Parameter Settings. Laview LV-T8204YHS, FT, LV-T8216YHS, LV-T8208YHS
The LaView FT Digital Video Recorder is a Linux-based device designed for video surveillance. It utilizes H.264 video compression and supports hard disk recording, TCP/IP transmission.
Advertisement
Advertisement
User Manual of LaView Premium HD Digital Video Recorder
Chapter 4
Parameter Settings
32
User Manual of LaView Premium HD Digital Video Recorder
4.1 Introduction of Main Menu
The main menu is shown in the following interface.
Figure 4. 1 Main Menu interface
Index Item
1
2
【Search】
【Video】
3
4
5
6
7
8
Table 4. 1 Description of Main Menu
Description
Search records by types, channels, time and playback records
Set basic, encoding, snaps and net channels
【Record】
【Network】
【PTZ】
【Alarm】
【System】
Set basic and record plan
Set base, advanced and apply network
Set parameters of PTZ
Set alarm information
Set basic, display, storage, abnormity, status, maintain, account and
RS232
【Shutdown】 It includes menu logout, shutdown and restart of the system
33
User Manual of LaView Premium HD Digital Video Recorder
4.2 Video Settings
This menu contains the basic video settings, video encoding settings, and the capture channel access and network settings.
4.2.1 Basic
Figure 4. 2 Basic interface
Index Item
1 【Channel】
2 【Channel name】
Table 4. 2 Description of Basic
Description
Select the desired channel
Select the channel name
3
4
5
6
【Channel display】
【Time display】
Set the position of the channel title
The position of the time title in the screen
【Time Synchronization】 Time synchronization of network channels and the device
【Video cover】 Set protected area of previewing and recording
34
User Manual of LaView Premium HD Digital Video Recorder
4.2.2 Encoding settings
Figure 4. 3 Video interface
Index Item
1
2
Table 4. 3 Description of Video
Description
【Channel】 Select the desired channel
【Compression】 H.264
3 【Resolution】 The resolution of main stream can be 720P/1080P. Different channels correspond to different resolutions. Frame rate setting
4 【Bit Rate】 range is also different. The channel extension stream resolution can support CIF / QCIF
Constant Bit rate or Variable Bitrates. Bit rate can be set in
5 【Audio】
Constant Bit rate. There are 6 levels for image quality in Variable
Bit rate, 6 is the best but it is fixed in Constant Bit rate
Choose channels record sound or not
Note
:
Resolution and frame rate are vary depending on DVR model.
Frame Rate: P system: a / s -25 frames / sec. N system: a / s -30 frames / sec.
4.2.3 Snapshot
Figure 4. 4 Snapshot interface
35
User Manual of LaView Premium HD Digital Video Recorder
Index Item
1 【Channel】
2 【Mode】
3
4
5
Table 4. 4 Description of Snapshot
Description
Select a channel
frequency】
Trigger: Crawl images when alarm
【Image Size】 CIF capture
【Image Quality】 There are 6 levels of quality
【Snapshot set highest capture rate for single channel,1s/pc 2s/pc 3s/pc 4s/pc
5s/pc 6s/pc 7s/pc 8s/pc
4.2.4 Net Channel
First, open the enable switch.
Figure 4. 5 Video-Net channel interface
Index Item
1
2
【Channel】
【Protocol】
Table 4. 5 Description of Net Channel
Description
Select the desired channel
Choose a protocol supported by IPCs
3
4
5
6
7
【Address IP】 Input the IP of the IPC
【Port】 Input the port of the IPC
【User name】 Input the user name of the IPC
【Password】 Input the password of the IPC
【Detect】 After completing of the above settings, click the detection button. The dev ice will connect with the IPC and return the
8 【Search】 connection status
Select an appropriate protocol and search.Double click the search results,and then the device will automatically be added and return to the network channel interface. You need to fill in the user name and the password
36
User Manual of LaView Premium HD Digital Video Recorder
Figure 4. 6 Search Device interface
37
User Manual of LaView Premium HD Digital Video Recorder
4.3 Record
Basic
Figure 4. 7 Basic record interface
Index Item
1 【Video mode】
Table 4. 6 Description of Net Channel
Description
Record automatically, manually or not record
2 【Video expiration time】 The figure is between 0 to 365
3
4
5
6
7
【Video package time】
【HDD full】
【Channel】
【Video redundancy】
【Prerecorded】
The figure is between 5 to 120
Overwrite or stop recording
Select a channel
Open or close the redundant recording
The figure is between 0 to 30
38
Record Plan
User Manual of LaView Premium HD Digital Video Recorder
Figure 4. 8 Record Plan interface
Table 4. 7 Description of Record Plan
Index Item
1
Description
【Channel】 Select a channel. It uses green, yellow and red to show motion detection, alarm and regular records correspondingly
2 【Copy】
Copy the settings to other channels
Click the set button to enter the following interface.
Index Item
1 【Time 】
Figure 4. 9 Record Plan interface
Table 4. 8 Description of Record Plan
Description
Recording time.6 periods can be set every day
39
2
3
4
User Manual of LaView Premium HD Digital Video Recorder
【Normal】 Normal record
【Moving Detection】 Moving detection
【Alarm】
Alarm record
40
User Manual of LaView Premium HD Digital Video Recorder
4.4 Network
Base
Figure 4. 10 Network interface
Index Item
1
2
3
4
5
【DHCP】
Table 4. 9 Description of Network
Description
Enable the DVR to obtain an IP address automatically. If it is enabled, the DVR will reboot and search for a DHCP server, and then assign a dynamic IP address. The dynamic IP address will be displayed in the menu. Enter a static IP address if there is no DHCP service available. If you are using the advanced feature PPPOE, then the
IP/mask/gateway and DHCP are unable to be changed.
【IP Address】 Use()or input numbers to modify IP, then set
【subnet mask】 and 【default gateway】for this IP
【First DNS Server】 DNS server IP
【Alternate DNS Server】 DNS alternate IP
【Physical Address】 physical address of current net port
41
Advance
User Manual of LaView Premium HD Digital Video Recorder
Figure 4. 11 Network advance interface
Index Item
1 【TCP】
2
3
4
【HTTP】
【UDP】
【Multicast】
Table 4. 10 Description of Network advance
Description default: 8000, variable default: 80 default: 8001 tick ‘Multicast’ and set a group in ‘Set’, IP should be limited as follow picture, port no limit
Net Apply
Figure 4. 12 Net Apply interface
42
User Manual of LaView Premium HD Digital Video Recorder
Index
1
2
3
4
5
6
7
Item
【DDNS】
【Email】
【FTP】
【NTP】
【IP Filter】
【Network
Transmission】
【Alarm
server】
Table 4. 11 Description of Network apply
Description
Enable the DVR to register a DDNS hostname, which runs on a fixed IP address web client. Select DDNS type(NO-IP DDNS,
Dyndns DDNS, HiDView DDNS and so on)Input the registered server’s IP, port, username and password. Once completed, you can login in the Web client by inputting the domain name in IE.
Enable the function. Set the SMTP server’s port, username, password, the sender’s mailbox and receiver’s mailbox
Choose to upload records or images.
Set FTP server’s IP address and port (Default:21) .
Create a account in FileZilla Server in the computer.
Fill in the username, password and remote directory which have been created. Set file length, channel, and time for recording, type and date and so on. Tick alarm, motion and general records or images to upload.
On/Off NTP. The network time protocol allows the DVR to sync with NTP server time automatically.
Server IP: Input IP of NTP server.
Port:The default port is 123.
Update cycle: The interval time is between 1 to 65535 min
DVR authority management. If you enable the white list, only the filled IPs can be connected. This system supports a max of
64 IPs.
Transfer modes and the number of network connections, downloads reserved interface
4.5 PTZ Configuration
Confirm the connection of PTZ A, B lines in the DVR and PTZ.
43
User Manual of LaView Premium HD Digital Video Recorder
6
7
4
5
Index Item
1 【Channel】
2
3
【Protocol】
【Address】
【Baud Rate】
【Data Bits】
【Stop Bits】
【Parity】
Table 4. 12 PTZ Configuration interface
Description of PTZ Configuration
Description
Select the channel
Select a associated protocol (e.g. PELCOD)
Set address. Default: 1
Note: this address has to correspond with dome address, or the dome will not be controlled
Select the baud rate. Default is 9600 default: 8 default: 1 default: None
4.6 Alarm
4.6.1 Video Detection
Figure 4. 13 Video detection interface
44
User Manual of LaView Premium HD Digital Video Recorder
3
4
5
6
Index Item
1
Table 4. 13 Description of Video detection
Description
【Channel】 Select a channel
2 【Alarm type】 Dynamic monitoring, video loss and video blind
【Process】
Open the enable switch
Set the alarming time, linkage and the handling method
【Area Set】 The function should be set in the remote IPC
【Linkage Set】 When a alarm occurs, you can set linkage of records,
PTZ, touring and snapshot
Figure 4. 14 Record interface
4.6.2 Alarm input
Enter [main menu]-[alarm]-[alarm out].
Figure 4. 15 Alarm input interface
45
User Manual of LaView Premium HD Digital Video Recorder
Table 4. 14 Description of Alarm input
Index Item
1
Description
【Alarm input channel No.】 Select a channel
2
3
【Enable】
【Type】
Select it
Normal Open and normal close
4.6.3 Alarm out
Figure 4. 16 Alarm out interface
Index Item
1 【Channel】
2 【Auto】
Table 4. 15 Description of Alarm out
Description
Alarm port
3
4
【Manual】
【Stop】
【Status】
Alarm output is determined by the alarm output menu, while in auto mode
Alarm output is on and the status is active
Alarm output is off and the status is inactive
5 Current status of alarm output
Note: Some models have no local alarm; please refer to the products descriptions.
46
4.7 System
User Manual of LaView Premium HD Digital Video Recorder
4.7.1 Basic
Figure 4. 17 Basic interface
Table 4. 16 Description of System Basic
Index Item
1 【System Time】
Description
Set the current time
2
3
【Daylight Saving Time
(DST) 】
【Date Format】
Click “DST” to enable the function, and enter the local DST starting and ending time
Modify the date display format
4
5
6
7
【Date Separator】
【Time Format】
【Language】
【DVR No.】
Select the separator for date
24 hr or 12 hr display mode
Select language
8
9
【Video Standard】
【Auto Logout】
Number more than one DVR, click “Ad” button on remote control and input a number to select the corresponding DVR to operate
PAL/NTSC
This ranges from 0-60 minutes. 0 means no setting.
DVR will automatically let user quit after standby time’s vacancy
10 【Channel mode】 The selection of local channels and network channels
47
4.7.2 Display
Output mode
User Manual of LaView Premium HD Digital Video Recorder
Figure 4. 18 Output Mode interface
Table 4. 17 Description of Output mode
Index Item
1 【Menu Transparency】
Description
Adjust transparency
2 【VGA Output】 Select VGA resolution. The default is
1024×768@60Hz
Tour configuration
Setting tour mode and interval between rotation , the time is within 5-120s,the mode include single screen, four-, eight-, nine-, sixteen-screen.
Figure 4. 19 Tour configuration interface
Table 4. 18 Description of Tour configuration
Index Item
1 【Motion Tour Type】
Description
Set the motion detection tour mode
2 【Alarm Tour Type】 Set the alarm tour mode
48
User Manual of LaView Premium HD Digital Video Recorder
Note: Shortcut Setting: click the button at the top right corner of the monitoring picture or press the Shift Key to switch, you can control the tour.
49
User Manual of LaView Premium HD Digital Video Recorder
4.7.3 Storage
HDD Management
Figure 4. 20 Storage interface
Table 4. 19 Description of Storage
Index Item
1
Description
【Format】 It is possible to format an individual HDD
2 【Set】 Set HDD as read-write, read only or redundancy mode. In read only mode, video data cannot be covered
Note: Hard disk format operation result in the loss of video data
HDD Record
Figure 4. 21 HDD Record interface
50
User Manual of LaView Premium HD Digital Video Recorder
Backup
Connect an External USB device with the USB port to backup in the “Record Backup” menu.
Figure 4. 22 Backup interface
Index Item
1
Table 4. 20 Description of Backup
Description
【Detect】 Identify external USB device and display the device
2 information
【Backup】 Tick the external device and click【Backup】to enter the backup menu .Select the record start-stop time and click
3 【Add】 Add files in list. Tick the record you want and click
【Start】to backup and display time remaining
4 【Delete】 delete all data in USB backup device
Note: this operation probably cause permanent data loss
4.7.4 Abnormity
Figure 4. 23 Abnormity interface
51
User Manual of LaView Premium HD Digital Video Recorder
Table 4. 21 Description of Abnormity
Index Item
1
Description
【Disk low Space】 Alarm when hard disk capacity is lower than setting
2
3
4
5
6
7
【No Disk】 Alarm when HDD is not present or cannot be detected
【Network Failure】 Alarm when network is not connected
【Process Mode】
【Send Email】,【pushed to phone】and recording linkage
【IP Conflict】
【Process Mode】
Alarm when IP address conflict is same as 【No Disk】’s 【Process Mode】
【Disk Error】 Alarm when there is error in reading and writing hard disk
8 【Process】 includes:【Alarm Output】, 【show message】,【Send
4.7.5 Status
You can see the BSP and on-line users.
4.7.6 Maintain
You can see logs of the system, product information, default settings and maintain information in the following interfaces.
Figure 4. 24 Maintain interface
52
User Manual of LaView Premium HD Digital Video Recorder
4.7.7 Account
2
3
4
5
Index
1
Item
【Add users】
Figure 4. 25 Account interface
Table 4. 22 Description of Account
Description add group member information and set authorities.
Default users are: “admin”, “user” and hidden “default”, the password of first two username is 123456. “admin” has advanced authorities; “user” only has surveillance and playback authority. Hidden default: operate in password-less login mode, cannot delete, DVR login in this name automatically if “no user login”,user can revise limits of power then operate some without login.
Enter【Add users】input username, password and select group and reusable options. Reusable allows the account to be used by multiple logins.
A user can only belong to one group. User rights cannot exceed group rights.
【Modify users】 modify existing group member information and authority
【Add group】 add group and set group authorities. Set a group and authorize 60 items including control panel, shut down, live view、playback, record, record backup, PTZ control, account, system information, alarm in /out setting, system configuration, search log, log delete, upgrade, operation authority, etc.
【Modify group】 modify existing group information
【Modify change password. Select a username input the old password and new
Password】 password twice. Click【Save】to confirm
Password can be in 1-6 numbers, letters or symbol; blank in beginning and end is invalid. The account with management authority could change others’ password.
Note: Group and user names can be from 1-6 characters in length. Valid characters include letter, numbers, and limited symbols: underline, subtraction sign, dot, you may not use a space as a leading or ending character.
There is no limit to the number of groups or users. By default there are two different group levels: admin and user. User management determined upon two levels: the group and the user level.
Group and user names cannot be duplicated, and each user can only belong to one group.
53
4.7.8 RS232
User Manual of LaView Premium HD Digital Video Recorder
Figure 4. 26 RS232 interface
Index Item
1 【Function】
2
3
【Baud Rate】
【Data Bit】
4
5
【Stop Bit】
【Parity】
Table 4. 23 Description of RS232
Description
Select the appropriate the serial
Set baud rate
Default: 8
Default: 1
None
Note: Some models are without an RS-232 port, please see Specifications.
54

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- H.264 video compression
- Hard disk recording
- TCP/IP transmission
- Linux-based OS
- ONVIF protocol support
- Mixed mode for analog and network cameras
- Real-time monitoring
- Recording, playback, and monitoring
- Advanced control technology
- Strong network data transmission capacity