Using an external device
Using a Bluetooth device
You can connect a Bluetooth adaptor (optional) to the USB A connector of the photo frame and transfer images from a Bluetooth compatible mobile phone or other device. The transferred images are saved to internal memory.
1
Connect the photo frame to the AC power source. (
.page 17)
2
Press 1 (on/standby) on the photo frame to turn on the power.
3
Connect the Bluetooth adaptor
(optional) to the USB A connector.
4
Transfer the images to the photo frame by performing operations from the mobile phone.
Bluetooth compatible mobile phone
Transferring images from an external device
You can connect a digital camera, USB memory, or photo storage with support for mass storage to the photo frame and transfer images.
Notes
• Compatibility with all external devices is not guaranteed.
• If an external device is connected to the USB A connector on the photo frame, the photo frame cannot read the images in card media. Disconnect an external device, if you need.
1
Connect the photo frame to the AC power source. (
.page 17)
2
Set the digital camera or external device to mass storage connection mode.
The setting and operation method before connecting differ depending on the digital camera or external device. Refer to the operating instructions supplied with the digital camera or external device. (If you are using a Cyber-shot, set “USB
Connect” to [Normal] or [Mass Storage].)
3
Press 1 (on/standby) on the photo frame to turn on the power.
4
Connect the digital camera or external device to the USB A connector.
Use the USB cable supplied with the digital camera or external device to connect to the photo frame.
38 GB
External memory or other external device
Notes
• When using a commercially available USB cable, use an A-Type USB cable that is less than 3 meters long.
• Do not disconnect the USB cable or turn the photo frame and external device off while the access lamp on the external device is flashing. Doing so may damage the data in the external device. Sony assumes no responsibility for any damage or loss of data.
• A USB hub or USB device with a built-in USB hub may not work properly.
• The photo frame cannot use data that has been encrypted or compressed using, for instance, fingerprint authentication or a password.
Connecting to a computer
You can connect to a computer to view and copy images of the internal memory of the photo frame to the computer, and copy images of the computer to the photo frame.
System requirements
To connect a computer to use the picture frame, your computer must satisfy the following recommended system requirements.
x Windows
Recommended OS: Microsoft Windows Vista,
Windows XP Service Pack 2 or Windows 2000
Professional Service Pack 4
(pre-installed at the time of shipment from the factory)
Port: USB port
x Macintosh
Recommended OS: Mac OS X (10.4) or later
(pre-installed at the time of shipment from the factory)
Port: USB port
Notes
• If multiple USB devices are connected to a computer or if a hub is used, a problem may occur.
In such a case, simplify the connections.
• You cannot operate the photo frame from another
USB device being used simultaneously.
• Do not disconnect the USB cable during data communication.
• Operation with all computers that satisfy the recommended system requirements is not guaranteed.
• The photo frame has been demonstrated as operable with connecting to PC or Sony digital photo printer. When other devices are connected to the photo frame, these devices may not recognize the internal memory of the photo frame.
Continued
39 GB
Connecting to a computer to exchange images
1
Connect the photo frame to the AC power source. (
.page 17)
2
Connect the computer and photo frame with a commercially available
USB cable (optional: VMC-
14UMB2)*.
Note
When images of the computer are saved to the internal memory of the photo frame, the image files are saved without being compressed. As a result, fewer images may be able to be saved to the internal memory of the photo frame.
To USB miniB connector
Computer To USB connector
* This cable may not be available in all countries.
Note
Use a mini B-Type USB cable that is less than 3 meters long.
3
Press 1 (on/standby) on the photo frame to turn on the power.
4
Exchange images with the internal memory of the photo frame by performing operations from the computer.
40 GB