Fitting. Honda UMK435E, UMK425E
The Honda UMK435E is a versatile and powerful brushcutter designed for both homeowner and professional use. With its 3-tooth blade and nylon line cutting head, it is ideal for cutting tall weeds, brush, and grass. The UMK435E features a 35 cc engine that provides plenty of power for tough cutting jobs, and its lightweight design and ergonomic handles make it easy to maneuver. Other features include a shoulder strap for comfortable operation, a translucent fuel tank for easy monitoring of fuel levels, and a quick-release air filter for easy maintenance.
advertisement
FITTING
GRIPS AND HANDLES
The bike type handle [1] (U type) or the loop handle [2] (L types) must be installed on the transmission tube [3].
[1]
[3]
CAUTION:
• U types: Position the handle between the two arrows [4].
Fitting is to be performed using the tools in the kit supplied with the appliance.
[5]
Spark plug wrench / Torx wrench
ATTACHMENT
PROTECTORS
Your brush cutter is supplied with a guard.
Install the guard on the machine with the four screws [8] and the spacer [7] supplied with the Torx wrench.
UTILIZATION WITH NYLON
LINE CUTTING HEAD
Fit the two sections [10] and [9] and clamp them into place as shown in the diagram. Screw the
3 screws and the washers by using the torx wrench.
[9]
[10]
UTILIZATION WITH BLADE
Do not fit the lower section [10].
SAFETY
A1 A4
B3 C11 D3
[4]
[6]
Hexagonal wrench
[7]
[8]
[3]
[2]
ASSEMBLING THE CUTTING
SYSTEM
B8
CAUTION:
• Pay special attention when fitting the spacer [13]. The concave side must face the transmission [15].
SAFETY
[14]
[15]
C11 D3
NYLON LINE CUTTING HEAD
[13]
With the spacer [13] already fitted on the transmission shaft, screw on the nylon line cuttinghead. It is tightened by turning counterclockwise.
Use the hexagonal wrench [14] to immobilize the transmission so that the nylon line cutting head is properly tightened.
3 - TOOTH BLADE
Place the grass-cutting disc [16] between the spacers [13] and [17] so that the grooves on the spacers fit perfectly onto the shaft.
Install the stabilizer [18]. Block the rotation of the shaft with the hexagonal wrench [14]. Securely tighten the locknut [19] in the counterclockwise direction with the appropriate wrench.
[7]
[14]
[13]
[16]
[17]
[18]
[19]
[6]
[3]
[2]
[1]
[5]
CIRCULAR SAW BLADE
(OPTIONAL ACCESSORY)
Assemble in the same way as the 3- tooth blades.
Ø200
[21]
[20]
Use of this accessory is restricted to the UMK435E1
UEET models only, and it must be fitted together with the special Honda protector [20].
Install the blade in the appropriate way. The arrow on the blade [21] must point in the same direction as the one on the protector [20].
FITTING AND
ADJUSTING THE
HARNESS
[20]
[7]
[8]
[17]
[18]
[19]
[9]
[10]
(UMK435E1 UEET)
While using the Honda circular saw blade [11]
(optional), always replace the standard protector [10] and [9] by the special Honda protector [12], available as an accessory.
Assembly is the same as for the standard protector.
[12]
4 EN
R
TA
[11]
For operator safety and comfort, it is important to adjust the harness straps so they can be worn comfortably and so that the machine is properly balanced in the working position.
Machines are supplied with a double harness [22].
Put on the harness and fasten it with the quick fastener [23].
Adjust the straps with the buckles [24] so that the machine hangs at hip height.
[22]
[24]
[23]
[24]
advertisement
Key Features
- 35 cc engine provides ample power for demanding cutting tasks
- 3-tooth blade and nylon line cutting head for versatility in cutting different types of vegetation
- Lightweight design and ergonomic handles for improved maneuverability
- Shoulder strap for added comfort during extended use
- Translucent fuel tank for easy monitoring of fuel levels
- Quick-release air filter for convenient maintenance