Using the Drive. Samsung SM-348B, CD Player

Add to My manuals
18 Pages

advertisement

Using the Drive. Samsung SM-348B, CD Player | Manualzz

Using the Drive

Using the COMBO Drive

To play audio or video CDs and / or DVDs in your COMBO drive, proceed as follows.

Push the power button and boot the computer.

After booting the computer, open the disc compartment by pressing the Eject button.

Insert the disc (CD/DVD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. The indicator light comes on.

Play the disc (CD/DVD).

Playing Audio CDs

Run the CD player supplied with Windows or your sound card.

You can listen to the CD by connecting an earphone to the earphone connection terminal.

Playing DVDs or Video CDs

Set up and run the SOFT MPEG program supplied as an accessory.

Storing and Cleaning Your Discs

To ensure a long service life for your discs and drive, follow the pre-cautions below when storing and cleaning your discs.

Do not place a disc in direct sunlight.

Store a disc vertically in a well-ventilated and stable location.

Do not write or attach a label on a disc.

Do not drop a disc or place heavy objects on it.

Do not touch the surface of a disc; hold it by the edges.

To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth.

Do not leave the disc compartment open when you are not using it.

English - 13

Using the Drive

Upgrading the Firmware Flash Memory

The product firmware can be upgraded by downloading the updated file from the following Web site: http://www.samsung-ODD.com

http://www.samsungelectronics.com/odd

System Requirements

Before you install the COMBO drive, we strongly recommend that you check that your setup meets the system requirements listed below.

Item Description

Computer

Free expansion unit

Disk space

Intel Pentium II 400MHz/Celeron 466A(or higher), 64 MB of RAM (or higher) with an

80pin IDE interface for Ultra DMA.

5.25 inch

700 MB minimum

Windows version

MS-DOS

Windows 98/2000/ME/XP/NT4.0 (or higher)

(For Windows NT, we recommend Service Pack2, and Version is over 4.00.1381)

5.0 or higher (For MS-DOS, The CD-R/CD-RW driver can only read a disc without premaster Software.)

DVD Video playback

PC with Windows 98/2000/ME/XP/NT4.0 DVD-Video playback software and appropriate hardware (the Power DVD MPEG software is included in the COMBO drive package)

DVD Region Protection Coding (RPC):

The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently, the motionpicture industry has divided the worldinto different regions or zones thatcorrespond to the regional markets intowhich the motion picture industry releasesmovies. Simply put, RPC codes are placedon movies marketed throughout the world,based on the region of the world inwhich they are being sold. These

RPCcodes help control and prevent piratingof new movies into other motion pictureregions prior to their true releasedates within those markets.

The SM-348 COMBO drive supports RPCphase II. In the RPC-2 mode, the localcode can be changed by users. RPC-2is selected by default for the SM-348 COMBO drive.

You can change the region code up tofive times via an MPEG application.

Please contact your dealer or local SAMSUNG representative if you wish tochange the local code more than fivetimes.

English - 14

advertisement

Related manuals

advertisement