This image] or [All images], go to step 5 to select the device to which you want to export.
4
If you selected [Selected images], specify the image to export.
1 Press B/b/v/V to select the image you want to export and then press .
Check mark will be placed on each selected image.
Repeat this operation to export multiple images at the same time.
6
The confirmation screen is displayed after exporting is finished, and then press .
The image is copied to the specified device.
Note
Do not turn off the power or remove the memory card or disconnect the external device during exporting.
Doing so may damage the photo frame or memory card, or damage the data.
Tip
To perform this operation from the photo frame, press
MENU, press the direction buttons to select the item, and then press ENTER.
31 GB
Deleting an image
1
Press MENU.
The menu is displayed.
2
Press v/V to select [Delete] and then press .
The Delete menu is displayed.
3
Press v/V to select [This image],
[Selected images] or [All images] and then press .
[This image]: Deletes the image currently displayed.
[Selected images]: Deletes the selected image from the image list.
[All images]: Deletes all images in the device displayed.
[Selected images] shows the images in the device which are currently displayed as index view.
If you select [This image] or [All images], go to step 5 to confirm the operation.
4
If you selected [Selected images], specify the image to delete.
1 Press B/b/v/V to select the image to delete and then press . Check mark will be placed on each selected image.
Repeat this operation to delete multiple images at the same time.
To cancel the selection, select images to cancel and then press to delete check mark.
2 Press MENU.
The delete confirmation screen is displayed.
5
Press v/V to select [Yes] and then press .
The image is deleted.
Tip
To perform this operation from the photo frame, press
MENU, press the direction buttons to select the item, and then press ENTER.
32 GB
Format of internal memory
When you use [Format internal memory] in
[Various settings] menu, you can format the internal memory.
Note
On slideshow display, you cannot delete the images.
Change the display mode to single image display or index image display.
Changing the various settings
Setting procedure
You can change display, slideshow, brightness, language, and other settings of the photo frame.
It is also possible to reset the settings to their factory defaults and format the intenal memory.
Note
Only internal memory can be formatted.
1
Press MENU.
The menu is displayed.
2
Press v/V to select [Various settings] and then press to display the Various settings screen.
4
Press v/V to select the item you want to change and then press .
This enables you to set each of the items
Note
When the photo frame is, for instance, displaying a slideshow, some items are unavailable for changing the settings. They are displayed in gray and cannot be selected.
5
Press v/V to select a setting value and then press .
Each time you press v/V (v/V from the photo frame), the setting value changes. In the case of a numerical value, press V to increase the value and press v to decrease the value.
If you press , the setting is confirmed.
6
Press MENU.
The menu closes.
Tips
• To perform this operation from the photo frame, press MENU, press the direction buttons to select the item, and then press ENTER.
• To reset the settings to their factory defaults, select
[Reset] and then press . Adjusted values except clock setting are reset to default settings.
3
Press v/V to select the item you want to change and then press .
The setting screen of the selected item is displayed.
For example, when [Slideshow Settings] is selected.
Continued
33 GB
Items to set
Item
Slideshow
Settings
Setting
Interval
Effect
Order
*: Factory default settings
Description
Set a value from 3 sec., 10 sec.*, 30 sec., 1 min., 5 min., 30 min., 1 hour, 3 hours, 12 hours, 24hours for the interval between images when the pattern is single view or calendar view.
Center cross
Vert. blinds
Horiz. blinds
Fade*
Wipe
Random
Filename*/
Shoot. Date
Transitions to the next image as though the previous image is being pushed from the center to the four corners.
Transitions to the next image as though blinds are being lowered vertically.
Transitions to the next image as though blinds are being pulled horizontally.
Transitions to the next image by fading out the current image and fading in the next image.
Transitions to the next image as though the current image is being wiped off the screen to reveal the next image.
Uses the above five effects randomly.
Displays images in the order of file name or shooting date.
Notes
• The setting that is selected in [Listing Order] of
[Screen Settings] is displayed as menu item.
• When the number of images exceeds 1,500, the images cannot be displayed by date. The images are listed in the order of their file names.
Random Displays images randomly.
Screen Settings LCD backlight Allows you to set the brightness of the backlight of the LCD screen to a level from 1 to 10*.
Brightness Allows you to set the luminance of images to a level from 1, 2*, 3.
Display Mode
Note
This function is not available when an image is displayed on TV with
HDMI connection.
You can select the view mode for the single image display.
Note
The original image data will not change.
Entire image*
Fit to screen
Displays an image in the original horizontal to vertical ratio with margins on the top, bottom, left and right.
Zooms in at the center of the image enough to fill the whole screen.
34 GB
*: Factory default settings
Item Setting Description
Screen Settings
General
Settings
Listing Order Sets the display order of images. This setting affects [Order] in
[Slideshow Settings].
Filename*
Shoot. Date
Displays images in order of file name.
Displays images in order of shooting date.
Auto image orientation
Auto display orientation
Auto power
ON/OFF
Image file size
ON*/OFF: You can set the photo frame to automatically detect and rotate the orientation of images.
ON*/OFF: When the photo frame is in portrait orientation, you can set it to automatically detect and rotate the images to their proper orientation.
Power-ON timer
You can set the timer (hour/minute) for the power to turn on automatically. Select [ON] to set [Auto ON time].
Power-OFF timer
Album*
You can set the timer (hour/minute) for the power to turn off automatically. Select [ON] to set [Auto OFF time].
Compresses images and saves them to the internal memory. You can save more images, but a deterioration in image quality compared to the original images is noticeable when the images are displayed on a large monitor via the HDMI OUT connector.
Control for
HDMI
Original Saves images to the internal memory without compressing them. There is no deterioration, but you can save fewer images.
ON*/OFF: Sets whether to enable or disable the HDMI control functions such as switching the TV’s input automatically to its video mode so that the images are displayed, and operating the photo frame with the TV’s remote control.
Sony logo ON*/OFF: You can set whether the photo frame’s Sony logo lights or not.
Sets the date, time, first day of a week, etc. (
Date/time settings
Language setting
Sets the display language on the LCD screen.
Japanese, English*, French, Spanish, German, Italian, Russian, Chinese (Simplified),
Chinese (Traditional), Dutch
Reset
Format internal memory
System
Information
Note
Default language setting may vary in some regions.
Returns all settings to their factory defaults except for date/time setting.
You can format the internal memory.
Notes
• All the images added to the internal memory will be deleted.
• Do not format the internal memory by using connection to PC or other external devices.
Version Displays the version of the firmware of the photo frame.
Internal memory
Memory capacity
Remaining capacity
Indicates the maximum amount of space available in internal memory in the initial state.
Indicates the amount of free space currently available in internal memory.
35 GB
Connecting to a high definition TV to view images
Connecting to a high definition TV
The photo frame is capable of HDMI output. If you connect the photo frame to a TV with an
HDMI input, you can display images in higher definition on the TV.
About “PhotoTV HD”
The photo frame supports “PhotoTV HD”.
“PhotoTV HD” is a function for expressing subtle textures and color tones in high definition, giving the appearance of real photos. You can combine Sony devices that support “PhotoTV HD” together to enjoy photos at beautiful full HD quality. You can enjoy beautiful photo quality such as the subtle portrayal of skin or a flower petal and the textures of sand and waves on a large screen.
Note
Depending on the original images, high-definition display may not be possible.
1
Connect the photo frame to the AC power source. (
2
Prepare a commercially available
HDMI cable.
Notes
• Use an HDMI cable that is less than 3 meters long.
• Use an HDMI cable with the HDMI logo.
3
Connect the HDMI OUT connector
(A type connector) of the photo frame and the HDMI input connector of the TV.
36 GB
High definition TV
To HDMI input connector
4
Press 1 (on/standby) on the photo frame to turn on the power.
5
Change the input of the TV.
If the connected TV is compatible with
HDMI control, the TV turns on automatically when you turn on the photo frame. Also, the input of the TV is changed automatically and images from the photo frame are displayed.
Notes
• Operation is not guaranteed with all TVs.
• If you connect a TV, the LCD screen of the photo frame turns off.
• If [Control for HDMI] is set to off in the
TV settings, the input is not changed automatically. The setting method differs depending on the TV. Refer to the operating instructions supplied with the
TV.
• If you are using a TV that does not support control for HDMI or the input is not switched automatically, change the TV’s input manually.
• The method of changing the input differs depending on the TV. Refer to the operating instructions supplied with the
TV.
Using the television remote control for photo frame
If your television supports the control for
HDMI, you can use the remote control of your television to operate the photo frame.
Notes
• We cannot guarantee operations with all types of televisions.
• When a remote control of your Sony TV is equipped with a link menu button, you can use the remote control to operate the photo frame.
Otherwise, you cannot use a TV remote control to operate the photo frame.
• To operate the photo frame, the %5$4, [Enter],
[Return] buttons support the HDMI control.
• If the HDMI control setting of your television is off, the television input does not switch automatically.
Settings differ depending on the television you use.
For details, see the manual supplied with your television.
• If [Control for HDMI] is set to [OFF], the input will
not switch automatically (page 35).
x Basic operations of the photo frame with a TV remote control
• Press %5$4 on the TV remote control to select the images on the single image display.
• Press [Enter] button on the TV remote control to switch the single image display and the slideshow display.
Note
With the TV remote control, you cannot do the following operation:
• Changing the VIEW MODE.
• Setting the MENU function.
• Zooming in/Zooming out
On control for HDMI
When the [Control for HDMI] is set to [ON], you can use the following operations:
• Turning off the photo frame power together with the television.
• After the photo frame is connected to the
TV, you can switch the TV input automatically to the photo frame by turning on the photo frame, or by connecting the powered-on photo frame to the television. If a television is on the standby mode, the television is also turned on.
• You can perform the photo frame operations using the TV remote control unit.
• If you switch the language of the TV while the photo frame and the television is being connected, you can also change the photo frame language automatically.
Note
To enable above functions, your television must support each function.
What is “BRAVIA Sync”
The “BRAVIA Sync” is a name of a feature of
Sony products that uses the HDMI control signals and enables you to control linked operations of a “BRAVIA Sync”-ready product from a BRAVIA control unit.
By connecting the photo frame and a
“BRAVIA Sync”-compatible TV with an
HDMI cable, you can use a BRAVIA control unit to perform linked operations.
37 GB

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Support for multiple memory card types
- Wireless image transfer via Bluetooth (optional)
- HDMI output for HDTV connection
- Various display modes (slideshow, single image, clock, calendar)
- AUTO TOUCH-UP features for image enhancement
- Internal memory for album creation