Printer Configurations. Xerox 7760, Phaser 7760DX, Phaser 7760DXF

Add to my manuals
158 Pages

advertisement

Printer Configurations. Xerox 7760, Phaser 7760DX, Phaser 7760DXF | Manualzz

Printer Configurations

This section includes:

Standard Features on page 1-6

Available Configurations on page 1-7

Options on page 1-7

Standard Features

Maximum print speed:

■ 35 ppm (pages per minute) color

■ 45 ppm monochrome

Connections:

■ USB

■ Ethernet 10/100/1000 Base-Tx

Internal Hard Drive which enables the following job types:

■ Personal prints

■ Personal saved prints

Proof prints

Saved prints

Secure prints

Printing with saved jobs

Memory: 512 MB

Fonts:

■ PostScript

■ PCL

Trays:

■ Tray 1 (Multi-Purpose Tray)

■ Tray 2

Custom sizes including banners

Automatic 2-sided printing

Maximum resolution (dpi): 1200 dpi x 1200 dpi

Standard, enhanced, and photo print-quality modes

PhaserCal Software

Printer Configurations

Phaser® 7760 Color Laser Printer

1-6

Available Configurations

The Phaser 7760 Color Laser Printer is available in three configurations.

Printer Configurations

Features

1500-Sheet High-Capacity Feeder

(Trays 3, 4, and 5)

2500-Sheet High-Capacity Feeder

(Trays 3, 4, and 5)

Finisher

PhaserMatch Software

7760DN

Optional

Printer Configurations

7760GX

Standard

7760DX

No

Optional

Optional

Optional

No

Optional

Standard

Standard

Optional

Standard

Options

The following options can be purchased separately for the Phaser 7760 Color Laser Printer.

Print the Configuration page to see which options are installed on your printer. To print the

Configuration page, see

Information Pages on page 1-11.

Additional Trays

Tray 1 (MPT) and Tray 2 are standard on all configurations. The following additional feeders are available:

1500-Sheet High-Capacity Feeder, with three full width 500-sheet trays

(Trays 3, 4, and 5)

2500-Sheet High-Capacity Feeder, with one full width tray (Tray 3) and two Letter-/

A4-size trays (Trays 4 and 5)

Finishers

Two types of finishers are available. Both provide stapling and hole punching for a variety of paper and media.

Advanced Finisher

Professional Finisher: Can also fold and saddle staple output to create booklets.

These finishers are available with either a 3-hole punch or a 2-/4-hole punch.

Note: If you add a finisher to the Phaser 7760DN configuration, you must also add a

1500-Sheet High-Capacity Feeder or a 2500-Sheet High-Capacity Feeder.

Memory

All configurations have two memory slots supporting 512 MB DDR RAM modules. The maximum memory is 1 GB.

Phaser® 7760 Color Laser Printer

1-7

Printer Configurations

PhaserCal and PhaserMatch Software

PhaserMatch Color Management and PhaserCal Color Calibration software provide instrument-based color calibration tools. These applications use spectrophotometer measurements to achieve optimum calibration and can be used to create custom TekColor

Corrections for your Phaser 7760 printer.

PhaserCal software is a subset of PhaserMatch and comes standard on all Phaser 7760 Color

Laser Printer configurations. PhaserMatch software is standard on the Phaser 7760GX and

Phaser 7760DX configurations.

To order PhaserMatch software for the Phaser 7760DN, go to www.xerox.com/office/

7760supplies.

See also:

PhaserMatch and PhaserCal 4.0 User Guide at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

1-8

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents