Advertisement
Advertisement
BN68-00653A-04Eng.qxd 9/18/04 2:22 PM Page 28
O
P E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to display the menu.
Press the UP/DOWN buttons to select “Channel”, then press the ENTER button.
2
Press the ENTER button.
Repeatedly press the
UP/DOWN buttons to cycle through these choices:
“Air”, “STD”, “HRC”, or “IRC”
(all cable TV).
Press the EXIT button to exit.
Note : STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected.
Proceed to “Storing Channels in Memory” (next page).
English28
BN68-00653A-04Eng.qxd 9/18/04 2:22 PM Page 29
O
P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source
(Air, STD, HRC, IRC).
See steps 1~2 on previous page.
2
Press the UP/DOWN buttons to select
“Auto Program”.
Press the ENTER button.
3
Press the ENTER button to select “Start”.
The TV will begin memorizing all of the available channels.
4
After all the available channels are stored, the Auto
Program menu reappears.
Press the EXIT button to exit.
To select channels over 100
Ex) Press to select channel 108.
The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.
Press the ENTER button at any time to interrupt the memorization process and return to the Channel menu.
English29

Public link updated
The public link to your chat has been updated.
Advertisement