Feature Overview. Electrolux EI24ID50QS

Add to My manuals
64 Pages


Feature Overview. Electrolux EI24ID50QS | Manualzz

4 Feature Overview

H o w y o u r d i s h w a s h e r c l e a n s

Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while loading, then fills with water covering the filter area. Water is then pumped through the spray arms. Soil particles go through and across the filter and down the drain as the water is pumped out. This series of steps are repeated as needed. The number of water fills varies with the cycle being used.

Upper Spray Arm

Cutlery Tray

Tub Gasket

Cup Shelves

Soft Grip Rack

Middle Spray




Bottom Rack

Lower Spray




Rinse Aid


Adjustable Rack


Upper Rack

Flex Wash

Silverware Basket


Serial Label

(located on right side of door)

G e t t i n g S t a r t e d

To run your dishwasher, follow these basic steps:

1. Load Dishwasher (See Preparing and Loading Dishes).

2. Add detergent (See Dishwasher Dispenser & Detergents).

3. Add Rinse Aid, if needed (See Rinse Aid).

4. Select desired CYCLE (See Cycle Chart).

5. Select desired OPTION (See Energy Options).

6. Run hot water faucet nearest dishwasher until water is hot. Turn water off.

7. To start, press START pad and close door.


Related manuals